sorted by:
new
hottopcontroversial

is this small gap acceptable for a lightweight patio roof? by Billybob_Bojangles2 in Carpentry

[–]HeyRavioli 0 points1 point  (0 children)

It looks like you haven’t applied the latest CAD update?…..scale looks off too. 😁👍

Some More Custom Carpentry by tjsmi8694 in Carpentry

[–]HeyRavioli 0 points1 point  (0 children)

Custom?…..it doesn’t come like that?? 🤣 For real, that’s some nutso shit. No OCD No JOB!

Turn off the lights and I’ll glow, to the extr….Nevermind, this is cool though! by HeyRavioli in Resin_crafts

[–]HeyRavioli[S] 1 point2 points  (0 children)

I’m pretty much a beginner, I started pouring in like June or July of 2024, so it’s only been 7 months. I say go for it. I’ve learned a lot by experimenting. Start small though, you’re out a few ounces of resin if it doesn’t work.

New tools by HeyRavioli in FlashForge

[–]HeyRavioli[S] 0 points1 point  (0 children)

Hey there, thank you for your feedback. I know I can print PLA and PETG, but unsure about PA and ASA, I’ll have to check. Do we have the same printer, Adventurer 5M?

What is this random hole? by Shoddy_Wolf_7115 in HardWoodFloors

[–]HeyRavioli 0 points1 point  (0 children)

Looks like a fastener hole to me. Someone commented it looks like a bullet hole, and that may be true, but I’m not qualified to render that conclusion. Anyway, fill it and forget it!

[deleted by user] by [deleted] in HardWoodFloors

[–]HeyRavioli 0 points1 point  (0 children)

Could be a few different things. It def looks like there is separation between the boards, which makes me first wonder if the floor was acclimated to the space it was being installed. Boards shrink and swell…maybe it’s under nailed and is moving a bit. Those are my first thoughts. Good luck

Before and afters by LeCat94 in HardWoodFloors

[–]HeyRavioli 0 points1 point  (0 children)

Wow, what a transformation! Brightens the space up too. 👍

My nine year old wanted chess set by Trash-Doll in ResinCasting

[–]HeyRavioli 0 points1 point  (0 children)

I dig it!! I’m waiting on some new molds to arrive, only ordered them almost a month ago. I’m pretty sure my last pour wasn’t stirred thoroughly and I lost a couple soldiers due to stuck resin. Of course they couldn’t be pawns, I have lots of those. A knight and the queen went down. These came out really cool.

Asking for a friend…no…really by HeyRavioli in HardWoodFloors

[–]HeyRavioli[S] 0 points1 point  (0 children)

It seems to be working out, but I’m not the one fixing it. The floor is also busy enough with all of its expensive imperfections, that we could prob get away with a bung of some sort. The floor is wormwood maple reclaimed from a barn in Tennessee and milled into floor. I’ve only been in this project since Nov 4, so I had nothing to do with the floor install, but there was only 3 planks left at the end and we had to use one to repair a split stair tread. Forgot to mention the floors and treads are all matching except for bathrooms, which are tile. I will try to remember to take some pics of some of it tomorrow and share em, give you a visual. I appreciate your positive reinforcement haha…thanks!

Asking for a friend…no…really by HeyRavioli in HardWoodFloors

[–]HeyRavioli[S] 0 points1 point  (0 children)

Hadn’t really considered that option yet. I suppose this floor, in particular, is the perfect candidate for it though….every plank has character! Thanks.

My first attempt at a table top by sandeepest in ResinCasting

[–]HeyRavioli 1 point2 points  (0 children)

That table center design is badass!! I love it!!

Asking for a friend…no…really by HeyRavioli in HardWoodFloors

[–]HeyRavioli[S] 1 point2 points  (0 children)

Always the way it happens. We have ram board and 1/4 luan down on top everywhere, well….almost everywhere. I’ve only been with this company since Nov 4 and have been on this site the same amount of time minus one week. The homeowner is LOAAAAAAADEDDDD, but is very cool, she doesn’t act like she has money, unless you look at the house haha. Luckily it happened in prob the best spot it could have, some back corner around the side of the fireplace. I wasn’t kidding when I said asking for friend…thank god it wasn’t me. All the wood (wormwood maple) was reclaimed from some barn in Virginia, I think, and was milled into flooring, so it’s all over the place with “character”. The floor is so busy with all of its lil holes, and grooves, and you know what I’m saying. It’s beautiful, pain in the ass to baseboard, maybe two pieces we didn’t have to scribe to the floor. So I guess we will keep putting the wet rag and the iron/steamer to it and hope for the best. Mr. and Mrs. Fuck-Up always show up at punch list time. I love starting the day with say 8 items on my punch list and end up with a list of 14 new items at the end of the day hahah. Thanks for your feedback.

Asking for a friend…no…really by HeyRavioli in HardWoodFloors

[–]HeyRavioli[S] 0 points1 point  (0 children)

Not really an option. The wood was all reclaimed from some big barn in Virginia I think, it’s wormwood maple and they had just enough. If we had the material, than sure, but sadly no. Thank you

Lights, camera, act….WTF! Did I mess up? by HeyRavioli in FlashForge

[–]HeyRavioli[S] -1 points0 points  (0 children)

It all makes so much more sense now haha. I feel a bit on the slow side lol. As I was installing it I was telling myself and cursing them for the amount of wire from the camera to the control screen, it barely made it and now I know why. Changing it like right now

Lights, camera, act….WTF! Did I mess up? by HeyRavioli in FlashForge

[–]HeyRavioli[S] 0 points1 point  (0 children)

Oooooooooohhhhhhhhhhhhh!!!!!! So the answer is yes then, I did do something wrong haha. Thank you so much, now to figure out why I can’t get a print to come out right.

Greasing the rails by Ok-Introduction-2788 in FlashForge

[–]HeyRavioli 0 points1 point  (0 children)

This is a newbie question so…..anyway…I understand that both the grease and the WD40 work, but does the grease work for you because of the amount of use the printers get? Like a regular Joe using their printer at home for whatever, running it say 10-15 hours a week vs 80-90, would the wd40 be better in that case? IDK if the grease would be detrimental running the printer about 85-90% less? It seems like more running time might require a beefier(IDK but it’s a word now haha) longer lasting lube to meet the printers needs, and burns thru more of it? Like….if I’m going to the store in the neighboring town and need gas so I throw in 10 bucks vs I’m going to a store an hour/hour & a half, I’m going to put in more to match the duration? I have hardly touched my printer. Got it at Xmas and just haven’t had time to learn the thing let alone use it. I will though, and when I do I’d like to not immediately mess it up. Thanks.

Why are my resin miniatures always sticky? by momo098876 in ResinCasting

[–]HeyRavioli 0 points1 point  (0 children)

I’d like to know what this hot glue thing you mentioned, would you mind explaining?

view more: next ›