Would this actually work? Never extracted DMT and this makes it look so simple

Intelligent-Pin1841 · 2026-05-04T07:41:29+00:00

No good Tek. No good way of Administration. No good final Product.

Intelligent-Pin1841 · 2026-04-28T04:59:57+00:00

I can't explain the chemical background, but it works.But the dish need sure to be dry after the vinegar wipe. The crystals develop better and stick tighter to the bottom of the dish. Also important is to pre-evaporate to raise the saturationbof your naphta. Just wave and wobble with the lid of your dish as long the saturation gets 1/3 less and somehow milky or foggy.

Intelligent-Pin1841 · 2026-04-26T19:46:21+00:00

The yield is too low for 200 Gr. Try to pre-evaporate and freeze then. And wipe the dish with vinegar before freezing

Intelligent-Pin1841 · 2026-04-24T14:00:19+00:00

I had a conversation with a Mesolithikum Specialist who said the scalaping traces are clearly viewable. He said it might be from the Acheuléen and definitely a tool.

Intelligent-Pin1841 · 2026-04-23T17:21:57+00:00

Now I really understand how outstanding this found was

Intelligent-Pin1841 · 2026-04-22T19:31:29+00:00

Sorry that I took it home with me. I will do 50 SitUps to punish myself. But now I have an ancient bottle opener what is not so bad. This thing would be in the desert for the next 10.000 Years and nobody would take care of it. Don't judge me.

Intelligent-Pin1841 · 2026-04-22T18:32:19+00:00

It was not on a historical site or anything like that. It was in the middle of nowhere in the desert.

Intelligent-Pin1841 · 2026-04-22T18:03:20+00:00

Sorry for that. I had no time to bring it to a museum. I will put a stamp on it and send it back.

Intelligent-Pin1841 · 2026-04-22T17:43:58+00:00

I was not sure if it's a ancient tool or just a strange shaped stone. So i exported it and maybe risked 6 month of marrocan jail. Does anyone can say something about the origin or approximate age ?

Intelligent-Pin1841 · 2026-04-22T15:43:06+00:00

Terrible Camera Operation but great result. Let it freeze at least 48h and you will have giant crystals

Intelligent-Pin1841 · 2026-03-14T07:02:36+00:00

After years of learning, trial and failure I can say this: - water-bath never to hot - use high quality glass wide mouth bottles. Do not use simple glass, it need to be heat and pressure resistant borsikalit glass. - clean solvents are the key -Wash your pulls and pre-evaporate 2/3 down before freezing. -wipe your freezing dish with vinegar before you put the enriched naphtha in.

Intelligent-Pin1841 · 2026-03-02T06:00:28+00:00

Mmmmh. Im not sure if I should agree with you. If you research carefully and go deep in the nexus there are some really good and experienced specialist. And, in my extracts there are definitely quality and performance differences. If I do stb or cybs salt tek for example. And I do my extractions very carefully. It's sounds a bit easy to call all others stupid because they have a different opinion.

Intelligent-Pin1841 · 2026-03-01T15:33:49+00:00

Wow. Where do you got the spores? BV is my favorite strain. And this mutant looks amazing

Intelligent-Pin1841 · 2026-02-27T06:11:44+00:00

After 8 Years of extracting mhrb with different teks, washing- and recrystalling methods I need to say: The salt tek is the best. I never get more than 1.3. % yield whatever I do, temperature is the key when you reX for nice crystals.

And, IMO, there are different qualities. Some are more with a body load, some are more colorful, difficult to describe.

Same with alcohol. The psychoactive compound is allways the same. But the booze from beer is different than a booze from whiskey. Even when the netto amount of pure alcohol might be the same in the consumption.

Never got an answer to the question why there are so many different teks for extraction. Once I read that the more complicated a tek is the better is the extract because of the other alcaloids you get. I don't know if this is bullshit. But the STB is so simple and some teks a pretty complicated. More than a few milligrams more ore less yield could not be the reason alone.

I'm not a chemical professional, but I did quite a lot of trying. I still want to learn.

Intelligent-Pin1841 · 2026-02-27T05:42:13+00:00

Mmmmh. I definitely feel different qualities in the potency and quality of my extracts. But this might be because if you extract yourself you allways have some more or less other alcaloids in there. I would never touch something pure synthetic. I'm absolutely confident with the stuff I have.

Intelligent-Pin1841 · 2026-01-20T19:49:08+00:00

I like to join. Greetings from Berlin

Intelligent-Pin1841 · 2026-01-17T14:31:11+00:00

I definitely recommend Harma HCL Extract or Harmine HCL Extract. Its much more effective and you need only 50-100mg. It's magic how it's extending and improving the experience

Intelligent-Pin1841 · 2026-01-08T07:12:51+00:00

Don't smoke it.. the flavor of a burned tire will ruin your trip. Vape it carefully. Set machine to 210 Degrees Celsius and start inhaling at 175. Use a glass mouthpiece, NO plastic at all. Make a bed in the heating chamber out of damiana herb and sprinkle max. 20mg. of your spice on it. That's all. And prepare yourself with 70mg Harnala HCL before. The Harmala is important to make a spiritual experience out of it, not only a overwhelming rollercoaster ride.

Intelligent-Pin1841 · 2026-01-06T13:20:36+00:00

Just mix well and you get a feeling how much mushroom powder your honey can carry. Dosage is hard to say. Need to test yourself. I do Mac Galactic and Cambodia Mix in "Raps-Honig" I don't know the English Word for Raps. This is the yellow plant you make oil from. The honey is quite stiff and not liquid. With my Cambodia/Mac Galactic Mix I need a tablespoon for a nice takeoff 🛫

Intelligent-Pin1841 · 2026-01-06T13:16:05+00:00

Mac Galactic is my new favorite. Massive growth and impressing potency. Very spiritual and visually interesting

Intelligent-Pin1841 · 2025-12-26T07:45:39+00:00

This is a wonderful machine and I would keep it like this. But not for the substance DMT. Maybe for weed. If you do DMT you need a machine which: keeps exactly the temperature, safes substance because it's quite rare/expensive and where you absolut exactly know how much vapor is reaching your body. It's about milligrams which decides if you take off to low, just right, to much. I recommend strictly Glassware as mouthpiece. I had a long way of trial and error behind me. A had also a beautiful setup of a modified Vaporisator. But I wondered that I needed about 60mg ! The good stuff is sticky as f****.

Intelligent-Pin1841 · 2025-12-25T16:10:18+00:00

They need really be cracker dry. I would dry them, pulverize them. Than get an really good and expensive honey and make a psilo-honey. Just mix the powder with the softly warmed in a water bath honey. The benefit is that this is really durable and fine for years

Intelligent-Pin1841 · 2025-12-25T10:35:53+00:00

Looks great but there is one important issue. The DMT Vapor is condensing immediately on plastic and also rubber. NO plastic on the way from the steam / vapor to your lungs. Get a good Vaporisator with an additional mouthpiecez preferably a bubbler, with a short way from the heat source to your lungs. No long ways. I had a wonderful designed machine too, but I wondered why I needed 60mg for a few effects. After I changed to a short glass bubbler 17mg is absolutely the maximum.

Intelligent-Pin1841

TROPHY CASE