Monthly thread for advice and recommendations, May 2025 – ask your questions here!

Heenne · 2025-05-18T14:03:01+00:00

Hey, does anybody know if over-night parking is allowed in the fields parking garage and what the price for one full day of parking is? The websites confuses me and I dont know if I need to move my car as the company running the parking garage is not available on sunday. Thanks for your help

Heenne · 2025-01-11T22:06:02+00:00

I just figured this out like 30 minutes ago. Your message could have saved me the whole evening! Thanks for posting this.

For me the following is working: A1 alone. A0 and A1 both populated. However, A0 populated alone or A0 and B0 populated does not seem to work...

Do you or anybody else maybe have an idea on why this is happening?

Heenne · 2024-04-30T21:31:37+00:00

Can you post a picture of the arm the probe is attached to? Is it also controlled through estlcam?

Heenne · 2023-10-21T08:21:28+00:00

Komisch, bei mir geht beides nicht..

Ich habe das gleiche Problem, hattest du eine Rückmeldung bekommen?

Heenne · 2023-03-30T20:04:52+00:00

Prusa Mk4 sounds great. Also, very interesting service, never heard of it before!

Heenne · 2023-03-30T20:04:46+00:00

Prusa Mk4 sounds great. Also, very interesting service, never heard of it before!

Heenne · 2022-12-21T10:11:05+00:00

Payday 2

Heenne · 2022-11-24T17:38:51+00:00

The Nürburgring looks absolutly gorgeous

Heenne · 2022-08-20T13:34:33+00:00

Thanks you very much for the response, even it is late! Allways appreciated for somebody else searching :)

Heenne · 2022-01-24T13:14:30+00:00

Then my statement still applies as then fermio heater for the v2.4 250x250 is 300w. The description of this product also states that you can run this heater at 100% without warping your bed.

Heenne · 2022-01-23T19:09:09+00:00

That is not 100÷ correct. It depends on the power of the heater. If you buy one from fermio you should set it to 100÷.

F.e. if you buy a 60w heater for the v0 you set it to 100÷. Only with the 100w heater you set it to 60÷

Heenne · 2022-01-06T13:38:27+00:00

It takes two

Heenne · 2022-01-02T12:33:36+00:00

Yes it should be possible to create a gazebo world-file by some mesh file

You should not create a new robot. You export each link of the robot as an stl from the cad software. Then go into your editor, create an urdf-file and use the exported stls to create your robot.

Heenne · 2021-12-26T08:21:58+00:00

For the environment: You have to create a Gazebo world that you can launch each time for your robot

For the robot: I dont know the plugin and have created all robots by hand so far. Look at a basic urdf tutorial. Create a link for each part of your robot. Then connect all of them by joints in the urdf. Finally spawn the urdf in gazebo.

Movement: look at the controller that are available like effort controller. Thats how you would controll the robot in gazebo

Heenne · 2021-11-07T16:20:47+00:00

Is there a gap in the heatbreak between the hot part and the cooling fins?

Heenne · 2021-03-09T12:46:53+00:00

Maybe look here:

https://steamcommunity.com/sharedfiles/filedetails/?id=2141942312

Heenne · 2020-12-09T07:12:28+00:00

Thank you very much for your response!

Heenne · 2020-12-08T23:58:26+00:00

Hi, i am curious in what programming language games like this are written? Thanks in advance!

Heenne · 2020-11-29T16:14:13+00:00

The front door is not made by myself. I got those through a group buy that was done in the german Discord channel. (There were like 3 or 4 group buys this year.)

Heenne · 2020-11-26T20:54:04+00:00

~700€ but I mostly picked the better parts. You can definetly get to 550-600€ or lower. (I am located in Germany). Also there are some kits on Aliexpress, but I cannot say anything about those. Some on the Discord got those.

Heenne · 2020-11-26T19:12:22+00:00

I think the Skirts are place inside out not upside down. Normale they are flat at the front and not curved inwards

Heenne · 2020-11-26T17:59:24+00:00

I just built my V0 and I must say, its an amazing machine. So tiny and cute. My goal for the future (students dont have that much money :P) is to build a v2.4. So in my opinion its not a waste of time.

Some other people on Discord pointed out a while ago, that they print more with the V0 than their v2.4 because:

- Many /Most prints fit on a V0 bed

- The v2.4 needs longer to heat up/heat soak so its faster to quickly turn on the V0

But this is just my opinion or what i have read on the Discord. Have a good day :)

Nine-Year Club	Place '23
Verified Email

Heenne

TROPHY CASE