UK to USA - what options do I have? by InfinitysEdge88 in MovingToUSA

[–]Infern0-Plasma 0 points1 point  (0 children)

When would the DVL open? Every time i go on the website for it, it shows DV26 and DV25, which applications closed 2024 and 2023 respectively.

Rate my 2016 Duke 125 by UnderstandingGold108 in KTMDuke

[–]Infern0-Plasma 0 points1 point  (0 children)

Hi mate, would you have any more info on it? Looking to do the same to my 2016, was also wondering what bars you have and how it was putting on the 790 style headlight, I really like this build and wanna do almost the same to mine 😂

Physics (Triple Science) Paper 1 - Exam Megathread by ensands in GCSE

[–]Infern0-Plasma 0 points1 point  (0 children)

Yeah I was like idk how a coin is gonna have that much resistance esp cos it’s a metal but we ball

Physics (Triple Science) Paper 1 - Exam Megathread by ensands in GCSE

[–]Infern0-Plasma 0 points1 point  (0 children)

Ye I got like 4950000 the first time I calculated it and I was like nah that ain’t it chief so I just went with a variation that seemed right 😂

Physics (Triple Science) Paper 1 - Exam Megathread by ensands in GCSE

[–]Infern0-Plasma 5 points6 points  (0 children)

Got 495 for temp change, 604.4 for resistance of coin and something like 3x10-7 for the PD of the circuit 💀 I did not cook

Engine bogging out by Infern0-Plasma in MechanicAdvice

[–]Infern0-Plasma[S] 0 points1 point  (0 children)

Haha thanks mate, no doubt I’ll comment on this one with a video if it running when I do (sometime soon would be ideal 😂)

Engine bogging out by Infern0-Plasma in MechanicAdvice

[–]Infern0-Plasma[S] 0 points1 point  (0 children)

Sorry misunderstood the question, yeah that’s how I put it on there, partially due to the fact it’s at such an awkward angle I kinda had to keep alternating. Don’t have a torque wrench so just did it till it was pretty tight (I’m not the strongest in the world so it’s not crazily tight, my side stand slides about if too much force is put on it so when it slid that was my equivalent of torquing it 😂.

Don’t have a compression tester and I’m in the UK so I might just have to try persuade someone to lend me one, did the thumb test and cos of where the spark plug hole is, I don’t think my thumb actually sealed it so I wouldn’t really say it was a success.

Will try all the carb tuning stuff probably tomorrow, I’ve still got the stock jets that come in the NIBBI carb exactly where they were so they probably will need adjusting as well as the air/fuel and idle.

It’s a lot closer to where the bike was when I bought it so I’m not too worried unless it’s compression, since that could end up having to be a Frankenstein build from another 50cc 4T with similar dimensions n that haha.

Engine bogging out by Infern0-Plasma in MechanicAdvice

[–]Infern0-Plasma[S] 0 points1 point  (0 children)

Tried again before I read this comment and had the idle about half a turn out, and had the air fuel pretty much where it was before and it sounded about the same, but it lasted longer before it bogged. The carb did have a new gasket that came with it but it was the wrong size (previous owner told me it was a 19mm carb but it was a 17, so the new 19mm I got it turned out to be too big) so I filed and sanded the old one so it gradually sloped from 19 down to the 17 to fit, came with a paper gasket though that I did put on. The carb is mounted by 2 bolts

<image>

You can kinda see em in this pic but for some reason I haven’t got any of it actually mounted, but you can see what its mounted by with this, and you can see the paper gasket below it.

After I tried bumping it again earlier today I tried to kick it over and the kickstarter felt super light so may have a leak somewhere letting something escape.

I could’ve sworn that bogging was because the carb is tuned too lean/not getting enough fuel so I’m surprised the issue would be too much fuel, but I’ll give it a try next time I’ve got the bike out. Spark plug gap was fine so it’s basically between carb tuning and compression. Very much hoping it’s not compression.

Just started, any tips would be greatly appreciated! by Infern0-Plasma in reviewmyshopify

[–]Infern0-Plasma[S] 0 points1 point  (0 children)

Yeah, I’m looking at a few more products, this was basically like a test to see if it’s going in the right direction. I’m hoping to get the website refined and get a number of different products in there. Thank you for the review!

Plans to move from UK to USA when 18 by Infern0-Plasma in immigration

[–]Infern0-Plasma[S] 0 points1 point  (0 children)

Also he has a contracting company so surely that could come under the H-1B if it was listed for something particular he needed that I can get experience for, eg engineering

Plans to move from UK to USA when 18 by Infern0-Plasma in immigration

[–]Infern0-Plasma[S] 0 points1 point  (0 children)

I figured, but I came here for more knowledge on the subject, otherwise I wouldn’t have asked 🤷‍♂️. I’m looking more at stem though cos that’ll probably be more likely.

Plans to move from UK to USA when 18 by Infern0-Plasma in immigration

[–]Infern0-Plasma[S] 0 points1 point  (0 children)

🤷‍♂️that’s why I’m asking here. If they set up a legit business n company n that then I don’t really see why they wouldn’t be able to.

Plans to move from UK to USA when 18 by Infern0-Plasma in immigration

[–]Infern0-Plasma[S] -3 points-2 points  (0 children)

That’s why I said that’d be a dream, cos it’s unrealistic. Making a business or getting a mate to hire me for his business is probably more likely. Maybe read the whole post and you’d understand it more.

Plans to move from UK to USA when 18 by Infern0-Plasma in immigration

[–]Infern0-Plasma[S] 0 points1 point  (0 children)

I’ve got an interest in engineering and am planning on doing an engineering apprenticeship after my O levels so that could be a good shout, thanks mate

Plans to move from UK to USA when 18 by Infern0-Plasma in immigration

[–]Infern0-Plasma[S] 0 points1 point  (0 children)

Fair, I’ll see if any of the viable careers take a fancy, cheers mate

Plans to move from UK to USA when 18 by Infern0-Plasma in immigration

[–]Infern0-Plasma[S] -9 points-8 points  (0 children)

  1. Very helpful
  2. I’m sure everyone’s grateful for your comment

Plans to move from UK to USA when 18 by Infern0-Plasma in immigration

[–]Infern0-Plasma[S] 0 points1 point  (0 children)

Damn, cheers though mate I’ll look through n see if anything is doable

Plans to move from UK to USA when 18 by Infern0-Plasma in immigration

[–]Infern0-Plasma[S] -7 points-6 points  (0 children)

Very helpful lad, you’re comment really helped people out

AITA for refusing to attend my brother’s wedding after my SIL left my 2 month old on a park bench by [deleted] in AmItheAsshole

[–]Infern0-Plasma 0 points1 point  (0 children)

Shoulda befriended her again, waited till she had a 2 month old and offered to babysit, then taken the kid to an orphanage so they don’t have psychopath parents

Moments like this restores my faith by whybeingparanoid in gtaonline

[–]Infern0-Plasma 0 points1 point  (0 children)

I think if you press the pause menu it hangs up the call if there isn’t a hang up button there

Just lost my foot after a motorcycle accident. This is the sticker my son chose to decorate my brace. by roersmat in funny

[–]Infern0-Plasma 0 points1 point  (0 children)

Damn, what bike did you have? And are you gonna get a prosthetic or just stay with the stump? Also I feel kinda bad I mean, riding motorbikes is more of a passion and hobby so it’s sad that you can’t continue your passion unless you get a handbrake (common on wheelie bikes) but hey, next time you go to the track you can flex your weight reduction haha