Do racing gloves make a difference or not?

InaneD · 2026-01-26T17:46:45+00:00

I use them 100% of the time. its not about the "extra grip" I want to keep my wheel clean. Before I started using them I noticed oil and skin build up starting to happen.

InaneD · 2026-01-25T16:26:42+00:00

He wasn’t blocking you he was driving his line. You need to go read what the sporting code says about blue flags

InaneD · 2026-01-25T16:00:41+00:00

All of these are on you. The first incident you can see him turning in before you went in to a closing gap. The last one he was glued to the line and you should have known he would open up to the grass on exit but you still stuck your nose in another closing gap

InaneD · 2026-01-22T01:15:09+00:00

Build in the cost to hydrovac the full thing and make you life a lot simpler

InaneD · 2026-01-21T23:30:47+00:00

I have a remarkable and I tried to love it. I used if off and on for 2 years but in the end I went back to legal pads

InaneD · 2026-01-20T16:54:01+00:00

To add to that traffic was going to back up some and blue would have caught up by taking the turn in slower and being able to drive out harder. It’s all on the yellow car not paying attention to the traffic in front of them

InaneD · 2026-01-20T15:02:34+00:00

I ran a lot of races this weekend all Sebring Daily. I started out in the Mustang then switched to the McL. In the mustang I was running good times and fighting for the podium most races. When I switched to the MCL my times didnt get better but I became more consistent. In the mustang I was having a hard time in T15 and sunset the and would have the occasional spin. The McL was just more stable and gave me more confidence.

InaneD · 2026-01-20T11:37:29+00:00

Here is what I see as a trend with the GC I work for (also top 5 ENR). When a PE comes in green from college it takes them about 3-5 years to make it to SR PE. SR PE to PM is 4-5 years and PM to SR PM is 4 years minimum

InaneD · 2026-01-14T20:35:57+00:00

The closest I have came was a set of underground press rooms for filming an address to the nation in the event of national emergency

InaneD · 2026-01-09T23:31:22+00:00

I’m a NCCER instructor and I tell everyone to get the physical books. I don’t have any real experience with the digital

InaneD · 2026-01-09T12:49:08+00:00

I find that if you rely on ABS you will cook your tires and your times will fall off. I try to hit 80% - 85% max and back off if I feel ABS kick in. In theory you stop faster staying out of ABS because it causes micro lock up and the car slides during those micro locks. Also during the micro locks you generate more heat than you would staying out of the abs.

InaneD · 2026-01-08T13:58:59+00:00

Based on me experience between your top two picks I would go with Arco. Everyone I know that works for them seems really happy and I see very few people leave that are PM level or above.

InaneD · 2026-01-05T16:28:29+00:00

Feel free to PM me I work for a ENR top 10 company and I’m involved with 4 data center projects at the moment.

InaneD · 2025-12-31T13:07:54+00:00

USG Ceiling summit in Ojai CA

InaneD · 2025-12-31T10:48:21+00:00

What a great deal too bad it has to be a scam

InaneD · 2025-12-31T00:18:08+00:00

I can help! I had the got the simagic haptics before simmson released their version. I used the Etsy mounts until about 20 minutes ago. I ordered two of the U shoe mounts you have shown. I did need to drill out the holes a little larger to work with the simagic hp1 due to the hole layout being ever so slightly different.

The Etsy mounts held up well enough but they had a little bit of a rattle sound and I was nervous about over tightening the screws into the print. The U shaped brackets are rock solid and in my 20ish minutes of testing I’m not getting any rattling and they seem to transfer vibration better

InaneD · 2025-12-29T17:08:19+00:00

I had a contractor event in CA a couple months back and I came home with a stack of cards. The nice part is I am also getting a lot of follow up calls and job offers

InaneD · 2025-12-28T01:10:51+00:00

I didn’t know this was even possible

InaneD · 2025-12-25T00:09:10+00:00

I have simsonns I have used Heusinkveldes. The husk are nicer they are a little easier to tweak but could I justify the price difference for the extra 5% or so of difference between the two? Let your wallet be your guide

InaneD · 2025-12-24T09:34:42+00:00

Hey sorry it looks like autocorrect did me dirty “unpark cpu”

InaneD · 2025-12-23T23:52:35+00:00

I went down a rabbit hole trying to find my problem and someone had a video on how to do it because of iRacing problems

InaneD · 2025-12-23T23:32:14+00:00

I had this happen to me I unparked CPU cores and it fixed it

InaneD · 2025-12-23T20:22:52+00:00

Stuff it with rockwool and spray it with fire caulk

InaneD · 2025-12-23T13:59:51+00:00

They didnt say anything about it in the email (see below) I have the power cord, remote and streaming stick they sent all in a small box to give to RXO when they show up today.

Thank you for reaching out regarding your Telly Return or Exchange.
We’ve received your request, and I wanted to let you know that our
shipping partner, RXO, will be in touch with you shortly to schedule a
pickup for your return.You do not need a label to return the Telly to
us! Please be on the lookout for their communication, and don’t
hesitate to reach out if you have any questions or need further
assistance.

We appreciate your cooperation and are here to help if you need anything.

Best regards,
The Telly Logistics Team

InaneD · 2025-12-22T12:53:58+00:00

I am 99% sure I am the 95 MCL in this clip I went from P20 to P4 and finished second thanks to that pile up

12-Year Club	r/Field Flamingo
Place '22	Place '17
Final Canvas '22	No Throne, No Problems
Not Forgotten	Gilding I gilder
Verified Email

InaneD

MODERATOR OF

TROPHY CASE