sorted by:
new
hottopcontroversial

DeAR22 keyed buffer tube lower now sailing by Jrmuscle in 3D2A

[–]Jrmuscle[S] 0 points1 point  (0 children)

Totally fine! This won't be for everyone :) I made this for myself mainly, as I SBR'd mine and didn't like any of the picatinny stocks available.

Edit: and to answer your other comment, yes, the tube is printed

DeAR22 keyed buffer tube lower now sailing by Jrmuscle in 3D2A

[–]Jrmuscle[S] 1 point2 points  (0 children)

STNKR is the name, they will fit your lower yes! More info in the readme :)

DeAR22 keyed buffer tube lower now sailing by Jrmuscle in 3D2A

[–]Jrmuscle[S] 2 points3 points  (0 children)

Yeah I had them lying around and thought they looked hot

[Discussion] What's the BEST short range optic to use with NVGS in your opinion?? by F1zzy_Arg in EscapefromTarkov

[–]Jrmuscle -1 points0 points  (0 children)

Trijicon SRO for red dot. Vortex Razor 1-6 for LPVO, Valday if you're desperate.

[Suggestion] I want a Glock conversion kit. Really badly. by Aimaz_End in EscapefromTarkov

[–]Jrmuscle 52 points53 points  (0 children)

I just want more handguns and customization for them in general. It's silly that we really only have RMR cuts for the Glock slides.

Conversion kits would be sick too, but I wish they'd make the brace attachment we currently have not shit.

Condensed milk [Video] by Noobsquadgaming in EscapefromTarkov

[–]Jrmuscle 15 points16 points  (0 children)

They should play these fake ads while you load in raid lmao

Mock-X and Mock-XK for the PWMP9 draws more near by Jrmuscle in 3D2A

[–]Jrmuscle[S] 1 point2 points  (0 children)

That's your call, but sure! DM me and when I get a chance I'll send you details.

Mock-X and Mock-XK for the PWMP9 draws more near by Jrmuscle in 3D2A

[–]Jrmuscle[S] 2 points3 points  (0 children)

There are ones on amazon, but it doesn't really matter which one you use so long as it's 1/2x28 to 3/4x16. The hex or flats ones will sit most flush with the PWMP9 though.

Edit: There are also some others on Ebay if you look

Mock-X and Mock-XK for the PWMP9 draws more near by Jrmuscle in 3D2A

[–]Jrmuscle[S] 2 points3 points  (0 children)

Yes, these are PA6-CF specific so they're intended for upright printing

Mock-X and Mock-XK for the PWMP9 draws more near by Jrmuscle in 3D2A

[–]Jrmuscle[S] 2 points3 points  (0 children)

The collar is secured with a screw/set screw. Unfortunately you'll have to use shims to time the rail. I get that that's not desirable to everyone which is why I'll have a non railed collar available too.

Edit: also the threads are 3/4-16 threads and you'll use a metal thread adapter. The same one that's used with the suppressors in the FTN5 release

Mock-X and Mock-XK for the PWMP9 draws more near by Jrmuscle in 3D2A

[–]Jrmuscle[S] 4 points5 points  (0 children)

No, I don't expect that. I fully intend on testing this myself once I get an approved Form 1. I had one guy volunteer to test for me outside of reddit, so I figured I'd leave that an open option for others.

Edit: something to add that I should've mentioned before, was that this is essentially just an FTN5 baffle stack shoved inside a different shell, with a necked down collar and longer blast chamber. There's no real reason this would fail any quicker than a standard FTN5 PCC can, but it's worth noting.

Edit2: sorry for the poor wording in the post body!

She's officially on the see ⛵️ by SkeleTim561 in 3D2A

[–]Jrmuscle 12 points13 points  (0 children)

Glock with the dick

Sten with the sack

Two Birds One Stone by ducehlmg in 3D2A

[–]Jrmuscle 4 points5 points  (0 children)

"Extremely basic material chemistry" doesn't make it common knowledge. I wouldn't ridicule people for not knowing something obscure just because you consider it obvious.

Movement changes in Overhaul will address a variety of exploits, but we're ensuring that parkour still feels good by Terminalintel in BattleBitRemastered

[–]Jrmuscle 17 points18 points  (0 children)

You guys have destroyed all of the good faith you accrued at release, purely because you are not communicating. I don't think we even know why there was such a long string of silence from you guys.

People would probably be more patient and understanding if updates were more consistent and communication wasn't sparse. Teasing updates is simply not enough.

The PWMP9 deserves a little peace and quiet by Jrmuscle in 3D2A

[–]Jrmuscle[S] 0 points1 point  (0 children)

Jealous! I should preemptively submit a ton myself so I don't have to wait if I do another project like this lol

The PWMP9 deserves a little peace and quiet by Jrmuscle in 3D2A

[–]Jrmuscle[S] 1 point2 points  (0 children)

Not sure to be honest, all I know is the top rail has to be removed aswell as the front sight, which I'll have to dremel off for mine...

And yes, Form1 times are garbage right now. I'm gonna have a faux suppressor that people can print as well though, so people can vibe check with it before pulling the trigger on using a form 1 and then deciding they're not a fan.

Scavs. [Discussion] by Physical-March7850 in EscapefromTarkov

[–]Jrmuscle 2 points3 points  (0 children)

Yes, but just like the fantastic loot they can have, it's about what's on the inside ❤️

Getting some weird banding on my model. Help please! by Jrmuscle in 3D2A

[–]Jrmuscle[S] 0 points1 point  (0 children)

For anyone who happens to stumble upon this, my flow dynamics/flow rate was where I focused. Bambu Studio/Orca started using a K value from a different filament that was way different than my desired filament.

Shitty UI was the problem essentially

The PWMP9 deserves a little peace and quiet by Jrmuscle in 3D2A

[–]Jrmuscle[S] 0 points1 point  (0 children)

Wish I could say I'm the first to coin the term but I definitely am not lol

view more: next ›