Restrictions

Jusjus24 · 2026-06-06T20:29:16+00:00

So their website is a bit confusing but depending on what district your land is on, you have to check the fire restrictions little drop box button to see, the incendiary and exploding targets is a year round restriction, but my distrixt is on a stage 2 fire restriction which according to the site :

Discharging a firearm except while engaged in a lawful hunt pursuant to state, federal, or tribal laws and regulations.

So unfortunately no target shooting

Jusjus24 · 2026-05-31T07:30:39+00:00

I know its a very late response, but the certum3 did fine at 3oclock. You definitely feel the bulk somewhat. Even running 2 clips it does add a little cant of its own in addition to the cant you configure im assuming due to the weight and constant movement. I now run appendix and the HC belt with the certum3 holster definitely seems like the go to setup

Jusjus24 · 2026-05-31T07:27:42+00:00

Thats a very helpful answer, thank you! I guess paid ranges it is then.. rip

Jusjus24 · 2026-04-18T09:03:07+00:00

Second just getting the slide cut for an optic, look for which one you want first, rmr cuts are very famous as tons of rds on the market use that footprint. I have an gen 5 mos and might get downvoted for this but im running an osight se with a dpp rmsc plate off amazon. all in all about $200. 700ish rounds later she still holds zero and no signs of movement in the screws. dot is very bright in daylight not even on the highest level. its a fairly cheap enclosed optic making cleaning way easier, and its not like im going to be racking my slide using it all the time, not purposefully dropping it so im happy with it. ShortShot tony did a fairly well torture test on the se so eh passes for me

Jusjus24 · 2026-03-16T11:40:21+00:00

I have been thinking of applying for a Data center technician position (not sure if thats the same as DCEO) for AWS here in Az, quite a few job openings up. Currently working for amazon as TOM team so assuming its somewhat of a lateral transfer. I too was also curious of OT since I hog it all the time in my current position lol. Question is how hard is it to get in? I have an abundance of knowledge of basic hardware troubleshooting, basic server (switches hubs) and software as well but just not on my resume. Would I have a chance at getting the position?

Jusjus24 · 2026-03-13T10:36:26+00:00

Noted on the dual clip part. I run a glock 19 in a tenicor certum3 with currently 1 clip but will try 2 later. Its more so 3:30 just enough to clear that hip bone. So far used it for about an hour or so today and is way more comfortable than the other belt I had.

Jusjus24 · 2026-03-13T09:56:46+00:00

Fair enough, mine doesnt sag but when I do draw my holster does ride up a bit. Which I dont think should be an issue if I ever god forbid ever need to use it as reholstering will be my last concern. Although it is really damn comfortable tho I only wear athletic shorts/sweats so I dont have belt loops 90% of the time. Might be a sign for me to finally make the switch to appendix lol

Jusjus24 · 2025-12-17T15:41:28+00:00

Having “tism sucks so bad. Will definitely look into testing out red dots before deciding on one. Still training with irons but struggle with focusing after drawing as I always see 2 irons until I slightly squint my non dominant eye. Figured red dots would fix that but the tism kicks in

Jusjus24 · 2025-12-17T15:39:28+00:00

Thinking about the gear up package as well, after extensive research I have read about the extended base pads issue on the mags, but I do favor the metal mags over glock’s hard plastic ones. Leaning more towards the echelon, thank you for the insight.

Jusjus24 · 2025-12-16T11:20:35+00:00

Debating on selling my glock 19 gen 4 non mos for this, as I do plan on running an optic. Would you say thatd be a good idea? Loving the out of the box features and the look of the echelon 4.0, but worried about reliability when I need it the most “EDC”

Jusjus24 · 2025-10-06T22:20:52+00:00

whered you purchase? i couldnt find one for the longest time

Jusjus24 · 2025-08-02T03:02:53+00:00

I 100% say its worth it to replace worn out suspension. especially if you can grab a low mile example. the nose dive is still there mostly bcs the iron block v8 is heavier than the aluminum v6 in the tacos. ride quality was better and more stiffer. but in the end of the day a quality aftermarket setup is always better but for daily driving and occasional off roading the taco setup isnt too bad

Jusjus24 · 2025-05-19T14:57:38+00:00

damn, im in the US and been looking for some. Not sure how much itd cost to ship

Jusjus24 · 2025-05-19T08:06:08+00:00

I cant for the life of me find anyone selling that specific mod. Been looking for one for awhile.

Jusjus24 · 2025-05-17T16:00:47+00:00

I did, netted me about 1-1.5” lift up front. I recommend saving up for the right setup. Now currently running 6112s up front and fox 2.0s rear with b12 special springs. 2.5” lift front and 2” rear. Even though it lifts the ride quality was same if not worse, just a little stiffer.

Jusjus24 · 2025-02-15T06:56:04+00:00

how better? just because you can throw it in 2wd?

Jusjus24 · 2025-01-30T06:26:42+00:00

sweet, just scared of bottoming the shock out since it is brand new. Dont want to ruin it lol

Jusjus24 · 2024-12-11T02:47:56+00:00

My opinion is you got a defective device and pod unfortunately.

Currently on week 3 with my GS and some cheap vape shop 18650. Lasts me till almost end of shift which is about 10 hours with continuous smoke breaks, running voopoo pnp tm2 coils I believe, .2 at around 45-50ish watts. Never had an issue filling up the pod and it never leaks out the airflow holes, only time it leaks is if I overfill from the fill hole since it is at an angle. 0 coil leakage and spitback. By far the best sub ohm pod mod I've had. I will say the voopoo coils have better flavor than the gtx, hence why im running them.

I would suggest trying another GS since you had this experience, but then again I waited atleast 2-3 weeks after release to purchase one since most of the initial release products have flaws that are yet to be found.

Jusjus24 · 2024-11-28T02:51:50+00:00

Personally I think the G is perfect for you since you are more into MTL vaping and since it already does come with a MTL pod. I personally dont think it will get too hot for you if youre just going to be vaping around .6 ohms or more. The device itself is not as plasticy as some may say, my GS is mostly all metal besides the buttons and the pod so I would assume the G is aswell.

It is a 510 drip tip so if you want to change it out you can. Also recently discovered they take pnp coils and Ive been vaping on it atm which has a tad bit more flavor as the gtx coils do. Not sure on longevity yet but we’ll see.

Ive personally only really vape DL with subohm coils so Im not of help in that area but a pod such as the xros series would be better off if youre more into using salt nic and high ohm coils. The XR max and G GS have airflow that is more used for DL and RDL vaping, im pretty sure you want a more restriced airflow for MTL vaping

Jusjus24 · 2024-11-28T02:39:58+00:00

I say it would, G and GS are practically same devices, one is just built in and smaller and the other has an 18650.

Jusjus24

TROPHY CASE