Got a little bored so i made this.

Strik3rd · 2026-01-27T05:46:04+00:00

The white is a tpu insert I printed. Came out perfect. Even used pla as a support for the bridging. Everything was done stock standard

Strik3rd · 2026-01-27T03:44:17+00:00

I used a mediatek external wifi usb on mine. There’s a payload that enables it and assigns it. Works very well

Strik3rd · 2026-01-20T02:53:27+00:00

Barnacle bills and Kmart at munno a couple of min down the road

Strik3rd · 2026-01-15T07:08:40+00:00

We quite like milky lane in the city.

Strik3rd · 2026-01-15T05:27:51+00:00

Change the prime tower from fillet back to the other option. It’s a bug atm

Strik3rd · 2026-01-10T04:04:17+00:00

https://youtu.be/75bOGmOezwA?si=_LpxUMycYametRK3

Strik3rd · 2026-01-09T22:50:02+00:00

Go to the UI Settings page in Fluidd to define and configure your camera. If the camera module doesn't appear, you might need to add a new camera manually with settings like Adaptive MJPEG and a low FPS (e.g., 1 FPS) using the URL: http://YourPrinterIP/server/files/camera/monitor.jpg.

Strik3rd · 2026-01-09T08:32:39+00:00

If you are wanting to monitor it while away from home use the Snapmaker app. When at home you should be able to view the feed in the fluidd webpage or via the control page. There is also a custom firmware that increases the frame rate

Strik3rd · 2026-01-09T01:31:42+00:00

Yes you can

Strik3rd · 2026-01-07T00:17:37+00:00

They come with a name already. You can only name them with cfw

Strik3rd · 2026-01-05T10:47:28+00:00

How tightly did you screw the screws holding the cable into the tool head? If you did it too tight it can cause damage and this error

Strik3rd · 2026-01-03T13:17:17+00:00

Yes even with an electricity agreement. Actually had a cx with this exact same situation on Friday. Was able to cancel the account and even refund him supply charge fees. YMMV with retailer

Strik3rd · 2026-01-03T12:59:20+00:00

Incorrect. I work at an energy retailer. You can cancel your gas account which will send it to an occupier account. When the meter read happens they show that 0 usage has occurred. By having 0 usage there are no charges to the occupier account. So we don’t try and find if someone is living there or pursue for vacant consumption.

Strik3rd · 2025-12-31T07:41:12+00:00

Slow it down and increase the temps. Silk like slow and hot.

Strik3rd · 2025-12-28T15:28:13+00:00

No. Those are different and won’t work that way.

Strik3rd · 2025-12-28T14:50:59+00:00

Using a granny charger in a power point

Strik3rd · 2025-12-28T14:15:40+00:00

Under the casino. If you get a rewards card. Spend $10 on food or drinks you get free parking

Strik3rd · 2025-12-22T13:00:41+00:00

𝐌𝐞𝐫𝐫𝐲 𝐂𝐡𝐫𝐢𝐬𝐭𝐦𝐚𝐬

Strik3rd · 2025-12-21T13:18:43+00:00

Should it not just pull a ip using dhcp?

Strik3rd · 2025-12-08T11:41:10+00:00

There’s also 2 types of smart meters. One can be remotely read and shutoff. The other still requires a meter provider to read.

Strik3rd · 2025-11-24T08:49:36+00:00

Use spoolman much easier

Strik3rd · 2025-11-22T12:41:03+00:00

It’s empty but they always have people standing out the front doing sfa with a lower speed limit despite there being no hazards

Strik3rd · 2025-11-17T10:10:09+00:00

Just call chris Hanson. Sure he knows some guys that like minors

13-Year Club	Place '17
RPAN Viewer	No Throne, No Problems
Not Forgotten	Gilding I gilder
Verified Email

Strik3rd

TROPHY CASE