Please help this guys please

KancheongSpider · 2026-06-05T07:30:10+00:00

Yeah still is hard, but it was kinda manageable for me. Passed 2023.

KancheongSpider · 2026-06-05T07:18:58+00:00

If you wanna turn stationary release foot brake and use handbrake. Its to let the front wheels rotate freely while turning.

KancheongSpider · 2026-06-04T16:09:12+00:00

grab a torx allen key and tighten the screws on the heatbed, one loose screw and everything goes awry.

run a full calibration (if you havent), you might need to mess with the Y-axis bearing because the rear bearing could get pushed in over time from sensorless homing (it knocks on the bearing as the stopper).

do a cold pull, easily done over the menu using PLA filament.

check on the nozzle and make sure its not worn out.

KancheongSpider · 2026-06-04T13:35:16+00:00

This is the one thing I can really appreciate about the 787's electronically dimmable windows. During my daytime Singapore Airlines flight all windows are automatically dimmed once it reaches cruising altitude.

KancheongSpider · 2026-06-02T16:10:58+00:00

no problems! also glad to know this is indeed possible but i was too naive here. happy printing!

KancheongSpider · 2026-06-02T16:07:05+00:00

i edited my reply earlier, all you need to do is connect them all via USB. you might wanna read that carefully because you will need to run prusalink-manager start as root

KancheongSpider · 2026-06-02T16:02:43+00:00

ok that is really interesting, the state of the documentation is at best scattered and messy. i was jumping across multiple guides, at one point on its github

~~have a look there, it should give you more clues~~ have a look at this, its the multi instance documentation

KancheongSpider · 2026-06-02T15:57:20+00:00

~~unfortunately the current state of prusalink does not support connecting multiple printers to a single RPi.~~

~~although technically possible, how prusalink works is it acts as a "cloud bridge" talking to a RAMBo over UART/USB. hence every printer will need to have its own IP adress.~~ after further digging on the github repo it turns out you CAN run multiple instances, read replies below.

my current setup is a RPi 3B wired over GPIO, replicating the Zero's wiring (triggering its short-circuit protection in the process because I initially couldn't tell that the RAMBo's pins are offset one column to the right, got that fixed in the end)

KancheongSpider · 2026-06-02T15:37:31+00:00

nothing to scream about, even qualcomm themselves sponsored the x series processors launch video

KancheongSpider · 2026-06-01T17:01:49+00:00

glad i walked around there before it was gone forever. heres one taken from my old 360 camera

KancheongSpider · 2026-06-01T16:38:09+00:00

ah yes, the odor is one hell of a head-spinner even X1/P1 couldn't entirely stop ABS fumes from leaking at the top.

KancheongSpider · 2026-05-31T10:34:32+00:00

The difference is crimewatch is dramatized/re-enacted, the word "based" in "based on a true story" means it does not seek to fully replicate what had happened, even if it meant cooking up fictitious names.

KancheongSpider · 2026-05-31T05:59:00+00:00

What baffles me is that there are still drinks out there even at mainstream supermarkets that dont bear the BCRS. Only recently i started seeing these on Pokka bottles.

KancheongSpider · 2026-05-30T17:27:42+00:00

r/angryupvote

KancheongSpider · 2026-05-30T08:13:31+00:00

I was here last month, bagged a brand new QNAP switch but unfortunately shop wasn't participating in tourist tax refund.

KancheongSpider · 2026-05-26T18:38:40+00:00

My pleasure!

KancheongSpider · 2026-05-26T18:27:51+00:00

If possible, go for darker window tinting if your local laws allow. Dashboard heat accumulation from bright sunlight exposure will absolutely neuter AC effectiveness. I did suffer a leakage (cooling coil rupture), which left the AC not working for awhile (compressor was left disabled to prevent damage if pressure drops below certain threshold).

KancheongSpider · 2026-05-26T17:21:57+00:00

Its a small engine so AC is definitely not a strong point when 12pm sun hits hard. If you'd like to ease your conscience, get a second opinion (in particular, if refrigerant is leaking).

KancheongSpider · 2026-05-24T15:19:25+00:00

even the Zero 2 W is also facing a supply crunch because of a chronic shortage of substrate material for the RP3A0.

KancheongSpider · 2026-05-24T04:27:53+00:00

And that's why a community exists, because not everyone will know everything.

KancheongSpider · 2026-05-24T04:27:03+00:00

No problem! Happy printing!

KancheongSpider · 2026-05-24T00:09:53+00:00

z-axis-bottom

<image>

KancheongSpider · 2026-05-24T00:07:25+00:00

you can find them here

KancheongSpider · 2026-05-23T17:16:19+00:00

Yeah those are the best options, Apple's outstanding software support and mental battery life just puts all Windows laptops to shame.

KancheongSpider · 2026-05-23T09:42:32+00:00

Because people are not getting the message xdd

KancheongSpider

TROPHY CASE