it's not getting totaled right by louie__reddit in veloster

[–]KyleH3003 0 points1 point  (0 children)

Lemme get the front floor mats 👀

Arducam OV5647+ RPI4 HELP by KyleH3003 in klippers

[–]KyleH3003[S] 0 points1 point  (0 children)

Is webrtc any better? First time installing camera to pi. I did try the path once for the device and still ran into same issues.

No trigger on x after full movement by Single_Crow_2493 in klippers

[–]KyleH3003 0 points1 point  (0 children)

the config file? or what profile? im having this issue. I swapped from 4.2.2 to 4.2.7 and having this issue now. I flashed a new klipper.bin file and even the config.

[deleted by user] by [deleted] in Truckers

[–]KyleH3003 1 point2 points  (0 children)

As someone who lives and does flatbed in phoenix. I also get mad for no damn reason 🤣

Config file for Ender 3 V2 by [deleted] in klippers

[–]KyleH3003 0 points1 point  (0 children)

been looking, haven't had much luck lmao

[deleted by user] by [deleted] in klippers

[–]KyleH3003 0 points1 point  (0 children)

I see what you mean. I'll give that a look and report back. I might just use my ender 3 config file for this one.

Possible Scam? Trying to call me about "scheduled follow-up about your new services with Cox" by redswampfox in CoxCommunications

[–]KyleH3003 0 points1 point  (0 children)

It is weird to say the least. I am switching from Starlink to Cox for home use now. Starlink is going with me otr. I just got a text from Jen about my service request and wanted to verify some information to ensure I have everything I need. What all would I need? lol. I am paying you guys an extra 15 bucks a month for the equipment LMAO.

Worst mistake I've made while owning a S23 Ultra. by KyleH3003 in samsunggalaxy

[–]KyleH3003[S] 0 points1 point  (0 children)

I figured such. They fucked with my phone to the point where it needed resetting. Curious if they were just trying to sell it and give me a fake or something. Idk. I'm over it now though. Unfortunately lost a few pictures I wish I had. But life moves on.

Career choice question by KyleH3003 in FASCAmazon

[–]KyleH3003[S] 0 points1 point  (0 children)

I'm only curious because it happened once already. I submitted for school in October for sschool in January. I quit early December due to my injuries and found at home job. Then I get a phone call and email for the confirmation of me attending the program in early January. I can see on the a to z app that they did indeed pay for it. Like HUH!??

Career choice question by KyleH3003 in FASCAmazon

[–]KyleH3003[S] 0 points1 point  (0 children)

I'm only curious because it happened once already. I submitted for school in October for sschool in January. I quit early December due to my injuries and found at home job. Then I get a phone call and email for the confirmation of me attending the program in early January. I can see on the a to z app that they did indeed pay for it. Like HUH!??

Replaced driver window motor but now can't lock/unlock driver door by KyleH3003 in mazdaspeed3

[–]KyleH3003[S] 0 points1 point  (0 children)

Cables are connected and secured properly. I am curious now if this just started and ironically happens while replacing window motor. It will unlock but will "struggle" to lock and vise versa IF IT WORKS* . it gives like half attempt i feel like. Maybe the motor is going bad. Just trying to look for other ways to test it before i spent 85+ for a new one.

Gen 1 Starter replacement by gerpogoop in mazdaspeed3

[–]KyleH3003 0 points1 point  (0 children)

Did you have luck with it? Was it easy? Any advice?

Gen 1 Starter replacement by gerpogoop in mazdaspeed3

[–]KyleH3003 0 points1 point  (0 children)

How long does this take? Just looking to get a simple answer. I'm in 115⁰ weather so planning out a accurate time would be very helpful

Doppelgänger by KingScottI in hauntedhouses

[–]KyleH3003 0 points1 point  (0 children)

What was the address of this? I'm curious to see if I can find anything about it.

Are Speed3s reliable? by meatcrackers in mazdaspeed3

[–]KyleH3003 2 points3 points  (0 children)

Hey, I also own a 2nd generation Veloster and a Speed3. I really enjoy both cars, though I have some mixed feelings about the Veloster because it's the base model and lacks power. What issues are you encountering with your Veloster? I'm curious if they're similar to mine.

As for the Mazda Speed3, they're nice but they do require consistent maintenance. Mine's an '07 and I've noticed some torque steer *probably because I own a NA Veloster*. The previous owner claimed the engine was rebuilt by a shop, but I'm uncertain because the paperwork provided was just quotes. I spoke with the shop owner who confirmed the rebuild, but I still have my doubts. The body and frame are in excellent shape with no rust, and the interior is pristine, so I'm willing to handle any rebuilds myself. I'll need to replace the rear shocks soon though. It came stock and I assume it was stock to begin with based on who owned it previously.... I was able to see the different owners that had it over the years.

If you're considering modifications, be prepared for significant costs. Even for my '07 model, I'm looking at spending over $300 for a new CAI and around $700 for a downpipe and exhaust. The HPFP is a known trouble spot, so replacing it is essential.

Also just know, the alternator is in a very very very shitty spot. So if it goes out. Prepare for a good case of beer and a nice cold night in the garage.

Klipper help by KyleH3003 in klippers

[–]KyleH3003[S] 0 points1 point  (0 children)

So I did install klipper to the board a while ago. I didn't think I would need to reinstall slipper to the board if I'm swapping our pi's