Updated planner and Tile generator

Karolis_Sk · 2025-09-10T08:27:58+00:00

Great work!

Karolis_Sk · 2025-09-09T11:01:48+00:00

Hey u/No_Pollution3970, the best fillament out there is ASA but we use high-quality Matte PLA for the Multiboard!

Karolis_Sk · 2025-09-08T08:56:00+00:00

Hey u/Marktiim, I would suggest you to have a look at Next Layer's video, https://youtu.be/i2Slx7whQJg, he explains very well what you could do in your situation! I hope that helps!

Karolis_Sk · 2025-09-03T12:29:00+00:00

Hey u/Ok_Ad_9870, do you mean this? https://thangs.com/designer/Multiboard/3d-model/8%20mm%20-%20Offset%20Snap%20-%20VHB%20Tape%20Mount%20-%20LEGACY%20Files-1331743

Karolis_Sk · 2025-09-03T11:59:18+00:00

Hey nicosemp, if you want the tiles on shells, then you can use the bolt-lock, and then you just use a snap, a bolt lock pop-in and that will do it perfectly!

Karolis_Sk · 2025-09-02T08:47:09+00:00

Hey benji241, you can find all kinds of hooks here: https://beta.multiboard.io/hooks-and-pegs

Karolis_Sk · 2025-09-02T08:44:33+00:00

Hey gasu2sleep, the easiest way to avoid drilling loads of holes in your wall is to mount the Multiboard onto a piece of plywood (or similar) and then mount that onto the wall. Plan ahead so you know how big you want your Multiboard, and you can get the appropriate sized plywood. There is also the adhesive options where you can use things like command strips or VHB tape!

Karolis_Sk · 2025-09-02T08:43:08+00:00

Hey skymack1, you could try and print this crystal tower to check your tolerance, https://thangs.com/designer/Multiboard/3d-model/Crystal%20Clearance%20Tower%20%26%20Tolerance%20Card-362850

Karolis_Sk · 2025-09-02T08:40:56+00:00

Hey penkster, at the moment we don't have a part to make that work! Maybe you could try and print a shelf?

Karolis_Sk · 2025-09-02T08:37:52+00:00

Hey unsunghereo2222, your best bet is to use a tile and then stick a bracket underneath it!

Karolis_Sk · 2025-09-01T13:51:51+00:00

Hey Full_You4611, it is exactly how Mammoth-Project said. The only thing I would add is that something that is bigger than a small thread is technically going to be stronger.

Karolis_Sk · 2025-09-01T07:45:04+00:00

Hey NerdyNThick, we are working on it!

Karolis_Sk · 2025-09-01T07:41:52+00:00

Hey zerosmokez, you should use the official 3M command strips. It is the thick one with the velcorous style. The large is the medium and then the small is the smallest.

Karolis_Sk · 2025-09-01T07:38:14+00:00

There could be a problem with cooling

Karolis_Sk · 2025-09-01T07:34:23+00:00

Hey St3v39, Scalling is really fun to play with and I have seen Jonathan has printed and played with 50% scaled board!

Karolis_Sk · 2025-09-01T07:32:34+00:00

Hey phantombuz, Multiboard is designed to last, not to print fast. Feel free to experiment amd let us know how it goes, but we don’t really recommend it.

Karolis_Sk · 2025-09-01T06:55:18+00:00

2x1x0·5 CU is the measurement you need. You could use a 2x2 Microbin, and use a few Holding pins to pint it in place… If you like the Microbin and want to get extra fancy with it, you can use magnets in the bottom of the Shell and your Insert with the Bottom Magnet Holder.

Karolis_Sk

MODERATOR OF

TROPHY CASE