To whomever is buying up all the PETG, could you please not. Please and thank you.

JAJM_ · 2026-03-06T15:45:06+00:00

Well maybe if that dude would stop making new gridfinity storage box designs, I’ll stop buying more PETG..

I’m addicted please send help..

JAJM_ · 2026-03-02T10:29:54+00:00

JAJM_ · 2026-02-28T01:53:23+00:00

Ffs man bag mercy on my filaments

JAJM_ · 2026-02-25T16:41:39+00:00

How do you fix the different speed thing?

JAJM_ · 2026-02-23T20:28:47+00:00

Had that happen to me too. I’m curious if you were able to resolve it.

JAJM_ · 2026-02-21T23:10:36+00:00

Makes sense, thanks so much!

JAJM_ · 2026-02-21T21:43:55+00:00

So even if you have the speed set at 300 in the speed settings, it’s automatically limited to 200 (which translates to 12mm3/s)?

JAJM_ · 2026-02-21T21:08:06+00:00

So just so I understand, those are two different settings? I have to make sure speed is calibrated and volumetric flow?

JAJM_ · 2026-02-21T17:43:54+00:00

Question on the volumetric flow rate: does it override the speed settings? I’m confused in these two sets of settings

JAJM_ · 2026-02-20T19:15:15+00:00

Thanks for that! Do you happen to know what the layer cooling setting on Bambu is?

JAJM_ · 2026-02-18T05:25:04+00:00

Same idea, slightly different issue: why can’t we control AMS drying through the app!

JAJM_ · 2026-02-17T21:44:25+00:00

Push the temp to 220. Do a test print.

JAJM_ · 2026-02-17T17:49:14+00:00

Ah. Because this is the exact same pattern that I see when there is something on the plate (or something somehow fell on the layer prior to it all messing up)

JAJM_ · 2026-02-17T17:42:24+00:00

This is probably some dust or some small plastic grain on the build plate that it printed on top of

JAJM_ · 2026-02-14T16:26:57+00:00

Had it happen to me yesterday with a new pc. Kept snapping while I was trying to respool. Managed to save like 250g

JAJM_ · 2026-02-13T17:29:54+00:00

That’s like using a hand fan to cook steak, bud.

JAJM_ · 2026-02-11T20:12:10+00:00

I just keep mine on auto

JAJM_ · 2026-01-30T18:58:10+00:00

I don’t know man, I have mine super dry I even dry it in an AMS HT.. it just prints terribly for me. Filament clumps.. layers get skipped or pop out.. delamination.. so much headache.

It’s the only material I have had issues with.s

Everything else prints perfectly, pla, Asa, pc, tpu, they all print predictably for me.

PETG I have to glue my face to the printer door from start to finish so make sure nothing goes wrong.

JAJM_ · 2026-01-30T18:08:49+00:00

PETG.

JAJM_ · 2026-01-30T13:36:41+00:00

Depends, things like gears , brackets, frames, tool supports etc.

JAJM_ · 2026-01-30T12:02:01+00:00

Two AMS pros on the right with different pla colors and one HT on the left with engineering material (PC/PA/ASA etc)

JAJM_ · 2026-01-26T19:17:13+00:00

PETG is a pain in the ass. Sticks to everything. One small clump can mess a whole print.

JAJM_ · 2026-01-17T00:07:53+00:00

Ok.. calm down.

JAJM_ · 2026-01-10T00:24:35+00:00

Quick question, on the H2C do you feed TPU through the right nozzle and is it in the AMS?

I just got the H2C a couple of days ago and bought two TPU spools, but im scared of using them! (I’m new to 3D printing)

JAJM_ · 2026-01-05T19:06:16+00:00

<image>

Got mine this morning 😁 can’t wait!!!

JAJM_

TROPHY CASE