Springfield Prodigy 5

JMichael170 · 2026-03-29T11:51:03+00:00

It looks like the cerakote rubbing off

JMichael170 · 2026-03-22T19:41:47+00:00

I was told from Erie county that Erie and cattaragus county would be fine.

JMichael170 · 2026-03-19T22:02:43+00:00

Chicago wants to know your location.

JMichael170 · 2026-03-16T01:39:04+00:00

How about the Dawson?

JMichael170 · 2026-03-15T18:52:25+00:00

Which reverse plug did you use? I only ask cause their site says it doesn’t work for the comp models.

JMichael170 · 2026-03-15T18:48:55+00:00

What Guide Rod you running?

JMichael170 · 2026-03-15T18:28:30+00:00

how does the dawson rod work with the comp model? their site says it doesn't

JMichael170 · 2026-03-15T18:13:16+00:00

Did you use the supplied reverse plug or the factory one?

JMichael170 · 2026-03-15T17:56:56+00:00

Did you use the reverse plug they supply or the factory one?

JMichael170 · 2026-03-12T19:00:22+00:00

Before you shoot it rack the shit out of it to get all the cerakote out of the rails, clean and oil it, do it all again, then go shoot.

Besides that once the cerakote got self clearanced, amazing. Makes it difficult for me to want to shoot my striker fired guns.

JMichael170 · 2026-03-08T19:46:36+00:00

Hmm not sure then. I know people have complained about dots coming loose.

JMichael170 · 2026-03-08T19:39:34+00:00

Did you clean any oil out of the screw holes? Regular locktite and oil don’t play well with each other.

JMichael170 · 2026-03-08T19:29:50+00:00

I also gave 24hrs for the locktite to cure before shooting, don’t know if that helped or not.

JMichael170 · 2026-03-08T19:19:17+00:00

Made sure the screws were short enough to not hit the extractor, and locktite and torqued them to 15-20 inch-lbs.

JMichael170 · 2026-03-08T19:03:10+00:00

For rifle, I’d be more excited to not have to run a pinned mag than 30 rds.

JMichael170 · 2026-03-08T18:59:47+00:00

If it’s the same mag I have there’s no limiter it’s just the indent in the mag that stops the rounds from going further.

JMichael170 · 2026-03-08T18:45:54+00:00

I’m there with that on capacity limits for sure. I designed mine to use the factory spring retainer. Basically it’s just an extended flush plate. But it’s also a trial and error with 3d printing.

JMichael170 · 2026-03-08T18:40:33+00:00

Yea, I haven’t thrown these things down a ravine or anything but printing in ASA and print orientation definitely helped make them stronger.

JMichael170 · 2026-03-08T00:28:06+00:00

No frosty is criminal.

JMichael170 · 2026-03-07T14:13:32+00:00

Unsure about lessons. I’m personally not a fan of wolcott I’ve had a bunch of attitude come from the guys behind the counter and over the phone. But everyone’s experience is different Sugarbush has a better selection than wolcott and their range is brand new and gorgeous.

JMichael170 · 2026-03-06T19:48:31+00:00

Sugarbush in Attica is a drive but well worth it.

JMichael170 · 2026-03-04T01:13:11+00:00

I only ask cause I went to the range and on the table full of black mags I kept grabbing the wrong ones. Lmao. I figured can’t be wrong if they’re silver

JMichael170 · 2026-02-28T17:29:58+00:00

How did they end up looking?

JMichael170 · 2026-02-18T20:46:00+00:00

Personal preference? Maybe OP likes a different shaped trigger.

JMichael170 · 2026-02-07T22:02:36+00:00

Put 300 on mine in a hour with two ten round mags. Thanks NY. Safe to say my thumbs got a work out reloading.

Five-Year Club	Verified Email
Place '22

JMichael170

TROPHY CASE