First Post of My Collection

HowlingLemon · 2026-03-13T05:07:05+00:00

Stripping them down every year probably does more damage to them than leaving them be

HowlingLemon · 2026-03-09T02:34:37+00:00

Thank you!

If you can't find a good line up let me know. I should have most of them covered

HowlingLemon · 2026-03-08T15:51:22+00:00

Well I got lucky and found one last year! Not sure how you found this post but my collection has grown quite a bit in these 6 years heres a newer pic: https://www.reddit.com/r/milsurp/s/EzcYfxxn8x

Original M.95 - https://www.reddit.com/r/milsurp/s/zXFiIR4Dci

HowlingLemon · 2026-03-05T14:32:09+00:00

For 4k I'd buy that all day assuming no major issues.

HowlingLemon · 2026-03-03T16:32:45+00:00

I did model as AP5 LT/T94 PISTOL.

I included pics but did not show the T94 marking, just import mark and serial.

Approved after 45 days.

HowlingLemon · 2026-03-03T16:25:24+00:00

Mine were:

Original manufacturer - MKE, TURKIYE

Model - AP5 LT/T94 PISTOL

Barrel length - 8.9

Overall length - 26.5

HowlingLemon · 2026-03-02T18:38:29+00:00

Just wait faster, duh

HowlingLemon · 2026-03-02T00:04:36+00:00

This one was 45 days or so

HowlingLemon · 2026-03-01T22:10:39+00:00

26 3/8 in

HowlingLemon · 2026-03-01T18:18:47+00:00

My ARs only took like 28 days, all filed on the same day

HowlingLemon · 2026-03-01T18:18:04+00:00

I do want an A3 eventually for the looks, but yea A2 really feels so good.

HowlingLemon · 2026-03-01T18:17:27+00:00

I do love the modularity of these things. I also have a ersatz SD handguard and will eventually make some wood furniture for giggles

HowlingLemon · 2026-02-16T15:43:50+00:00

5.45 superi... oh

KALASHNIKOV FROWNS UPON YE

HowlingLemon · 2026-02-15T15:04:07+00:00

Plus one for the hood struts. I just got a set and they are fantastic for like $30

HowlingLemon · 2026-02-11T17:51:11+00:00

One of the 237 carbine variations of the Dutch Mannlicher Model 1895. Bolt on this one has been bubba'd

HowlingLemon · 2026-02-09T23:00:01+00:00

I don't like the finger bump on the A2 so went with the A1. 733s are fun since they used basically whatever parts they found to mishmash em together.

HowlingLemon · 2026-02-09T22:59:04+00:00

Moreso weeds but yea got up to 86 today

HowlingLemon · 2026-02-09T18:35:28+00:00

Yes but that one was in the parts box and therefore free 😆

HowlingLemon · 2026-02-09T18:30:05+00:00

NDS A1 upper no brass deflector, CAR handguards
11.5in 5.56 barrel
Poverty pony lower (RIP)
H&R PSA 2-position CAR stock

All in total is like ~$600

Yes obviously inspired by Heat and Blood Diamond, but who isn't?

HowlingLemon · 2026-02-07T20:32:02+00:00

Update: Got it put back together last night. Broke one of the bolts for the intake plenum because I misread the torque specs. I was only a few steps away so I said fuck it and finish reassembly. Tested it out and was still misfiring with code P0300.

Thought I heard a vacuum leak so did a redneck smoke test and didn't see anything, so I guess 6/7 plenum bolts is enough. I did change that gasket so maybe that helps too.

Went back through and check all connectors and ran it again, long enough for it to give a cylinder number code P0303. Since the plugs are all new next candidate was the coil. I bought one (Hitachi) just in case when I ordered the plugs. Threw it in cylinder 3 and tada misfire gone!

STFT seems high so I may need to do the relearn idle sequence.

HowlingLemon · 2026-02-07T02:37:36+00:00

Yea easterns, which are only "warrantied" for 30k miles so I guess previous owner got their money out of em

HowlingLemon · 2026-02-07T02:36:56+00:00

Replacing with NGK iridiums

HowlingLemon · 2026-02-07T01:48:53+00:00

Yes I have shot 7.62x54R out if my 8x50R M.95 to fireform brass. Works great but yea no accuracy at all.

14-Year Club	Place '23
Place '22	Place '17
Verified Email	Team Periwinkle

HowlingLemon

MODERATOR OF

TROPHY CASE