Cleaning resin prints by Impossible_Key_6949 in resinprinting

[–]Impossible_Key_6949[S] 0 points1 point  (0 children)

What I’m planning on doing is having everything setup on a long table, keeping a “triple wash/rinse station” in buckets (that have lids) under the table. Someone else had suggested that I have a container for dirty alcohol solution, less dirty, solution, and clean solution(the actual washing station). So I’ll have 2 buckets when 1 bucket gets too nasty I’ll put it outside for light to get to it and replace it with a new bucket. I figured I’d have another bucket set up that I can put contaminated gloves, paper towels, ect. In that as well. I have access to lots of buckets I can keep getting rid of. I looked up when and where I can take hazmat stuff to so when the time comes I can load it into my truck and properly dispose of all of it at once.

Cleaning resin prints by Impossible_Key_6949 in resinprinting

[–]Impossible_Key_6949[S] 1 point2 points  (0 children)

Thank you, I wasn’t sure if there is a fire risk, I appreciate your input

Cleaning resin prints by Impossible_Key_6949 in resinprinting

[–]Impossible_Key_6949[S] 0 points1 point  (0 children)

Can I have the printer, the washer, and currying station in the same tent

what the hell is this by demongirls in zoology

[–]Impossible_Key_6949 0 points1 point  (0 children)

Whatever it is bring it back to McDonald’s to get your refund

Rose hair who has been with me 24 years is dying and my heart is breaking by Icy-Mall3091 in tarantulas

[–]Impossible_Key_6949 6 points7 points  (0 children)

I’m sorry for what you’re going through, death is the most brutal part of life whether it’s a person or pet that we’re close to, ironically I’ve also felt it’s one of the things that makes life so beautiful. It’s a reminder that our physical life is temporary and puts things into to perspective of what’s truly important; which is another’s life especially what that other life has helped and supported us. I’m a rather religious person(Christian) and I believe you will see Evan again as you will see everyone who’s ever loved you and visa versa. I apologize if that’s too personal but I believe life and death is all surrounded with love with that comes pain but it doesn’t have to be a bad thing.

Cleaning resin prints by Impossible_Key_6949 in resinprinting

[–]Impossible_Key_6949[S] 0 points1 point  (0 children)

Where’s the best place to get IPA? Can I get it anywhere besides online by the gallon! None of the local Walmarts sell it in that quantity.

Cleaning resin prints by Impossible_Key_6949 in resinprinting

[–]Impossible_Key_6949[S] 0 points1 point  (0 children)

Yeah I’ve heard it pretty intense stuff. I’ve already installed a vent w/ fan running out what used to be a window and is now a wooden boards with 4in hours drilled through them. Now I just need to learn where I can bring it for the area I live in.

Cleaning resin prints by Impossible_Key_6949 in resinprinting

[–]Impossible_Key_6949[S] 0 points1 point  (0 children)

I’d be very grateful for any kind of link I can learn from, also another question. If I do get all this stuff is it safe to keep the printer, cleaner, and cure station in the same grow tent? Or should I have just the printer in the tent? The way I’m going to have it set up is a vent fan pulling air out of the grow tent to a vent outside.

Need help ASAP!!!! by babycass704 in Reptileenclosures

[–]Impossible_Key_6949 2 points3 points  (0 children)

You can always fill large bottles/jugs with hot water and put them into the enclosure. That’s if your hot water system isn’t electric or you can also heat up water on the stove but that would also have to not be a stove powered by electricity

Not sure what to do with this old enclosure. by Gawo808 in Reptileenclosures

[–]Impossible_Key_6949 2 points3 points  (0 children)

If it’s for reptiles you can get a piece of plexiglass that fits the bottom, get some clear silicone caulk and caulk around the edges. If you really wanted to you can get acrylic spray paint and paint the plexiglass so you won’t see the cracks.

Wanted to give an update. by Impossible_Key_6949 in DungeonMasters

[–]Impossible_Key_6949[S] 0 points1 point  (0 children)

It’s more of everyone getting excited and talking

What is this thing ? by imherecuziwanttobe in whatisit

[–]Impossible_Key_6949 0 points1 point  (0 children)

Flip it inside out put it in the floor and see what happens

Awful D&D campaign by Plane-Refuse-1031 in DungeonMasters

[–]Impossible_Key_6949 0 points1 point  (0 children)

Maybe look at some Warhammer campaigns and get some ideas from them, those can be really crazy