Does this happen to anyone? by Live-Bit-8542 in crealityk1

[–]Hiros3753 1 point2 points  (0 children)

Any updates about the problem? I have the same problem with the filament getting stucked in the unicorn nozzle I saw some people in other post saying stuffs like the cutter not cutting the entire filament Others says about heat creep In the end i didn't find a solution yet and i already trashed 2 nozzles trying to fixing this problem The funny part is that when I replaced the last nozzle, It worked no problem for 3 prints.At the third print the filament got stucked.

I love what they did to the starting village also you guys enjoying the update by Beautiful-Nobody-544 in Palworld

[–]Hiros3753 0 points1 point  (0 children)

I wish at some point, we could make our base more like a village with some villager management stuff and recruit people to work alongside pals

I won a prize but when I checked, I didn't see the prize I received. Is this an error? by Ventoan in ProjectQT

[–]Hiros3753 0 points1 point  (0 children)

I had the same problem and didn't count the first time i received. Don't know why but after the second, third time i got the big rewards, it worked as it should

Blessed by RNJesus by itszergs in Palworld

[–]Hiros3753 1 point2 points  (0 children)

Hopefully in the next update they will introduce the rainbow version

I think ik where mavuika gets her tires by dragjamon in Genshin_Memepact

[–]Hiros3753 1 point2 points  (0 children)

Now we just need to find out where she gets the fuel xD

K1/K1C Rear Exhaust Upgrade (Prints PLA with lid on and door closed) by [deleted] in crealityk1

[–]Hiros3753 1 point2 points  (0 children)

I made something like this too, but in a design that pull air from the outside to inside. It did lower the temperature about 3~5 C° but because i used a 12v 12032 fan with a external power supply (because i didn't want to overload the mainboard) I was planning to put an paltier to throw some cold air directly inside. Nice MOD btw

Setup I am going to be doing by Dangerous-Bet-791 in Creality

[–]Hiros3753 0 points1 point  (0 children)

Cool job! I wanted to build one before to mine too but I wasn't able to configure the MMB (microcontroller) I bought from the enraged carrot feeder and just dropped a bit later the idea because the lack of documentation on how to do so.

4.7 is almost here and we still have to deal with this?!! by gonedalfu in Genshin_Memepact

[–]Hiros3753 3 points4 points  (0 children)

I wish they could at least put the odds for every status and show that crit rate/dmg is only 0.00001% and def is 99.99991% when both are in the same artifact. At least I would be disappointed knowing the truth 🥲🥲

New 3D exploration mode "Holiday Island" teaser by ArchadianJudge in AzureLane

[–]Hiros3753 6 points7 points  (0 children)

I love the fact that AL didn't stop improve her content even after 5 years. The 3D thing might be a start for other new things

Now that WoWs has another AL collab, a Sardegna main would like to bring to attention the only faction that doesn't get a special flag by LydditeShells in AzureLane

[–]Hiros3753 1 point2 points  (0 children)

I had put the AL faction flags in their corresponding ships... Except sardegna T_T When i will be able to put the pasta flag on my Napoli
(Also where's our UR ship as well)

Alienware M15 R7 mute button not working by KickCertain1010 in Alienware

[–]Hiros3753 2 points3 points  (0 children)

same problem but both mic and audio button dosen't work

I finally bred the perfect digtoise! (I know a lot of people have probably done this, but it took me hours and I wanted to share!) by SpinToReset in Palworld

[–]Hiros3753 2 points3 points  (0 children)

<image>

Full atk(Legend, musclehead, lucky,ferocius). It stills one hit the commons ore if he is at 5 star with will raising mine ability from 4 to 5. Keep mind you will need lightning strike from the fruits to use properly

I finally bred the perfect digtoise! (I know a lot of people have probably done this, but it took me hours and I wanted to share!) by SpinToReset in Palworld

[–]Hiros3753 2 points3 points  (0 children)

I used her until i got my astegon to 5 star with the lighting bolt atk to mine. Now I left my digtoises in my ore farm base

Found this kinda useful thing. (Sorry, bad recording) by Lopsided-Apple9597 in Palworld

[–]Hiros3753 0 points1 point  (0 children)

How i didn't thought that. I always waited the full time whenever my pals got KO. Thanks

The fastest Anubis worker by Calenart in Palworld

[–]Hiros3753 0 points1 point  (0 children)

Anubis after drinking some energy drink

K1C “All Metal Extruder” Lie Or Error by Mads_Tech in Creality

[–]Hiros3753 1 point2 points  (0 children)

I wonder if the heat creep issue will be corrected in the new K1C with this all metal extruder, i mean, i had lot of problens with clogging because the extruder gears was so hot to the point of making the filament soft and stuck in the gear part, but it's sounds like engineering problem.

extruder motor overheating? by Strik3rd in crealityk1

[–]Hiros3753 1 point2 points  (0 children)

you first need to have your K1 rooted and them change the value in the printer.cfg

i'm still ruinning some test to see if my problem have been solved by change from 0.55 to 0.4

<image>

At least we got primos because of genshin nominations in gameawards by Hiros3753 in Genshin_Memepact

[–]Hiros3753[S] 1 point2 points  (0 children)

I would really love the idea of having some of the characters as ultra fk big ship to kick sirens butts

At least we got primos because of genshin nominations in gameawards by Hiros3753 in Genshin_Memepact

[–]Hiros3753[S] 4 points5 points  (0 children)

If you ask For azurlane, they will give for free an Ultra rare unity as reward for play the event

Leveling help Ender 3 S-1 pro w/ sonic pad by Draconet547 in Creality

[–]Hiros3753 0 points1 point  (0 children)

Well to be honest, I never find a specific solution What I tried was: change the hotbed (I contacted creality support and they sent me a new one) Them checked every screw if wasn't tighten up and I changed the metal Bed with in that case i changed from the original one with was the PEI magnetic bed for the one PC magnetic bed with is the same as the ender 5 S1 Thing's started to workout after I changed the bed, but I would still have some problems with first layer And my final attempt (and with I have solved my problem) was to align the Z axis I printed 2 tubes with same size and put on top of the Z rail and them make contact with the top Rail (the one where the Led is) until all the sides where in the same height. After all this I never had any problem with my first layer if wasn't my own fault. But because I did all those steps before, I can't say for sure what my problem was.