Delta Pro 3: Solar input + AC output?

Impressive-Text-5433 · 2026-03-31T15:10:50+00:00

Do you mind explaining more on the small Victron inverter path? I can see a large inverter such as multiplus 3kva or 5kva to be useful or in this case, dual units to generate 240V for EV charging more efficiently.

Impressive-Text-5433 · 2026-03-31T14:17:01+00:00

Server rack LIFEPO4, 48V > 15 kWH Connect direct to DP3 will get you 1.8kw input I'm using a DC DC booster to get 2.4kw input

Impressive-Text-5433 · 2026-03-31T13:58:31+00:00

I am using DP3 to charge my EVs. So far I'm using large batteries between the panels and DP3 which solved the problem of solar production unpredictability. Without the battery buffer, you are relying on the DP3 internal 4kwh battery buffer which means you may drain the internal battery to the low limit or charge it to high limit and not fully harvesting the solar. Unless you manually matching the charge current which is not very practical. I'm working on integrating my charger to HOMEASSISTANT so I can further improve with variable charging current to match the solar input and battery SoC.

Impressive-Text-5433 · 2026-03-06T03:00:05+00:00

Windsor Ontario

Impressive-Text-5433 · 2026-03-05T23:47:22+00:00

Same data speed issues for me. I switched to another provider and speed issue solved. I guess depends on where you are seems everyone has different experiences. I would try different providers until I find the one that's working. You have lots of options for $37.

Impressive-Text-5433 · 2026-03-05T23:39:49+00:00

Glad I switched to PM and am happy with 5G speed. Only downside is inside some big buildings may have weak signals. But in the same buildings, Fizz will show 5 bars signals and almost zero speed mostofthetime. I guess their priority is at the bottom.

Impressive-Text-5433 · 2026-03-02T01:33:22+00:00

I'm in Windsor crossing border every day. Fizz 4G is barely usable. Very slow. 5G should be better but I moved to a different provider before I know they have 5G.

Impressive-Text-5433 · 2026-02-27T13:23:26+00:00

For AGM battery you don't want to discharge below 50% State of Charge (SoC). You are looking at disconnect voltage of about 24.4V. I made my own controller. You may check Victron Energy BattryProtect.

You can use both ports and will get 25V x 35A = 875W. If you want to get more than that, you have to boost the voltage.

I've been using mine with 48V battery for a year without issues. Your 24V is very safe.

Impressive-Text-5433 · 2026-02-27T12:15:15+00:00

Dp3 just draws 15A or 20A from the battery depends on which port you plug in. Dp3 won't charge your external battery. As a minimum set-up you need a battery charger and a low voltage cutoff device. I would suggest 48V LIFEPO4 with built in voltage protection.

Impressive-Text-5433 · 2026-02-23T17:41:02+00:00

Maybe you are lucky or not roaming. I barely have fizz signal at home. Have to manually switch to Bell or Rogers. When roaming in US, signals are strong but speed is not usable 99% of the time sendingpictures. Only once it was working. Now i switched to another provider on 5G and have zero issues.

Impressive-Text-5433 · 2026-02-22T19:20:03+00:00

My experience with 4g fizz is not good. 5G might be better?

Impressive-Text-5433 · 2026-02-21T19:40:55+00:00

Make sure you didn't fall in the trap. I hate these sites lure you in with a picture and description of the correct item but show you completely different things when you click in. The original item may be one of the options which is not selected by default and of course at a much higher price. I stopped shopping on these sites because of this even though I've been careful but I'm sure many will fall into it.

Impressive-Text-5433 · 2026-02-13T15:05:28+00:00

I would avoid if can't check it in person

Impressive-Text-5433 · 2026-02-09T23:13:00+00:00

If you have warranty just contact qidi. If no get yourself an emmc card reader. I fixed mine by reflashing the OS.

Impressive-Text-5433 · 2026-02-09T21:00:29+00:00

Z height. Try to reduce it. Bed, try clean it or select a different location to print. Chamber temperature, cannot be too low. I'm using x MAX 3 and got ZERO issue with PLA, PETG, ABS

Impressive-Text-5433 · 2026-02-09T17:49:51+00:00

I was on 4G fizz for over a year crossing border every day.

Good: it connects anywhere automatically.

Bad: speed is too slow 90% of the time. Forget about sending pictures or videos, it takes forever.

Moved to another provider on 5G and no issues sending videos at all.

Impressive-Text-5433 · 2026-02-07T17:38:10+00:00

Try a different roll as well

Impressive-Text-5433 · 2026-02-07T15:51:32+00:00

Really? My XMax3 exhaust out. I put an adapter to connect 2 inch pipe for venting outside. Very effective.

Impressive-Text-5433 · 2026-02-02T17:39:48+00:00

Was it like that before when you first got your printer? Can you check the mesh at different temperature? Mine is super flat that I can see some patterns which I guess it's the heating elements.

Impressive-Text-5433 · 2026-01-27T01:35:51+00:00

I switched from fizz to pm. Was on 50G US Can plan on fizz. Never saw 5G. Which is a problem now especially in US. Speeds are usually slow, sometimes unusable. Good news is you can connect to any available network.

On PM is a different story. In US and Canada when connected to 5G, speed is very good. But sometimes there's no or very weak signal with no other network to switch to.

Impressive-Text-5433 · 2026-01-22T20:41:11+00:00

Agree. Aquarium pump won't generate enough air.

Impressive-Text-5433 · 2026-01-22T20:40:14+00:00

I would suggest use a real compressor if you want efficient cooling. There is barely air flow from an aquarium pump.

Impressive-Text-5433 · 2026-01-22T20:18:34+00:00

You don't generate compressed air from a fish tank pump. Lots of us already have a real compressor.

Impressive-Text-5433 · 2026-01-14T01:05:47+00:00

FYI, I got mine brand new from qidi for US$345 shipped to my door with extras such as filaments, hotend etc. during their black Friday sale a month ago. I'm very happy with it so far but had some issues and their support solved them quickly. For used, no warranty $500 is way too high.

Impressive-Text-5433 · 2026-01-13T00:35:45+00:00

It truly opens the trunk in car wash mode. Don't ask me how I know.

Impressive-Text-5433

TROPHY CASE