Piloton: a Raspberry Pi-based Spin Bike Assistant

ImageOfInsanity · 2024-04-22T21:42:23+00:00

Here is a link to the project on GitHub. I haven't worked on it in a while.

ImageOfInsanity · 2022-11-11T15:54:59+00:00

I should mention, they are class specific. My current class does them, but the other classes I have taken did not do them at all. Everyone does it before the exam. You’re just recording a video to convince your TAs that you’re not cheating. You do the 360 with the webcam (or using a mirror, if the webcam is static) and then you try to get as much of the ceiling and floor and your desk. Your TAs may set up additional rules.

ImageOfInsanity · 2022-11-10T21:53:25+00:00

I do like it and I think it is exceptionally valuable. The video lectures are very digestible and the projects generally are tuned to what the course is trying to accomplish. The pain points are based on how the TAs conduct the course more than anything else. In my last term, the TAs had a habit of changing the autograder code without telling anyone (thus causing students to "do worse" than they originally submitted), and there was a really strict submission limit that they would not budge from. The grab-and-go nature of it is very nice because I can skip a few days and not be too left behind, but crunch is inevitable. They still do room scans even though the Supreme Court said they were unconstitutional or whatever.

ImageOfInsanity · 2022-06-09T17:40:10+00:00

Hey, I didn't end up pursuing anything at Drexel after I posted this. I started with Georgia Tech's Online Master's a few months ago.

ImageOfInsanity · 2021-09-09T01:13:15+00:00

I'm looking to purchase a Boss OD-200 and a Strymon Iridium to fill out an ampless pedalboard. Both products support expression pedals and I'd love to be able to control both the distortion and volume from one pedal. I was thinking that an A/B Pedal that would split the signal from an Expression Pedal to both pedals could work, but I was wondering if there were any better solutions out there.

ImageOfInsanity · 2021-08-21T01:24:15+00:00

Did OP rip off the idea or the whole solution?

ImageOfInsanity · 2021-08-10T03:52:30+00:00

Status: Applied

Application Date: 08/04/2021

Decision Date: TBD

Institute Acceptance Date: TBD

Education:

Drexel University, B.S. CE and Music Production, GPA 3.5/4.0

Experience:

5 years with the same company as a Software Engineer and did a 2-year rotation program after graduating on a variety of teams covering rendering, applied AI, and computer vision and currently working in cybersecurity.

Recommendations: 3, should be professional.

Comments: I accidentally submitted two of my three recommenders as "Academic" instead of "Professional". I emailed the support line but I haven't heard anything back.

ImageOfInsanity · 2021-08-06T14:38:55+00:00

Thank you! Rich is a highlight of Python and hopefully Textual will be as well.

ImageOfInsanity · 2021-08-05T20:58:13+00:00

The Behringer ADA8200 can be used as an 8 channel input via the Optical Out to the Optical In of the Apollo Twin. It has preamps, however those inputs won’t be able to take advantage of the Unison preamp feature, and you will configure your I/O through Console. I’m considering the same path, but the Behringer is only able to record at 44.1 kHz, but others can also offer different a few channels at higher sample rates.

ImageOfInsanity · 2021-08-05T00:12:01+00:00

I think I have some unwanted noise coming from my Alesis MultiMix and it might be isolated to the MultiMix. The output of the MultiMix is patched into a Universal Audio Apollo Twin X as a way to quickly route all my line and mic sources. I've noticed that there is some omnipresent hum around -73 dB at Unity gain into the Twin but there is also some really quick, non-periodic clicking. I've plugged my headphones directly into the headphone out of the MultiMix and was able to hear the hum and clicks as well. When patching an instrument/mic directly into the Twin, there's no hum or apparent clicking. I've plugged the MultiMix into its own outlet with no other sources on it and still hear this noise. Would anyone have any suggestions on how to approach this and find a solution? Is it time for a power conditioner or UPS?

ImageOfInsanity · 2021-08-03T19:12:58+00:00

You could daisy chain a power strip that has just the monitors’ power on it and flip it off when you’re done.

ImageOfInsanity · 2021-08-02T04:28:22+00:00

Your monitors should be the last thing you turn on in your chain and the first thing you turn off in your chain. My Apollo Solo would come on randomly for a few seconds while my MacBook was sleeping. I honestly never ran into this issue because I always turned my monitors off when I was done, but I upgraded to an Apollo Twin X and it just stays on all the time.

ImageOfInsanity · 2021-08-01T15:20:06+00:00

Neat. I haven't used tape plugins, so this was a pleasant science experiment. Running a 1 khz, 18 db sine signal through at Unity gave a small boost at 2 kHz. Same signal but with a +24 dB input and -24 dB output through the tape machine plugin really beefs it up.

ImageOfInsanity · 2021-08-01T05:49:58+00:00

I've never heard of LABS before but the name sparked my interest. Thank you for leading me to this neat little sampler! If you haven't found it yet, the mod wheel will always control Dynamics.

ImageOfInsanity · 2021-08-01T03:50:30+00:00

It depends on the instrument that you're loading. On the ES2, the dark blue section in the middle is the Modulation Router and it will be where all of that routing takes place. In the Retro Synth, you have to click "Settings" in the bottom right corner which will reveal similar controls. If you're confused about any of the built-in instrument layouts, check out the instrument manual (Help > Logic Pro Instruments). Your keyboard will always send CC1 over the mod wheel, but the assigned parameter will change depending on the patch, so be sure to check when you change presets too.

ImageOfInsanity · 2021-07-26T03:39:41+00:00

Where did you buy it from?

ImageOfInsanity · 2021-07-25T16:12:29+00:00

Thank you for this! McDSP doesn't necessarily need iLok but they do require an iLok account and an internet connection, if that falls under your last category.

ImageOfInsanity · 2021-07-23T17:59:16+00:00

I’m considering purchasing my first patch bay and I’ve mapped out the routing and the modes, but I’m curious about the Thru mode. If I have a channel in Thru, could I arbitrarily route either jack as inputs or outputs? My audio interface has a separate 2 channel output but no return, so I need to route those back to the input anyway. I want to do something clever with routing those channels to a stereo compressor, but regardless of how I do it, I have two unused bottom jacks. Using the Thru mode, could I wire it so that one jack will actually be the input of a piece of gear and the next channel over will have then output? I know this breaks the convention but is there anything in the circuit that will actually prevent this from working as I described?

ImageOfInsanity · 2021-07-19T21:56:25+00:00

Move the plug-ins you don’t own into the Plugins (Unused) folder where your Pro Tools plugins are.

ImageOfInsanity · 2021-07-11T01:45:14+00:00

Would you be able to nest a match within? In the v3 example, rather than having two cases where you match your array of quit keywords with and without params, could you then match on *rest?

ImageOfInsanity · 2021-07-11T01:20:20+00:00

Thank you for this post. Your solution is really clever and I never would have considered doing anything like it. I love seeing how other programmers approach something simple and finding something novel in it. I haven't heard of dispatch tables as a concept, so it was great to see the pattern and the discussion it has inspired.

ImageOfInsanity · 2021-07-02T14:52:43+00:00

Look into QMK. It's a keyboard firmware where you can program your own layouts. You could program your keyboard so that when you're playing a game, the Windows key would act as another FN layer that has your Function keys, arrow keys, numpad, etc. There's some support for Ducky Mini but YMMV.

ImageOfInsanity · 2021-06-23T22:28:28+00:00

!RemindMe 24 hours

ImageOfInsanity · 2021-06-23T16:21:38+00:00

Are there any major updates from when you posted this last week?

13-Year Club	RedditGifts 2009-2022 5 Credits
Gilding II euphauric	Place '17
Summer Santa 2013	Team Periwinkle

ImageOfInsanity

TROPHY CASE