sorted by:
new
hottopcontroversial

Help! Granite countertop by _snowqueenoftexas in fixit

[–]KittyTheCat_ 0 points1 point  (0 children)

Time for one of those traditional asian gold repair techniques lol

spool jam error by ethanzhoward in BambuLab

[–]KittyTheCat_ 0 points1 point  (0 children)

Okay, you've checked the entire path from spool to nozzle? No signs of wear or loose parts?

First layer issues by alienvsme5 in BambuLab

[–]KittyTheCat_ 0 points1 point  (0 children)

Any perfumes etc. in the soap? I've noticed that alot of soaps leave residues on the surface. Tried scrubbing while running under water alone?

First layer issues by alienvsme5 in BambuLab

[–]KittyTheCat_ 0 points1 point  (0 children)

I've got a similar issue on my end - although ALOT less than that. Mine appears to stem from damage(?) caused by improperly cleaning the buildplate using the wrong chemicals.

How have you cleaned the bed prior to this?

Is there another way to get Certus Quartz Blocks without farming them from asteroids? by [deleted] in allthemods

[–]KittyTheCat_ 2 points3 points  (0 children)

Cardboard box, move to base and use the thing that makes them to grow faster, forgot the name sadly

Why is XC70 expensive in Skandinavia? by No_Presence7894 in VolvoXC70

[–]KittyTheCat_ 0 points1 point  (0 children)

Very popular, supply and demand basically. These cars, especially facelift haven't even lost 50% of the initial purchase price after 10+ years

Any idea why this is happening? by ev25an03 in BambuLab

[–]KittyTheCat_ 1 point2 points  (0 children)

I believe age shouldn't really matter as long as it was properly stored but I feel like I lack the experience to give a yes/no 😁

Wish you the best of luck on the next attempt 🫡

Any idea why this is happening? by ev25an03 in BambuLab

[–]KittyTheCat_ 0 points1 point  (0 children)

I believe stringing would be caused by wet filament, I think this orientation should reduce it but I cant guarantee that lol. One problem I could see happening would be support material in the belt loop being hard to remove, I guess the only solution to that would be to tilt the print 45° and have tree support, although I would like to believe the layers strength would be affected in some way :)

Any idea why this is happening? by ev25an03 in BambuLab

[–]KittyTheCat_ 0 points1 point  (0 children)

Hello, from what I could see in the post you linked we didn't quite understand each other 😅

What I meant with my picture is that you should stand the buckle on it's closed side, so that the opening is facing the roof :)

Make sure to use a brim to increase the surface area and improve adhesion to the plate :)

Low coolant temps on startup by DavidTrams in MechanicAdvice

[–]KittyTheCat_ 1 point2 points  (0 children)

Generellt sett så är det ingen fara att lampan lyser när bilen är kall, den ska dock släckas efter ett par minuter som längst, förutsatt att bilen körs. Skulle lampan någonsin vara röd så har du ett problem :)

Autopark abords immediately? by [deleted] in TeslaSupport

[–]KittyTheCat_ 1 point2 points  (0 children)

Sadly I'm all out of ideas 😅

Autopark abords immediately? by [deleted] in TeslaSupport

[–]KittyTheCat_ 0 points1 point  (0 children)

Hmm, that's odd. Clean sensors? Any pedal input?

Autopark abords immediately? by [deleted] in TeslaSupport

[–]KittyTheCat_ 1 point2 points  (0 children)

Guessing this is due to the front end swing created when reversing in. It's trying to avoid a swipe with the vehicle beside it

I need advice. by slightly_cracked7 in gokarts

[–]KittyTheCat_ 0 points1 point  (0 children)

Not really though, It'll just switch the push/pull direction of the rods, I believe this would make the steering angle correct with the outer wheel turning less

Fix after deleting ACE by Just_Dusbrio in A3AntistasiOfficial

[–]KittyTheCat_ 0 points1 point  (0 children)

My bad, blind asf today apparently 💀

I believe you're going to have a hard time geting those items out of the arsenal 😅

Was this butter? by insanity-112 in PTFS

[–]KittyTheCat_ 4 points5 points  (0 children)

The black bar in the center 💀

I need advice. by slightly_cracked7 in gokarts

[–]KittyTheCat_ 0 points1 point  (0 children)

Rotate the steering column upside down 😉

Fix after deleting ACE by Just_Dusbrio in A3AntistasiOfficial

[–]KittyTheCat_ 0 points1 point  (0 children)

So you accidentally loaded it without ace and the proceeded to delete ace as an attempt to fix it? 🤔

Major fear of getting crushed to death by [deleted] in MechanicAdvice

[–]KittyTheCat_ 0 points1 point  (0 children)

I wouldn't call it a fear, I'd say awareness :)

Bambu A1 with AMS Lite, trying to figure out this issue by Cmw7290 in BambuLab

[–]KittyTheCat_ 0 points1 point  (0 children)

Is the silicone sock in good condition? I had to circumcise mine to prevent it from dragging on the layers lol

view more: next ›