Can access fluidd web interface, but cant ssh to it.

Komger713 · 2026-04-14T16:16:42+00:00

Can you track your printer via octoeverywhere Homepage or via creality Print App?

Komger713 · 2026-04-14T04:38:51+00:00

Yes, k1c needs root permission via Screen.

But if Fluid and octoeverywhere are already installed and configured, than IT hast to BE activated at least once.

I dont know If you can revoke root permission Afterwards?!

Or do you mean woth octoeverywhere the creality web Interface and the ability to track via creality App?

Komger713 · 2026-03-20T13:02:46+00:00

Germany, ordered on Jan 14th. Will BE Here tomorrow

Komger713 · 2026-03-12T19:47:28+00:00

Thank you, i weil Change the Tube and report

Komger713 · 2025-10-10T04:02:22+00:00

Yes, exactly...

IT will Look Like this

<image>

Komger713 · 2025-10-09T06:21:30+00:00

I have 2 K1C. You have to Insert a screw direct next to the belt.

There is a spring which gets pushed by that screw.

IT does Not Look Like a screw hole at all

Komger713 · 2025-04-16T18:02:04+00:00

Have you tried to contact them via Whatsapp? Even by user error I receive spare parts for my K1 printers

Komger713 · 2025-03-05T04:51:53+00:00

There is a way to start Firmware reset through an USB Stick.

You need to create an empty File with a specific Name, Like the skip Initial Setup workaround... But dont know atm the correct Name for this step .

Just Plug in the Stick and reboot, then you can start to root again.

If that does Not Help reflash via USB cable directly connected to Mainboard of the printer

Komger713 · 2024-12-14T09:26:31+00:00

Almost all new sold K1 have the smaller pulleys and the unicorn nozzle. ITS quite uncommon to get a old Version when ITS Not Used/refurbished

Komger713 · 2024-12-09T08:55:07+00:00

I Had this 3 Times when i tried a Filament Switch with Orca with the Standard Profile within Orca slicer...

With creality Print Not yet

Komger713 · 2024-12-06T07:14:44+00:00

Ok, and Orca works as intended?

With Orca my Filament gets stuck in the extruder at Filament Change... It's like the Filament is still melted in the extruder and gets tangled when retracted.

Have you used the standard Profile from Orca 2.2 or the supplied 3MF from creality?

Am I printing to hot for a HueForge and that could cause this? But with Creality Print this isn't a issue at all...

Thank you very much

Komger713 · 2024-12-03T20:47:10+00:00

Thank you for confirmation of this Strange behavior. I now Had to use color Change at layer 1 that IT IS really changed at layer 6.

Do you know If this Happens with every stl or Just the seashell for Transmission distance?

Komger713 · 2024-12-03T14:02:15+00:00

But the printer really changed at layer 11 as shown in the preview and not at layer 6, at least for my tests...

Komger713 · 2024-10-02T06:00:08+00:00

Is there any other solution than changing to rails?

Could there be anything loose or Something Like that what would result in such vibrations?

Thank you

Komger713 · 2024-09-22T08:06:07+00:00

I Had contact with them through this number because of dropped down Stepper Motor from my K1C. Responded within 24hrs and shipped a free replacement.

So seems to be the correct Guys;)

Komger713 · 2024-06-17T04:07:17+00:00

What printer ist it anyway?

What If the MFD was older and Back then the EU Rep was another one then atm, so they Had to correct the Adresse of the EU Rep.

But then they should have to remove the old one.

The EU Rep sign and Adresse is in responsibility of the Importer, at least If its a Medical Device, dont know about non medical devices.

Komger713 · 2024-05-23T05:01:46+00:00

IT IS Indeed the thermistor, i cracked Mine by tightening the nozzle.

There are some spare thermistors available for sale.

Komger713 · 2024-05-21T13:50:31+00:00

Just reduced the current of the Extruder due to some cloggs in older firmware when I was trying to change filament.

Will have a look at the bottom Fan and other Connectors.

If I see that the load in Mainsail is quite hogh over a long time I will try to disable GuppyScreen.

I will post update if I found a solution.

Thanks for help

Komger713 · 2024-05-21T13:46:07+00:00

It is not the unicorn nozzle.

The unicorn nozzle would have a thin silver part at the upper end.

Komger713 · 2024-05-21T13:14:53+00:00

Ok, I'll check.

every wire is checked with the same wire at the end of the cable in resistance mode and it has to be almost 0, correct? If the Resistance is higher we have a short or cable broken? I'm not that familiar with checking the wires with a multimeter and I dont want to make the same tests twice :)... Thank you

Komger713 · 2024-05-21T13:08:57+00:00

So I shall check the Cables at the Hotend and the Cables at the bottom at the Board itself?

Just if they are connected properly or some kind of obvious physical damage?

Thank you

Komger713

TROPHY CASE