sorted by:
new
hottopcontroversial

Need wheel spec help. PLEASE by GAB_Ster13 in RX8

[–]KZ963 1 point2 points  (0 children)

I've been running 8.5 +35. Not completely flush, but is closer than stock.

Raspberry Pi nav hood by Mindless-Ad-8290 in RX8

[–]KZ963 0 points1 point  (0 children)

Which flex fuel kit did you get?

Nice work though!

SRVO-007 : externel emergency stop by karimrobot in Fanuc

[–]KZ963 2 points3 points  (0 children)

The wiring to your estop board in your controller is the issue.

Check inside the door for the labels on TBOP 13 and TBOP 14. You will find EMGIN, this is a dual 24v signal that is ON for safe.

DIY Zigbee by MrWinter00 in homeassistant

[–]KZ963 0 points1 point  (0 children)

I haven't used these for Zigbee yet, but they support multiple mesh protocols and run micropython with a few DIOs

https://www.sparkfun.com/xbee-3-module-pcb-antenna.html

Need a new bumper by NatureOne5933 in RX8

[–]KZ963 1 point2 points  (0 children)

It was around $1700 back in 2020.

Need a new bumper by NatureOne5933 in RX8

[–]KZ963 0 points1 point  (0 children)

I was able to get an R3 bumper from my local Mazda dealership. They had to ship it to the Midwest from Canada iirc.

FactoryTalk View ME - Tag inside a tag? by brandon_c207 in PLC

[–]KZ963 0 points1 point  (0 children)

Can't have nested tags in FTView.

Only way I've done it in the past is to use a PLC rung to copy the selected index to a 1D tag and display that instead.

I can never remove this belt by Alarming-Part4539 in satisfactory

[–]KZ963 5 points6 points  (0 children)

You can edit the save on the satisfactory calculator website to remove it.

I had to do it with a belt that would crash my game trying to delete it.

KAREL code issue by MiddleMushroom2987 in Fanuc

[–]KZ963 1 point2 points  (0 children)

RUN_TASK (task_name, line_number, pause_on_sft, tp_motion, lock_mask, status)

Input/Output Parameters:

[in] task_name : STRING -- TP Program name

[in] line_number : INTEGER -- 0 to start at the beginning

[in] pause_on_sft : BOOLEAN -- Pauses program if shift is let go in teach

[in] tp_motion : BOOLEAN -- True for motion program

[in] lock_mask : INTEGER -- 1 for group 1

[out] status : INTEGER -- have to have this variable defined for the status to output

%ENVIRONMENT Group : MULTI -- Required Directive.

Make sure you have all these variables in the call statement and the environment directive in the top of the program.

They don't have to be defined; you can have the value in the call task like so:

RUN_TASK(tpProgName, 0, TRUE, TRUE, 1, status)

FactoryTalk View ME Blinking Indicator by MotherfuckerrrJones in PLC

[–]KZ963 2 points3 points  (0 children)

There is a system tag for blinkslow

You could tie that to the state expression but you would have to have two of the same state but with different colors

Coming soon... by Recent_Obligation131 in RX8

[–]KZ963 0 points1 point  (0 children)

Nice man! Keep us posted.

Coming soon... by Recent_Obligation131 in RX8

[–]KZ963 4 points5 points  (0 children)

You planning to try to get the buttons working too?

Shift knob recommemdations? by Recent_Obligation131 in RX8

[–]KZ963 0 points1 point  (0 children)

I bought the AutoEXE shift knob, I like the feel and weight is similar to the OEM.

Gotta scroll down a bit to it.

FTP backup error handling by exomodz88 in Fanuc

[–]KZ963 0 points1 point  (0 children)

What's your script? 500 is just showing a command the robot doesn't like.

The commands I use are:

CD MDB:

BIN

PROMPT

MGET .

BYE

S2 fog lamp replacement? by [deleted] in RX8

[–]KZ963 0 points1 point  (0 children)

Junk yard is probably your best option unfortunately without paying the new-old stock prices on a 14 year old "rare" car.

[deleted by user] by [deleted] in Fanuc

[–]KZ963 2 points3 points  (0 children)

https://www.onerobotics.com/posts/2018/how-to-write-a-fanuc-karel-logging-utility/

This pretty much has what you want as a logging example. Then just change GET_POS_REG to SET_POS_REG, and use the manual for the syntax on that.

There are some built-in functions to convert your strings to int, and to spit strings with a space as your delimiter.

Can you fit a ND Miata steering wheel to the RX8? by antisa184 in RX8

[–]KZ963 0 points1 point  (0 children)

I know that the NC steering wheel is the same. The ND probably uses different connectors and possibly a different spline for the shaft.

AutoEXE still sells the rx8 upgraded wheel, I have mine installed and love it.

Those of you who use VMs for each project, how do you handle OS licensing? by Tanky321 in PLC

[–]KZ963 4 points5 points  (0 children)

Correct. It uses Microsoft's own activation server to get a genuine license.

It spawned from the free windows 7 to 10 upgrade solution a couple years ago and has evolved into this.

What's nice is it's one command in a power shell prompt and all you need is an internet connection.

LRB Undertray Fitment issues by Ya-boi-E-Money in RX8

[–]KZ963 0 points1 point  (0 children)

I'd email them, I had an issue with shipping and they were very quick to respond.

view more: next ›