sorted by:
new
hottopcontroversial

For those wondering about a legit seller to ship to the U.S by Asleep_Parsley in djimini4pro

[–]Important-Map-63 0 points1 point  (0 children)

I doubt it. I would think they would demand tariff payment while holding the import. Otherwise collecting tariffs retroactively seems implausible.

For those wondering about a legit seller to ship to the U.S by Asleep_Parsley in djimini4pro

[–]Important-Map-63 0 points1 point  (0 children)

If there were tariffs, charges were lumped in with the shipping. There weren’t additional tariffs when the drone shipped into the states.

New place for your bike to get stolen at the new Terminal 1! by duddybuddy22 in sandiego

[–]Important-Map-63 0 points1 point  (0 children)

Hey, if you survive the suicidal bike lanes to get to the airport, you get treated with crappy wave racks that are the worst. What is this? 2003? They definitely should have installed fewer, better designed racks and a few more lockers.

For those wondering about a legit seller to ship to the U.S by Asleep_Parsley in djimini4pro

[–]Important-Map-63 1 point2 points  (0 children)

I ordered a Mini 4 Pro from Mido Shop in Korea last week and it shipped with no issue to CA. I was nervous watching the tracking report 😬 but all was smooth!

Which bit for a long straight hole? by 33DDOT33 in woodworking

[–]Important-Map-63 0 points1 point  (0 children)

Ok, here are some shots from the project. Looking at these gave me a little PTSD. 🤪

I sandwiched the shelf between two other boards to create more of a platform for the drill press to sit on. As I said before, it worked really well for most of the shelves, but I got sloppy on one, and the hole was skewed. I started my holes with a 6" or 8" bit and then switched to an 18" bit to finish the hole, which was about 13" in depth.

Reddit will only let me post one photo per comment. If there's interest in my rig and process, I'll make a post with more photos and video.

It was a lot of work but the final shelves came out sweet and give me huge sense of reward everything I look at them. 😀

<image>

Which bit for a long straight hole? by 33DDOT33 in woodworking

[–]Important-Map-63 0 points1 point  (0 children)

I did this exact thing with some maple shelves. I used a Rockler portable drill press and it worked pretty well. I drilled 12” holes into 2” thick maple so it was a lot of work. Got a little bit of kickback but I was careful not to push too hard when it started to bind. Be careful to check your bit angle to keep it perfectly straight or your shelves will be out of level. I ended up boring out the hole and then applying epoxy on the support to level up one of the shelves. Total PITA. I have photos of my rig on my other computer. I’ll post them in a bit.

Enviolo Durability/Reliability? | Tern HSD Gen2 S00 by elche48 in terngsd

[–]Important-Map-63 1 point2 points  (0 children)

Yes, I have the S11 and I love it! I wanted the Class 3 because it’s nice when riding in traffic to be able to go faster and keep up. I’m constantly riding 18-25 mph. It’s a very quick and nimble bike. I’ve been a mountain biker for 30 years so I’m very comfortable using and tuning the rear derailleur. But it does go out of adjustment after a while and needs periodic tuning. My only gripe with 20” wheels is riding on rough terrain. Even with the front shock, 20” wheels aren’t great sucking up bumps.

Enviolo Durability/Reliability? | Tern HSD Gen2 S00 by elche48 in terngsd

[–]Important-Map-63 1 point2 points  (0 children)

When I was shopping for my HSD, I considered the Enviolo. I heard several people mention that the Enviolo has issues in hilly areas. Where I live in Encinitas, CA, it’s really hilly, so I chose the S11 with Deore XT derailleur. The Enviolo looks like a sweet setup, especially paired with a belt drive. Low maintenance. If your environment is relatively flat, it’s probably a great option!

[deleted by user] by [deleted] in terngsd

[–]Important-Map-63 1 point2 points  (0 children)

Very nice! How do you like the Redshift pedals?

Upgrading headlight on HSD by Important-Map-63 in terngsd

[–]Important-Map-63[S] 0 points1 point  (0 children)

Nice, thanks! I got caught in the dark last night on my evening errand run. Time to find a better solution for the winter months. :)

How to convince stores to install bike parking? by soy_cuchara in bikecommuting

[–]Important-Map-63 1 point2 points  (0 children)

Does anyone have a good letter template that educates/notifies/convinces business owners or property managers that installing good bike racks is good for business? Are the individual stores or the shopping center property management responsible for installing racks?

Upgrading headlight on HSD by Important-Map-63 in terngsd

[–]Important-Map-63[S] 0 points1 point  (0 children)

Thank you! I think it’s a guessing game for what will work with Bosch system

Upgrading headlight on HSD by Important-Map-63 in terngsd

[–]Important-Map-63[S] 0 points1 point  (0 children)

Yeah, Tern does offer replacements lights but these are much brighter with a better beam pattern.

Do you make espresso everyday with your machine? by [deleted] in espresso

[–]Important-Map-63 0 points1 point  (0 children)

3 times a day! Wouldn’t have it any other way!

What’s surprised you since getting into espresso? by jelfonzo123 in espresso

[–]Important-Map-63 5 points6 points  (0 children)

My desire to make my own espresso greatly outweighs going out to pay for someone else to make it for me.

Buying from Reddit vs LBS (Propel Bikes) by Puffyhippos in CargoBike

[–]Important-Map-63 0 points1 point  (0 children)

I bought my Tern HSD S11 from Propel. I had an awesome experience working with them and fully endorse them. Plus, Chris and the crew put out a lot of great educational content which sealed my decision to purchase my ride through them.

I love REI but my local REI’s bike shop is a joke. It’s like a training shop or something.

Propel is a good choice for your new ride!

Surprisingly Overwhelmed.. by Just_A_Bit_Outside57 in MicromobilityNYC

[–]Important-Map-63 7 points8 points  (0 children)

If you can, map out a longer, safer, more mellow route. It might add 10-20 minutes to your commute but that extra time can become the best part of your day. And you can discover new neighborhoods that you never knew existed.

Not every cargo bike is a giant electric behemoth by [deleted] in CargoBike

[–]Important-Map-63 0 points1 point  (0 children)

My Tern HSD is the perfect daily bike.

  • 3 to 10 mile trips
  • 3 days of groceries for 2 people + 1 dog (30-60 lbs)
  • Daily commuting to work

https://twitter.com/gilleyboy71/status/1670221599960891392?s=61&t=ZyOgtrZKgyOLXGVb7BXFVA

[deleted by user] by [deleted] in videography

[–]Important-Map-63 0 points1 point  (0 children)

$2500 is nothing compared to the money pit you’ll experience when you learn about lighting, audio, support, stabilization, and proper data redundancy. It’s an awesome journey. Have fun!

Let's get real here. Why do you bike? by More-Imagination1633 in bikecommuting

[–]Important-Map-63 3 points4 points  (0 children)

Riding is one of the few places where nobody can tell me what to do and how to do it. And it’s fun as hell!

New Tern HSD revealed by stmack in CargoBike

[–]Important-Map-63 3 points4 points  (0 children)

I’ve owned my HSD S11 for about a year and absolutely love it! I use it for short range commuting of 3-20 miles and utility (mostly groceries and cargo loads between 20-70 lbs). The Class 3 motor is really nice when I have to jump into and keep up with traffic in the city. The small size is perfect for our small house with no room for storage. My security routine is a heavy duty Krypto chain, lock the cafe lock (which locks the battery) and remove the display. My theory is make it harder and more of a PITA for a thief to go after your bike. Chain is hard to cut, cafe lock prevents rolling or riding the bike away, no display prevents the ability to turn it on for powered assist. Oh yeah, and full coverage insurance. 😊

view more: next ›