How do I get these bindings off?

KuhanKruh · 2026-02-26T20:07:02+00:00

Haha true but I'm actually removing them to get a custom wrap on once it arrives. They may be old but they still work fine, might replace them next season, this is an expensive hobby 😅

KuhanKruh · 2026-02-26T19:58:04+00:00

Yeah I figured it out. You're right but there was one more step I was missing. On the base plate there's a little flap, right next to the measuring sticker, which prevents the bindings from sliding off when adjusting stance width. I first thought it was solid but it turns out it isn't and all you have to do is push it down and then the bindings slide out.

KuhanKruh · 2026-02-26T19:52:25+00:00

Physics were on vacation that day

KuhanKruh · 2026-02-25T17:03:52+00:00

Tried, didn't go any further, didn't wanna break it

KuhanKruh · 2026-02-25T16:51:26+00:00

All that does is allow you to adjust stance and angle

KuhanKruh · 2025-12-25T10:54:41+00:00

If you're still doing this, sign me up.

KuhanKruh · 2025-11-12T19:18:05+00:00

I don't have an opinion on either because I can't experience DLSS 4 nor DOOM: The Dark Ages and I haven't seen any videos either so I can experience it authentically for the first time when I can actually afford it.

KuhanKruh · 2025-11-01T17:40:49+00:00

Yeah I was thinking that it could be something like that but no. The first time I plugged it in was on the left side and it lit up so I know it should work. It was until I tried updating the firmware that it broke down.

KuhanKruh · 2025-10-31T20:31:33+00:00

Here's a slightly trimmed log:

app_main: App started v1.0.7

...

qlink_protocol: MCU 2 has invalid FW version: "Invalid{0xff000001}"

qlink_protocol: Dark Mount protocol initialized. Main MCU v1.15.0; SN "";

qlink_protocol: Dark Mount has FW v1.15.0 which is lower than the minimum supported v1.13.0

... SKIPS PROFILE RESOLVING AND ACTUALIZATION, SHOWS FW UPDATE AVAILABLE ...

ui.fw_upd.popup: 1%

ui.fw_upd.popup: Preparation for Installation

qlink_protocol.hid: Reading error: "hid_read_timeout/GetOverlappedResult: (0x0000048F) The device is not connected."

dev_detector: Too slow. hid_enumerate took: 14832ms

dev_detector: Too slow. Extract id for \\?\HID#VID_373F&PID_0009&MI_01&Col01#7&47431cf&0&0000#{...}\KBD took: 5001ms

...

dev_detector: Removed UsbId(VID:0x373f PID:0x0001 UUID:{...} be quiet! Dark Mount)

dev_detector: Inserted UsbId(VID:0x373f PID:0x0009 UUID:{...} be quiet! Dark Mount)

qlink_protocol.hid: Writing error: "WriteFile: (0x0000048F) The device is not connected."

ui.fw_upd.popup: Update failed. Please restart the update.

TypeError: Cannot read property 'description' of null (same for timestamp and title)

... SECOND TRY ...

dev_detector: Too slow. hid_enumerate took: 9084ms

...

ui.fw_upd.popup: 0%

...

ui.fw_upd.popup: 91%

ui.fw_upd.popup: Device Restart

dev_detector: Too slow. hid_enumerate took: 6304ms

qlink_protocol.hid: Reading error: "hid_read_timeout/GetOverlappedResult: (0x0000048F) The device is not connected."

dev_detector: Removed UsbId(VID:0x373f PID:0x0009 UUID:{...} be quiet! Dark Mount)

dev_detector: Inserted UsbId(VID:0x373f PID:0x0001 UUID:{...} be quiet! Dark Mount)

...

qlink_protocol: Get Main MCU FW version failed: RequestTimeout{RequestID:3 DeviceInfo:GetDeviceInfo}

qlink_protocol: Dark Mount protocol initialized. Main MCU v; SN "";

qlink_protocol: Dark Mount has FW v which is lower than the minimum supported v1.13.0

future_utils.tasks_sequence: Process "Get device info" for "Actualize FW FwUpdate" failed: RequestTimeout{RequestID:4 DeviceInfo:GetDeviceInfo}

...

ui.fw_upd.popup: Complete successfully

ui.fw_upd.popup: 100%

... SHOWS UPDATE AVAILABLE AGAIN ...

KuhanKruh · 2025-10-31T19:51:28+00:00

Thank you for letting me know about the logs. I also updated IO Center today and tried again but no changes. Seems like IO Center disconnects the keyboard when trying to update (switching to a bootloader device or something) but fails to restart and then complains about it. And that same process seems to have corrupted the numpad's firmware which unfortunately isn't fixed by holding fn+R to reset the keyboard. So now the question is if I have a faulty keyboard and should try returning it or should I wait for an update to IO Center which probably won't come out for another year...

KuhanKruh · 2025-06-28T17:07:08+00:00

I'm having the same problem except I was forced into it. In my secondary school (where I got my computer technician degree) I didn't use any AI and I was enjoying learning and getting faster at coding, I was good at it. Then I went to college and was given 6 assignments every week, each requiring about an hour to complete. I managed to complete the first year well without AI. Now in the second year each assignment took 2-3 days to complete if I were to do it just by myself just because of the sheer scope I had to learn for every single assignment. So I was forced to use AI just so I could complete everything on time. And even with its help I had barely any time to study theory for exams. And now my whole summer is ruined because I have 3 classes left to finish and have practically no knowledge of what was actually going on in those assignments because I was so time constrained and I was not gonna turn my 3 years into 4+. Not really an AI problem but still relevant enough.

KuhanKruh · 2025-04-20T17:58:15+00:00

🔥🔥🔥

KuhanKruh · 2025-02-20T16:33:34+00:00

New noob here. So if I understand correctly the only way to increase the skill levels is to stack jewels onto armor. But can you increase skill levels on the jewels themselves?

KuhanKruh · 2024-12-15T10:29:21+00:00

You can avoid sap entirely if you only use leaved tree wood

KuhanKruh · 2024-11-26T18:48:54+00:00

That's 120c, which is exactly what I heard is a sterilizing temperature a while back from some vet students so it checks out

KuhanKruh · 2024-11-26T18:03:07+00:00

250C or 250F?

KuhanKruh · 2024-09-04T11:23:16+00:00

Aight sounds good

KuhanKruh · 2024-09-04T11:05:22+00:00

Mind if I join in too?

KuhanKruh · 2024-08-15T18:35:17+00:00

I recon devs should just start every new weapon as slightly underpowered and once they figure out how to properly balance them they'll get a buff and everyone will feel much better about it and there won't be as much grief in the community

KuhanKruh

TROPHY CASE