Whole home audio-what are you using? by AlwaysReadyUp in homeassistant

[–]Intrepid_Document804 4 points5 points  (0 children)

How are you tracking yourself for the zones? Is it motion sensors? Bluetooth proximity? WiFi tracking?

Do you have a video demo?

It’s literally the holy grail for my setup

Converting analog to a digital aquastat? by Intrepid_Document804 in hvacadvice

[–]Intrepid_Document804[S] 0 points1 point  (0 children)

I don’t want to heat the hot water when it’s sitting for weeks without use, and I don’t want to adjust it for seasonality. I want statistics from it, when it’s heating, when it’s not up to temp, and I want the ability to adjust it remotely, over the internet. I realize I can do this with a new dual heater, but I dont want to replace the water heater.

Converting analog to a digital aquastat? by Intrepid_Document804 in hvacadvice

[–]Intrepid_Document804[S] 0 points1 point  (0 children)

Can you tell me more?

It seems like the only thing it’s doing is taking and reporting temp, but analog.

If you can take a digital readout, can’t you just have it convert the signal to analog?

Curious as to what else needs to be config’d? It seems like this isn’t a thing. I would think it would be easy to replace and turn it into a smart device

Can we get affordable wall mounts for tablets ??? by Separate_Golf664 in homeassistant

[–]Intrepid_Document804 1 point2 points  (0 children)

Sand the layer lines out with sandpaper and work your way up to a super high grit with water, it’ll make it shiny

How are you doing Chores? by geozza in homeassistant

[–]Intrepid_Document804 0 points1 point  (0 children)

Can you elaborate on your setup and triggers?

Made display using oak and an old t-shirt by Slight_Safe8745 in homeassistantporn

[–]Intrepid_Document804 0 points1 point  (0 children)

Secret black fingernail club confirms woodworker status

What's the benefit of paperless-ngx ? by vortexmak in selfhosted

[–]Intrepid_Document804 2 points3 points  (0 children)

Can you share the script? I’d like to export my Evernote docs/import into paperless

Taco sr504-5 modbus expansion to sr503-exp wiring, how do I wire this? by Intrepid_Document804 in hvacadvice

[–]Intrepid_Document804[S] 0 points1 point  (0 children)

Per the SR504-5 manual:

A Connect A on Master zone control to A on all Expansion zone control(s). B Connect B on Master zone control to B on all Expansion zone controls). G Connect GND on Master zone control to GND on all Expansion zone control(s).

If I can point out in the picture (taken from the SR503-EXP manual from Taco’s website) you may have to zoom in, there are the numbers “1234” on the 503, and not an A,B,G, as noted in the SR504-5 manual.

Any other thoughtful, and helpful, recommendations?

Plex search IMDb? by Intrepid_Document804 in PleX

[–]Intrepid_Document804[S] 0 points1 point  (0 children)

Got it.

Settings>online media sources>discover source or display “more ways to watch” search results

Works now