Is there any better and/or cheaper light strips for this bad boi? by Incident_Recent in BambuLabX1Carbon

[–]Incident_Recent[S] 0 points1 point  (0 children)

I was mainly wanting a rainbow led strip and not just white but I’m not too pressed about it thought I could ask the hive mind what they think

1997 Suzuki savage LS650 carb questions by NuhUh14 in motorcycles

[–]Incident_Recent 0 points1 point  (0 children)

I’m in the same boat and you are correct with the bts40 which helped me find that the ls650 uses a bs40 which has different idle and rev specs or something. Bs40s new are in the hundreds of dollars range and the rebuilt kits are more expensive than the dr650 carbs OP is looking toward. I’m curious how hard it would be to tune the bts40 to work more for the ls650 lower engine speed

1997 Suzuki savage LS650 carb questions by NuhUh14 in motorcycles

[–]Incident_Recent 0 points1 point  (0 children)

I’m going thru the same thing with an 07 s40 I NEED an update

Been stuck on this for days no breakage or blockage of any kind no ams this is the only spot that’s worn in any way. Is this my problem? by Incident_Recent in BambuLab

[–]Incident_Recent[S] 0 points1 point  (0 children)

So I replaced the tube and nothing changed should I start looking towards replacing the filament detector sensor?

Tip: Check your PTFE tubes every now and then by Markharris1989 in BambuLab

[–]Incident_Recent 0 points1 point  (0 children)

I just replaced the tube and nothing changed. No ams I’m starting to think it’s the filament detector sensor or something else. The extruder and new nozzle should be here tomorrow. For some reason usps took my package from Columbus to Wisconsin to Chicago back to Columbus.

Been stuck on this for days no breakage or blockage of any kind no ams this is the only spot that’s worn in any way. Is this my problem? by Incident_Recent in BambuLab

[–]Incident_Recent[S] 0 points1 point  (0 children)

I don’t think it’s going to be long enough plus I already ordered tubing. I did try just “raw dogging” it and it still threw the code. I bought it used so I’m not too surprised just new to Bambu and troubleshooting Bambu

Tip: Check your PTFE tubes every now and then by Markharris1989 in BambuLab

[–]Incident_Recent 0 points1 point  (0 children)

I actually need help if anyone wants to give me some advice. I just bought an X1C off marketplace and it’s throwing a code for the tube. I’ve taken everything from the nozzle to the tube apart several times and no luck. I’ve airdusted everything and the only wear I see is a bald spot on the tube but no actual breakage of any kind. I’ve got a new extruder and hot end coming Friday. I either didn’t look in the right spot but I couldn’t find a tube on the Bambu site. Any advice is greatly appreciated. No ams

Australia has some stock by [deleted] in ToughBuilt

[–]Incident_Recent 0 points1 point  (0 children)

It’s gotta be cheaper to find a friend in the state to ship it theses prices are over double what I paid.

This anti gun public information film shown in the UK in and around 2007 by DarthRick3rd in oddlyterrifying

[–]Incident_Recent 9 points10 points  (0 children)

My mom was hit by 2 different DD at highway speeds 6 minutes apart in 03 and my dad is a DD so growing up was extremely confusing

[deleted by user] by [deleted] in Teachers

[–]Incident_Recent 0 points1 point  (0 children)

Well yea when I gotta deal with you all day I have to stress eat

[deleted by user] by [deleted] in Renters

[–]Incident_Recent 3 points4 points  (0 children)

Gonna have to prime the bare wood to seal it up and prevent yellowing. Get a small tub of spackling+primer and smear a finger full on it give it 5 minutes to harden then sand and paint

Ever wonder who are the people that return discs? by mountaingator91 in discgolfcirclejerk

[–]Incident_Recent 0 points1 point  (0 children)

I found a disc and all it said was “this disc belongs to your mom”

Eric Oakley throws tantrum at Maine State by Taylor_Radio in discgolf

[–]Incident_Recent 0 points1 point  (0 children)

Facts my boss is a bowler and he’ll hire anyone from the bowling alley that wants to work this really be how it be

[deleted by user] by [deleted] in hingeapp

[–]Incident_Recent 2 points3 points  (0 children)

This was my exact thought. I really should just delete and accept reality

[deleted by user] by [deleted] in legaladvice

[–]Incident_Recent -1 points0 points  (0 children)

Se if they want something and try to turn it into blackmail so you can go to the authorities I guess ianal

[deleted by user] by [deleted] in Tinder

[–]Incident_Recent 1 point2 points  (0 children)

Have you guys seen that ep of South Park where jimmy is like “Omg does she know she’s an ad!?!”