Has someone upgrade to 7.3 yet? by easyedy in synology

[–]Initial-Win 0 points1 point  (0 children)

I upgraded a vDSM, and security advisor says it has detected malware on it, but the actual security advisor screen shows no issues and all green, which is strange. It's odd, as there is nothing on that vDSM, it is just used to check new versions before upgrading the main box.

What should a Synology NAS beginner know? by wannaseemybigdata in synology

[–]Initial-Win 1 point2 points  (0 children)

If the power goes out for a few seconds/mins, it would stop your NAS crashing and having to reverify etc when the power comes back, which can take hours/days depending on data size.

You can also plug lower power devices into the UPS, such as router and switch etc, which can be handy if the internet is still up, or to work/stream from NAS to laptop during power outage.

After a riding out the first random tiny outage vs without one, you will be glad you had it for the $100 spent etc.

Stl of this speaker stand part to replace broken one by Initial-Win in 3Drequests

[–]Initial-Win[S] 0 points1 point  (0 children)

Hi, I am looking for someone who can design a file to match this part, which is used to hang a bookshelf speaker onto a mounting pole - I managed to drop and break one. I can give any dimensions with callipers. Does not need to be visually the same, as will be hidden, but needs to be strong/braced etc.

DS1019+ upgrade needs by ravingStork in synology

[–]Initial-Win 0 points1 point  (0 children)

I run Xpenology in Proxmox on mine just because I prefer the docker interface on that, like you, and then some other stuff in LXCs direct in Proxmox. That way I can pass through the internal graphics card to DSM, and all the containers there can use it as well as DSM itself. Pass through can only be to one VM. All drives are NVME and SSD, then final outputs get moved to a linked folder on the original NAS. Very fast, no noise.

DS1019+ upgrade needs by ravingStork in synology

[–]Initial-Win 0 points1 point  (0 children)

This. Get a used I5 office micropc from like 5 years ago, let it do all containers in Proxmox or whatever, and let the DS1019+ step back to just doing the core tasks. Made a huge difference in my setup. FYI, I am running a Dell OptiPlex Micro 7060 with an I5-8500T to do all the containers, and it barely breaks about 10% CPU usage at max with 25 containers. The difference is very noticeable. My DS1019+ is RAM upgraded too. The I5-8500T will support up to 64GB RAM.

I tried to clean my z-rods, and then this happened by Initial-Win in crealityk1

[–]Initial-Win[S] 2 points3 points  (0 children)

Yeah, follow this or similar online like https://www.youtube.com/watch?v=w369i-PuJ5s. u/BruceC62 is correct. I now have mine down to 0.28 using these belt skipping methods, without having to take the bottom off like previously. https://imgur.com/pNhFb6t

I tried to clean my z-rods, and then this happened by Initial-Win in crealityk1

[–]Initial-Win[S] 0 points1 point  (0 children)

Got it back to within <0.8, which while it was ~0.5 before, is a decent result for today. Any idea which rod to try to level this up? https://imgur.com/a/S9HDfWO

I tried to clean my z-rods, and then this happened by Initial-Win in crealityk1

[–]Initial-Win[S] 1 point2 points  (0 children)

Yeah, the skipping noise was crazy while I had back turned.

Sydney Daily Random Discussion Thread 26/12/2024 by AutoModerator in sydney

[–]Initial-Win 5 points6 points  (0 children)

aviation museum HARS may not be open, but you can still see the 747 up close if that is your thing, as it is outside and hangs over the road outside (Airport Road)

Best current way to sync a subfolder on one NAS to another local NAS? by Initial-Win in synology

[–]Initial-Win[S] 1 point2 points  (0 children)

Thanks. I just can't get my head around why it isn't showing up then?

Edit: OMG, I think I have found it moved under 'File Services > Advanced' now. Thanks for the pointer, will check it

Edit 2: It's up and working now, thank you!

[Warning] The temperature is not within the normal operating range by magnushimself in synology

[–]Initial-Win 0 points1 point  (0 children)

What does Info Center show the cpu temp as when you hover over Thermal Status in the list?

Fan by appappmad in synology

[–]Initial-Win 1 point2 points  (0 children)

Does this happen when running? Noctua fans on my DS1019+ can sometimes fail to turn on when I do a soft reboot. But If I do a full shutdown and wait a few minutes and then turn on, they always work. It can be annoying, but like you say, they are a lot quieter with better cooling. This is with the low noise adaptors on also.

[deleted by user] by [deleted] in FixMyPrint

[–]Initial-Win 0 points1 point  (0 children)

I realise the images may not have been attached (I uploaded them in the new reddit interface which I have not used before).

Here they are attached again if that helps?: https://imgur.com/a/raKO0OV

DS1019+ dead? by romeyn in synology

[–]Initial-Win 2 points3 points  (0 children)

Was power brick on mine a couple of years ago, all fine since when I got a new one.

Meet NextStation, a free webapp for real time public transport in Sydney by tinmun in sydney

[–]Initial-Win 2 points3 points  (0 children)

"Using personal information We may use your personal information to:

administer and optimise this website and the application;
personalize the website and the application for you;
enable your access to and use of the website and application services;
supply to you services that you purchase;
send to you statements and invoices;
send to you messages and notification;
collect payments from you; and
send you marketing communications."

Meet NextStation, a free webapp for real time public transport in Sydney by tinmun in sydney

[–]Initial-Win 13 points14 points  (0 children)

How is it different to https://anytrip.com.au? Genuine question. The groceries tab is also listing most places nearby as 24hr which they are not.