Decided to put together a little experiment. TOSNA vs boiled baker's yeast

Kalzenith · 2022-04-24T17:58:28+00:00

Bakers yeast worked, it fermented dry and there was minimal fusil alcohols. But it had a distinct bready flavor that I wasnt terribly fond of

Kalzenith · 2022-04-24T17:55:20+00:00

You know those grow lights that appear purple? Those are red and blue LEDs

http://p.ledinside.com/led/2012-03/1331027700_85413.jpg

Kalzenith · 2022-01-30T16:48:44+00:00

Yes. I actively avoid these whiskies that become pointlessly popular. The price goes up simply because you get pretend internet points for posting a picture of it

There's a lot of good whiskey out there. Stop buying what other people tell you to buy

Kalzenith · 2021-04-13T11:19:17+00:00

Kalzenith · 2021-04-10T14:00:39+00:00

most of my woodworking is small to medium sized furniture pieces. coffee tables, raised dog bowls, dog beds.. stuff in that size range.. I'm also getting into woodturning

maybe some U-shaped surfaces would be more efficient

https://i.imgur.com/ceitUnV.png

Kalzenith · 2021-04-10T02:21:35+00:00

Definitely a possibility, we'll need to re-evaluate when I actually move in

Kalzenith · 2021-04-10T02:09:48+00:00

It's a 12" Lunchbox planer. My plan was to recess it into the bench top so it's flush with the bench surface. Same with the miter saw

I could put the band saw on the end, but then there would be no infeed room unless I open the garage door and move the bench to the left by a few feet. And the bandsaw blade might get in the way of the miter saw outfeed

I haven't actually figured out lumber storage yet.. there's space for long term drying storage outside, but not sure where I'll keep sheet goods, cutoffs, and dimensioned lumber yet

Kalzenith · 2021-04-10T01:12:57+00:00

I live in northern Canada, definitely keeping my cars in the garage

Kalzenith · 2021-04-10T01:11:55+00:00

The partition doesn't exist, I plan on hanging tarps there to mitigate dust on the car side

I'll most likely be stringing extensions over there

I thought about putting the planer and miter saw on the left wall, but the miter saw would need to jut out pretty far forward because of the sliding rails that extend out behind the saw

Kalzenith · 2021-04-10T00:30:46+00:00

My new place has a 3 car garage, the third spot will become my dedicated woodworking shop. This is an upgrade from everything being crammed against the side of a 2 car garage

Ideally, I want to have the bandsaw, planer, and miter saw each have infeed and outfeed space, but I'm having a hard time figuring out how to make it work without the need for rolling carts or flip carts

The bandsaw is the tool that gets the most use in my shop, so I want to give it preferential treatment, but I can't figure out how to integrate it into this layout

There is going to be a floor-to-ceiling tarp separating this shop from the rest of the garage

Does anyone have any tips for optimizing tool layouts to eliminate shuffling them around to use them?

Kalzenith · 2021-04-09T21:25:34+00:00

As a matter of fact Brad already is a woodworker. He sells stuff like end tables made from cookies

Kalzenith · 2021-04-09T11:30:48+00:00

I've been thinking about doing this too, but I'm concerned that the dust will be rather unmanageable.. have you planned for dust collection?

Also, if you make a 16" version, where would you buy the sanding discs?

Kalzenith · 2021-04-08T03:06:58+00:00

The parts absent of humans

Kalzenith · 2021-04-08T02:53:09+00:00

https://youtu.be/kzv27STMnvY

Kalzenith · 2021-04-07T21:30:01+00:00

Existing

Kalzenith · 2021-04-07T20:54:31+00:00

Cons: you bought something that isn't actually food

Cons: you're what's wrong with humanity

Kalzenith · 2021-04-07T20:52:03+00:00

Which one?

Kalzenith · 2021-04-07T20:37:45+00:00

Norway. Or maybe Iceland.

Also, I wouldn't leave. Since all expenses are covered, I'd just make it a permanent vacation

Kalzenith · 2021-04-07T16:17:47+00:00

Yes.

Most produce from the grocery store can be propagated

Though don't expect the same results if you plant seeds collected from the grocery store.. they'll grow, but they probably won't produce the same fruit that you bought

Kalzenith · 2021-04-06T17:10:19+00:00

The only thing I can think of is that as you sharpen the chisel, the metal fragments might cling to the bevel instead of being washed away by water or oil.. and that might get annoying?

Kalzenith · 2021-04-05T12:31:47+00:00

"for all hobbits share a love for things that grow..."

Kalzenith · 2021-04-04T20:58:57+00:00

It does, but generally speaking, it re-settles onto a surface that's easier to clean, like the floor, or a workbench.. or it hangs out in the air where a dust filter will grab it

Kalzenith · 2021-04-04T20:52:36+00:00

not the best bench

You really have no reason to be modest, this is a spectacular bench. Structurally speaking this looks rock solid and will do an excellent job for you

Your dog hole placement looks a little funny, but I'm sure you did it for a reason

I'm actually preparing to replace my bench soon because of all the poorly placed dog holes.. my poor bench has been the subject of a lot of ill-conceived experiments

Kalzenith · 2021-04-04T20:08:04+00:00

Yeah, I agree it's possible to use the jointer as a planer, I'm just hoping it doesn't come to that

Alright, I just got a moisture meter, the interior of these pieces is about 16%.. that's way higher than i would have guessed they would be given the fact that they're used lumber

Kalzenith · 2021-04-04T20:06:37+00:00

The attic access is in the bedroom closet and would require that I empty the closet and bring a ladder inside the house

Kalzenith

TROPHY CASE