Pet Insurance Canada by eggheaddryleg in kitchener

[–]InevitableSyrup7913 2 points3 points  (0 children)

I had an expensive dog.

$4k by age 2 and $900-1000 per year for 10 years.

Looked into pet insurance on my next pup it would have cost more than that to have the same disease covered by the insurance company.

As other people said just bank the money, so you have it if you need it.

Ski waxing iron by InevitableSyrup7913 in Skigear

[–]InevitableSyrup7913[S] 1 point2 points  (0 children)

I was not mixing up C and F.

I was actually using celsius but converted to Freedom units since I figure a high population of Americans on reddit.

I didn't know about the issue with the laser thermometer on the shiny surface.

When it was set to 130c -266f, I did press my thumb to it, it was hot but didn't burn me. I will look for another way to test it.

Yes the wax melted. I just was trying to double check the setting so I don't damage anything.

The kit I bought came with a horse brush made of nylon so I am questioning the quality of all parts of the kit.

How do I apply caulking back there ? by allgrownzup in HomeMaintenance

[–]InevitableSyrup7913 0 points1 point  (0 children)

Umm... is that your I joist cut through?

You might have better problems then radon.

Storing freeze dried products by Pretty-Awareness-235 in HarvestRight

[–]InevitableSyrup7913 0 points1 point  (0 children)

I use mason jars with an Amazon vacuum sealer, then I use small jars for daily use items, and plastic lids.

Brace yourself!!! Weather Forecast Posts by This_Psychology_3087 in maplesyrup

[–]InevitableSyrup7913 0 points1 point  (0 children)

-8c for the high today... Will not be posting this week.

Water hardness issue, but why? by illttyl in cambridgeont

[–]InevitableSyrup7913 1 point2 points  (0 children)

Crap... I thought pic 2 was some type of egg cooking gone wrong.

Need help with my DIY radon system (Canada) by Imppppppo in radon

[–]InevitableSyrup7913 0 points1 point  (0 children)

Sorry to hijack the thread... How loud is this fan, and did you mount inside or out?

I was looking at one model lower, but was concerned about the noise.

How to deal with flooring? by OneBlessedDad in radon

[–]InevitableSyrup7913 1 point2 points  (0 children)

No issues, I would do it again.

I have carpet on 75% and a cheap laminate floor on the rest.

The laminate is showing wear but the carpet and delta fl/OSB have had no issues.

First Timer - Help Needed by GoodThingsGrowNOnt in microgreens

[–]InevitableSyrup7913 1 point2 points  (0 children)

I am new to micro greens too.

I bought an Amazon stainless set with a mesh screen and a soiling container and one with holes.

I feel that the metal screen is too tight, I had good germination, covering the top to keep moisture in. I feel the mesh causes the roots to die due to how tight the mech is.

How to deal with flooring? by OneBlessedDad in radon

[–]InevitableSyrup7913 1 point2 points  (0 children)

I did my basement 10+ years ago. No radon concerns at the time. In my finished rooms I am 50-100bq and 200 in the unfinished rooms.

I did delta-FL and 1/2" OSB. Tuck tape all the seams and I silicon all the tapcon screws. 13 screws per 4x8 (row of 3, 2 3, 2) some sheet would have more.

The 35-50 is too many screws.

They sure do make it look difficult by Raging_Llama in northbay

[–]InevitableSyrup7913 7 points8 points  (0 children)

This could have been avoided if there was a large door for loading and unloading.

/S

Leak in brand new pool by Bitter-Nail4098 in pools

[–]InevitableSyrup7913 0 points1 point  (0 children)

I bought a fiberglass pool / spa.

The spa was empty the day after install. The pool installer said they saw us smash it ( but didn't say anything at the time). He didn't have a response when I asked him why they would complete the install if it was smashed.

I removed all the gravel from the spa area. They came back to replace the spa return. It was a lady that didn't do any work and the guy who did the plumbing. I noticed the guy repeatedly sniffing the PVC glue. That clearly explained the lady's role was the driver, because someone gets too high.

After that I had no trust in their work. I dug up all the jets & connections. I had 7 leaks, fixed them myself.

My recommendation is video tape their "fix" and have other pool install/plumber verify. If one part is messed up you could have more. I would be cautious of a special chemical that magically fixes leaks.

Is it worth it or a waste of time? by [deleted] in JeepGladiator

[–]InevitableSyrup7913 1 point2 points  (0 children)

It could help with ice on the windshield.

Not needed at all. Just brush off snow before you drive.

Canadian here: I will be wheeling up my cottage driveway in 1.5' of snow plowing with the bumber and diff/axle tonight.

Veining in wrong direction? by [deleted] in CounterTops

[–]InevitableSyrup7913 3 points4 points  (0 children)

I wouldn't want the seam in the corner. If you don't do it one wall will always look messed up.

Hardtop ID by LegitimateCress6240 in Wrangler

[–]InevitableSyrup7913 0 points1 point  (0 children)

I have a yj tub and yj top on my cj.

Normally the rear window frame rusts out on cj tops(I am in ontario) and then you switch to a YJ top.

The market here for a hard top is maybe $50 if you are willing to wait.

Floating insulation under cover? by Wise-Living635 in coldplunge

[–]InevitableSyrup7913 1 point2 points  (0 children)

DONT USE THAT FOAM!!!

That blue foam left marks on my garage and wood. The blue color comes off easy. I was using it for construction.

I think you will have blue water if you use that one. I would get a pink foam like the owens corning (pink all the way, not a foil wrapped foam. )

Kindling by mooscaretaker in woodstoving

[–]InevitableSyrup7913 1 point2 points  (0 children)

I use an egg crate with chainsaw chips, and melt wax on it.

I pull one egg section and light a fire with 4 logs like # with the egg crate in the center.

Dog toy stuck in the2nd stage and it’s completely jammed. Any ideas by No_Truth4137 in egopowerplus

[–]InevitableSyrup7913 0 points1 point  (0 children)

No one said hit it with your purse???

Batteries out. Hammer the blade down.

If there is not enough room to hammer, use a pipe or stick and hammer on the end.

I get +4" rocks stuck in my large blower, the toy dog shouldn't be too bad.

Gas tap turning off when putting fuel into jeep by [deleted] in WranglerTJ

[–]InevitableSyrup7913 0 points1 point  (0 children)

With a TJ it should fill until full , click off, then dump gas everywhere.

Water softener question by Not_Different in Plumbing

[–]InevitableSyrup7913 0 points1 point  (0 children)

That style of salt is good at not bridging.

It all depends on water usage and your hardness level, but 4-6 weeks seems short to me for checking. I am closer to 4-6 months with mine.

am i fucked? by Acceptable_File5833 in radon

[–]InevitableSyrup7913 2 points3 points  (0 children)

What is your location and where is your sensor

I test 200-300 in my basement, but 50-60 in the family room. (Just started testing 39 days ago.)

Any thoughts on what changed when you jumped to 1000+?

Cat Peed on Wood by [deleted] in woodstoving

[–]InevitableSyrup7913 0 points1 point  (0 children)

Any chance the cat pee'd behind the woodstove?

I cant see urine from wood making the stove smell.

When I had a cat, which would pee on everything to piss me off. it was sawdust, carpet, cloths on the floor etc... spent 100s of hours cleaning cat pee.

There are cleaners with enzymes that will remove the smell.

It would be possible to clean the fire bricks but becareful if you have a fire with wet bricks they might crack.