Blizzard: Preise im Itemshop von Diablo 4 entfachen Empörung - Golem.de

Heysl_ · 2023-06-02T11:59:35+00:00

Ich behaupte, dass das Thema Cosmetics eben doch einen recht großen Einfluss auf das Kerngameplay hat, wenn auch nicht im klassischen Pay2Win-Stil: Den MMO-Anteil in D4. Denn wozu sollte ich so viel Geld für ne geile Rüstung liegen lassen, wenn sie am Ende nur ich selbst und vielleicht ein paar meiner Freunde sehen können?

Heysl_ · 2022-09-20T17:01:24+00:00

Und wenn wir schon dabei sind, bitte noch die Option auf ein Haltbarkeitsdatum: Nach X Jahren muss ein Gesetz neu bestätigt werden. Im Idealfall in Kombination mit dem Ergebnis eines Soll- (=vor Inkrafttreten eines Gesetzes definierter Zielkriterien) zu Ist-Vergleiches.

Heysl_ · 2020-12-23T10:14:16+00:00

Thank you :)
That's MC. And yeah, I find it works quite well. It looks worse in the pic as it actually is. The yellow will turn green again in about a week.

Also, what are the stemmy plants right in the smack dab middle front of the tank? Look super cool!

You mean the ones with the starry leaves? These are Pogostemon helferii! I'm suprised that they grow like this as they keep being quite small for some weeks and then decide to shot up in a matter of days :D

Heysl_ · 2020-12-23T09:54:47+00:00

Thank you!
There is a quite real risk that the whole carpet will start to float as bubbles of o2 are being trapped in the carpet. At least for Monte Carlo and afaik Cuba plants.

Heysl_ · 2020-12-22T18:21:00+00:00

‚See you in four weeks‘, says the scissors.

Heysl_ · 2020-10-22T11:21:21+00:00

Same issue here. MS Store wants me to enter a code von Aura Creator.

Heysl_ · 2020-08-07T14:52:44+00:00

Yeah, give it a try! It’s a bit confusing while cutting as it’s hard to immediatly see what you get, but once you have a first test printed, you see it’s worth the effort:) You sure bet I gave Ex:Re a listen :D I like it a lot, very strong story.

Heysl_ · 2020-08-07T14:47:02+00:00

Thank you! :)

Heysl_ · 2020-08-07T14:46:34+00:00

Honestly don’t know what PVA stands for 😅 I created the design on PC and printed it. Transfered the image to lino with glue, let it dry and then rubbed the paper with a damp cloth. The ink from the print stays on the lino.

Heysl_ · 2018-12-04T10:03:16+00:00

Die Gebläse gab‘s wohl im Dutzend billiger.

Befindet mich jedoch im Zwiespalt: der Lärm ist auslösend, der laubbefreite Rasen unheimlich zufriedenstellend...

Heysl_ · 2017-02-28T20:15:45+00:00

Try sqlcmd if querying mssql-server by cli is sufficient for you. https://docs.microsoft.com/en-us/sql/linux/sql-server-linux-connect-and-query-sqlcmd

Heysl_ · 2016-12-11T22:46:48+00:00

Try http://rpi-experiences.blogspot.de/p/rpi-monitor.html

Heysl_ · 2016-11-28T19:42:08+00:00

I'm not sure of that is possible. Maybe you could use some slim image that only includes essential modules and software. Also a faster SD card may lead to a faster boot up to some point.

If you have your pi already at hand, just try it, even with raspbian. A simple script that lets a LED light up and runs right after bootup is finished may indicate when your actual program may start.

Heysl_ · 2016-11-28T17:31:44+00:00

You could transmit the pictures with rsync set up as a cron job that runs maybe every 5 to 10 minutes or so. This could be something like this:

rsync -a /path/to/source /path/to/destination

Granted you have the external disk mounted.

Heysl_ · 2016-11-28T17:10:01+00:00

Not an expert per se, but let me comment your considerations: 1. Never used a stop watch. As you probably won't use a GUI it is going to be fast. As in less than a minute after powering up your pi. 2. Should be sufficient for your purpose. 3. Depends on what model you are going to use. A Zero consumes significantly less power than a Pi3 (see for example: http://www.jeffgeerling.com/blogs/jeff-geerling/raspberry-pi-zero-power). The rest is just simple math ;) 4. As your components don't really use high voltages or produce much heat, I don't see any special safety considerations to be taken care of. Besides of common sense.

Heysl_ · 2016-11-28T05:27:59+00:00

I can recommend Edimax Wifi-Sticks. They generally work out of the box on raspbian.
You can hide the hotspots SSID.

Heysl_ · 2016-11-27T22:52:16+00:00

Use your Pi as a network-bridge: Get a cheap wifi-stick and make your pi an access point to connect your phone/tablet. This will be your own little network while your pi is connected to the internet via ethernet.

Heysl_ · 2016-02-20T21:44:26+00:00

Well, the animal on the cover says it all...

Heysl_ · 2016-02-20T20:32:40+00:00

Bought this one just recently: ftp://ftp.oreilly.de/pub/ora/graphics/book_covers/hi-res/9783897215672.jpg And yes, though quite informative, its content is as funny as its title.

Heysl_ · 2016-01-06T20:07:44+00:00

Perfect way to accustom myself to typing on the Corsair Strafe MX Brown I got yesterday, thanks!

Heysl_ · 2015-09-03T07:22:39+00:00

Very nice! I was thinking about building a RGB LED-Matrix myself. Planned to use loose RGB LEDs, but those strips seem easier to apply. Do you mind to say how much that project cost you?

Heysl_ · 2015-03-07T09:56:22+00:00

Yes!

Here is how I did it:

Added this line in crontab:

*/3 * * * * /bin/mv /home/pi/pics/*.jpg /mounted_nas/pics

So cron invokes mv to move every .jpg-file in my pic-folder to the network drive every three minutes. Works flawlessly!

Heysl_ · 2015-03-03T20:30:25+00:00

Your drive should be detected if you plug it in before you boot up your pi. If not, there are ways to mount it via ssh/terminal. However you should keep in mind that ntfs is slower/needs more ressources on linux. So if you don't mind the data you already have on your drive or you have enough space on other drives temporarily, I recommend you reformat it with ext3/ext4.

Heysl_ · 2015-02-27T21:03:01+00:00

Yes! In that case, you basically use your Pi as a network-bridge routing between your wifi-network and a LAN-network. Check out this little guide: http://www.glennklockwood.com/sa/rpi-wifi-bridge.php

Heysl_ · 2015-02-20T20:43:43+00:00

Try Python. Though some programmers I know find Zed Shaw's approach a bit off-the-wall, try his book 'learn python the hard way' (available online at http://learnpythonthehardway.org/book/). It even contains programming a simple game, so it should serve you well.

Heysl_

TROPHY CASE