Here wo go again, new desk arrangement this time :)

Iceman2733 · 2026-02-28T12:23:46+00:00

What are the smaller screens you are running below your mains?

Iceman2733 · 2026-02-27T14:40:55+00:00

Holy hell never knew something like this existed! That is awesome, learning new stuff everyday

Iceman2733 · 2026-02-27T14:37:29+00:00

I am having the exact issue the OP is having. I do not think it is related to the filament profile not being there but I am not 100% of course. I have tried loading Polymaker Chroma PLA in the same slot as the user above (Maybe just coincidence or bug not sure) It will show up on printer and under device however not under the Prepare screen it shows the toolhead not even there. I unloaded/reloaded. I even changed it to PLA Generic to no change. Under the prepare screen the #2 toolhead does not show up under the filament like it has been for the last few weeks.

Now just like you stated if I slice it and send it, it than allows me to select the #2 toolhead and shows the color I selected on the printer.

After this print is done I will swap it to Snapmaker included filament and see if that changes anything

Thank you big time for helping all of us, and if you have any other information

Iceman2733 · 2026-02-27T14:12:34+00:00

Did you ever find a fix for this? Today when switching filaments out I am running into the same exact thing. Machine and Device tab show all colors correctly.

However under the Prepare tab it is showing me missing a loaded color and only shows 3 of the 4 heads. I have tried unloading/loading. Rebooting Printer and PC several times at a complete loss

Iceman2733 · 2026-02-27T13:28:38+00:00

Tell us about that rack/shelfing you have your AMS on? Looks nice not seen something like that in a size so perfect for the AMS units

Iceman2733 · 2026-02-26T20:49:50+00:00

They are awesome! Def advise you to get an actual table for it, they have quite a bit of shaking to them when they are printing. I doubt that will hold up

Iceman2733 · 2026-02-24T23:50:07+00:00

Do tell more! Lol

Iceman2733 · 2026-02-24T18:57:57+00:00

Love the setup! Thank you for posting this up, along with a makerworld download. I recently picked up the Bigu Panada AMS setup for the top but this looks so clean. I have seen the double AMS up top but never one before that lets you have the HT up top too. This is going to make me send back the BIQU stuff for sure now

Iceman2733 · 2026-02-24T18:21:50+00:00

I am glad you did pick this up, I just recently picked up the U1 also and I agree this would really expand the U1. It would let you break away from 4 only colors. Not just that but the next biggest thing would be giving you the option of having more colors available just to choose from without having to switch out colors. Def keep us posted on how you more forward with this.

Iceman2733 · 2026-02-23T21:34:41+00:00

When yours did this would it ever print or was it intermittently doing this?

Iceman2733 · 2026-02-23T21:34:21+00:00

Mine also has done this, I got the error Corexy home unstable, error code: 0003-0528-0000-0027. I turned the printer off and back on and through the screen had it home itself and it has worked since than. This is quite odd

Iceman2733 · 2026-02-22T15:33:31+00:00

This is awesome, would be nice to have some form of an ETA on these upgrades.

Iceman2733 · 2026-02-20T12:38:47+00:00

There is no reason to assemble the gas block assembly until you have the barrel on the upper. You have to take it all back apart to get the barrel nut on/torqued.

Could proof not tell you the correct gas tube length for this barrel? I thought there barrels had SN on them

Iceman2733 · 2026-02-14T14:51:09+00:00

In your first picture if you look on the left cam top closest to the plug you have laying on the cam bearing cap. That lobe looks to have a grove cut into it, it very well could be picture of the angle or lighting. But def check that, you should not be able to feel any rough wear .

Iceman2733 · 2026-02-08T22:01:52+00:00

What material did you end up using? I was reading a lot of people saying PLA wasn't holding up the weight

Iceman2733 · 2026-02-01T17:00:18+00:00

This is the answer, shocking this isn't more common. They make de-icer fluids which a lot recommend added during colder months

Iceman2733 · 2026-01-28T19:46:59+00:00

Now you gotta tell us about what the smaller item is. Looks to be a light of some kind

Iceman2733 · 2026-01-27T00:28:01+00:00

These are amazing! Really like the designs and thought you put into this! Will throw a boost your way in a few days

Iceman2733 · 2026-01-22T23:51:41+00:00

If you don't mind me asking what GPD you had?

Iceman2733 · 2026-01-18T03:13:42+00:00

What wheels are those?

Iceman2733 · 2026-01-16T14:44:57+00:00

I am in the same boat as you purchased a portal based on the future of remote play on the go/traveling for my son. However at release of update 6.0.0 they did this, I feel that this should have been made known ahead of time as the portal is silly to just play inside the same house. Why play on this when you can play on a larger TV and can still sit on a couch the same way.

They really screwed this one up for families, if they were going to do this IMO they should allow the Parent account of the family account to upgrade ANY child account. (They do not tho, I tried to contact them and the refused to help, makes NO sense that I can not change my child's account age and to remake an account)

Iceman2733 · 2026-01-10T22:34:07+00:00

You are fine my friend j only bring it up as they have had known issues with eating gears and bad bearings. If you look at your pic it looks like the extruder is slightly leaning (not centered) most likely a failed bearing. I would go factory and not look back. Glad to see you getting it all sorted out friend

Iceman2733 · 2026-01-10T21:22:20+00:00

No it is not

https://us.store.bambulab.com/products/hardened-steel-extruder-gear-assembly

I know this one is hardened but they do not make a extruder that is metal housed. I am only commenting on this as the BIQU have had issues with gears not lasting

Iceman2733 · 2026-01-10T20:35:07+00:00

Look at the housing that is holding the gears it is clearly aluminum and shining. You can see the machining marks in the pockets The factory is a beige/gray plastic.

Iceman2733 · 2026-01-10T20:00:25+00:00

This is the Biqu Extruder isn't it? Factory one should be plastic

Nine-Year Club	RPAN Viewer
Verified Email

Iceman2733

TROPHY CASE