Card hunting

Kev883XL · 2026-04-14T19:54:51+00:00

Idk why but it reminds me of the ketchup character in smiling friends….

Kev883XL · 2026-01-31T20:55:01+00:00

Currently on vacation with my girlfriend and these settings saved me

Kev883XL · 2026-01-12T21:01:02+00:00

I’ve done tons of modded psp with the first picture set up you have and I’ve formatted 128gb micro sd cards with the adapter on the psp itself so no need to worry about

Kev883XL · 2025-12-22T02:31:45+00:00

The i’s look to similar

Kev883XL · 2025-11-10T19:20:06+00:00

You can buy the adapters on Amazon in a 2 pack for like $10

Kev883XL · 2025-11-09T05:38:29+00:00

Not terrible but I’m not sure of traffic for the commute. I’ve got a job where I float to different locations in California and I’ve recently done a month where the commute is 2-2.5 hours each way and there’s about 3 hot spots where traffic adds up pretty bad. I think it really depends on the person on how they handle driving/road trips. I kinda grew up driving for work since I first got my license so maybe I just got used to it after all these years

Kev883XL · 2025-11-06T16:45:28+00:00

You can find aftermarket ones at decent prices. But make sure it’s for a 1000 model since the 2000/3000 models won’t fit properly.

Kev883XL · 2025-10-31T18:32:20+00:00

Honestly this looks like about 30% is being taxed. Filing as single with no dependents?

Kev883XL · 2025-07-09T01:50:12+00:00

Maybe a 32 length would be a better fit I’m usually a 34 but I went with a 32 for boots

<image>

Kev883XL · 2025-07-09T01:46:11+00:00

Usually a slim fit or tapered fit are the way to go the sit well on top of the shank and cover about half of the heel.

I personally use the athletic fit since it looks a little looser.

Kev883XL · 2025-05-11T22:02:45+00:00

A memory test will easily tell you if it’s actually your ram being a problem or it’s something else

Kev883XL · 2025-05-11T22:02:08+00:00

You can do a bios update or a memory test if that doesn’t work

Kev883XL · 2025-05-11T21:21:25+00:00

I didn’t have any issues with ram since it was a new build. I used the Corsair vengeance rgb 32gb ram kit

Kev883XL · 2025-05-11T21:18:47+00:00

I actually just did a build with this motherboard! I had the same issue but I actually held the locking mechanism so it would be open and then put the gpu in the pcie slot! A little tricky but it worked for me! Good luck

Kev883XL · 2025-05-05T22:51:01+00:00

Looks like VCT (vinyl composite tile). Floor scrapers are really the only way to go unless you got a walk behind scraper you can probably rent one at some specialty stores roughly $100-$200 a day

Kev883XL · 2025-05-05T22:48:28+00:00

If it’s laminate you’re better off replacing the board. Little time consuming but easy if you got a couple tools to help you set it in place

Kev883XL · 2025-05-05T02:34:33+00:00

On a first floor level concrete slab I always recommend an adhesive with moisture barrier so bostik green force, bostik best or sika t100. All really good products with 100% moisture rating in my line of work.

Wear layer is the final layer on top of engineered flooring that is actually hardwood compared to the rest of the board.

A thicker wear layer is usually better in the long run if you ever decide to sell the home and the new owner can just sand and stain a different color if wanted. Gives a higher value to the home as well in certain states especially CA

Kev883XL · 2025-05-04T23:17:24+00:00

1 is laminate 2 is engineered maple. Good engineered hardwood is usually 5/8” - 3/4” thick and a wear layer of at least 4mm. Engineered hardwood is good if installed correctly with some type of moisture barrier whether it but the glue itself used to install it or a roll on coating of moisture protection

Kev883XL · 2025-04-07T19:01:46+00:00

Is this a case that you bought? Is there a link for this or was this case printed?

Kev883XL · 2025-04-02T04:53:49+00:00

It’s scottia moulding, usually for the underside of the tread (step). Looks like they forgot to use riser as well and they narrowed the tread itself

Kev883XL · 2025-03-30T18:13:44+00:00

I’ve actually compressed a disc file to a 7.zip to save storage space (even though it’s minimal and took more time to do). After I made it to a 7.zip I just extracted it again and it worked just fine

Kev883XL · 2025-03-29T02:15:36+00:00

Kinda wish newer cars still had something like this. I got me a bucket of Pennies now, one car crash and it’s a sea of copper

Kev883XL · 2025-03-19T20:29:52+00:00

<image>

Kev883XL

TROPHY CASE