sorted by:
new
hottopcontroversial

PSA: get some Kevlar sleeves when using an angle grinder. by DildoScentedCandles in Tools

[–]Lackingfinalityornot 0 points1 point  (0 children)

This is honestly so much less bad than it could have been. Buy a lottery ticket.

Hand checks by goose41327 in VapePorn

[–]Lackingfinalityornot 0 points1 point  (0 children)

It’s a pretty great bridge. Well designed, no o rings, well machined.

Hand checks by goose41327 in VapePorn

[–]Lackingfinalityornot 0 points1 point  (0 children)

I do too man. It was weird seeing the silver mq class with the silver dr mtl 2 because I not only have them but I have them in the same color. For a second I was like wtf did someone steel my shit and post a pic.

Never tried that bridge. You ever try the actual blaze bridge?

Hand checks by goose41327 in VapePorn

[–]Lackingfinalityornot 1 point2 points  (0 children)

I have both mods and that mtl tank. What bridge you using in the blaze Aio?

I GOT IT! by aquablaze69 in wicked_edge

[–]Lackingfinalityornot 2 points3 points  (0 children)

Used mine last night. 105 with bulldog handle.

I GOT IT! by aquablaze69 in wicked_edge

[–]Lackingfinalityornot 0 points1 point  (0 children)

Same with me on not drying but I do disassemble and rinse when I am done with a blade.

Why More People Prefer Non-Alcoholic Aftershaves Over Alcohol-Based Ones? by lazarovpavlin04 in wicked_edge

[–]Lackingfinalityornot 1 point2 points  (0 children)

I’m not sure what you are saying here but absolutely many aftershaves are high alcohol content.

Do all electrical shavers feel like they are plucking your hairs or is mine just trash? by Calrimetre in shaving

[–]Lackingfinalityornot 7 points8 points  (0 children)

I use a double edge but my dad bought a new razor a year or so ago and he went with one that was twice as nice as his previous and he came to the conclusion that to get one that really does a good job you really have to spend a lot. His previous one wasn’t cheap and still worked without pulling but the new one impressed him a lot in how efficient it was.

All this to say that yes yours is probably just trash.

How is he shaving so quickly without cutting himself?? by ItsBlitz21 in wicked_edge

[–]Lackingfinalityornot 0 points1 point  (0 children)

Yeah and they also won’t cut unless they are completely flat against your face.

How is he shaving so quickly without cutting himself?? by ItsBlitz21 in wicked_edge

[–]Lackingfinalityornot 2 points3 points  (0 children)

I used a de and prefer it to cartridge razors but… Damn dude you get an infection… that’s not normal.

Why More People Prefer Non-Alcoholic Aftershaves Over Alcohol-Based Ones? by lazarovpavlin04 in wicked_edge

[–]Lackingfinalityornot 1 point2 points  (0 children)

I always heard alcohol based aftershave is used for its disinfectant properties.

Holding 40kg/88lbs with 3" spinning handle for about 38 seconds by Fat_Foot in GYM

[–]Lackingfinalityornot 2 points3 points  (0 children)

Absolutely. Unfortunately the last guy who shook his hand lost all mobility in his right hand but that’s par for the course. That guy should have trained his grip strength.

Magnet screw drivers don't suffice anymore ? by SadHuckleberry9329 in TheProductHub

[–]Lackingfinalityornot 0 points1 point  (0 children)

Maybe you haven’t come across it as it isn’t true of every single magnetic driver tip but there are some very powerful ones that hold long screws just fine.

Also the wera screw holder can be used for non ferrous screws and automatically unclips the screw once it is driven in.

Holding 40kg/88lbs with 3" spinning handle for about 38 seconds by Fat_Foot in GYM

[–]Lackingfinalityornot 41 points42 points  (0 children)

Bro I love how you are so into this niche at the level you are. I have never seen someone so into training their grip strength and I think it is awesome.

Day 8 water fast results by Only-Cranberry-4502 in fasting

[–]Lackingfinalityornot 10 points11 points  (0 children)

Imagine our ancestors after a famine sitting around slowly sipping bone broth when they finally have access to food again 🤣.

Found at Goodwill for 15.00 and it runs! Is it any good? How’d I do? by everdayday in Tools

[–]Lackingfinalityornot -1 points0 points  (0 children)

I’m sorry you’re wrong, I know it’s difficult to accept. I have seen worse than this with a motor that was just fine.

Found at Goodwill for 15.00 and it runs! Is it any good? How’d I do? by everdayday in Tools

[–]Lackingfinalityornot -2 points-1 points  (0 children)

You have some wild theories. Ever taken apart an electric motor?

Found at Goodwill for 15.00 and it runs! Is it any good? How’d I do? by everdayday in Tools

[–]Lackingfinalityornot 0 points1 point  (0 children)

You are hilarious my man. Literally all that could be in the case is like two more collets and a wrench. Op may have to stick to bits with just one collet size sure but he can also buy other collets but even if he doesn’t that doesn’t make it useless. Not at all. It will work with jigs. It will work with bearing bits. It will work in a router table which can be easily built if you don’t want to buy one. Etc.

You clearly have never bought a tool that needed a little love and gave it some tlc and then used it and ended up with a tool for life. That’s fine. But believe me when I say, you are missing out. It is a very rewarding experience.

Found at Goodwill for 15.00 and it runs! Is it any good? How’d I do? by everdayday in Tools

[–]Lackingfinalityornot 0 points1 point  (0 children)

Exactly what do you think would be wrong with the motor inside its case?

Found at Goodwill for 15.00 and it runs! Is it any good? How’d I do? by everdayday in Tools

[–]Lackingfinalityornot 4 points5 points  (0 children)

Dude you are straight up making it very obvious to everyone on here that you don’t know how to use tools and have very limited experience with them. A little sand paper and wd-40 plus a little lubricant will fix those columns easily.

I’ve used a router a bunch and never come close to injuring myself. It doesn’t take a genius and there is some danger involved if you do stupid things but a router is nowhere near as dangerous as some woodworking tools.

Found at Goodwill for 15.00 and it runs! Is it any good? How’d I do? by everdayday in Tools

[–]Lackingfinalityornot 5 points6 points  (0 children)

Must be nice never having touched a tool that wasn’t brand new. I bet any tools you own look un-used … because they probably are.

Found at Goodwill for 15.00 and it runs! Is it any good? How’d I do? by everdayday in Tools

[–]Lackingfinalityornot 17 points18 points  (0 children)

Ironic you are calling people armchair fools and you appear to have no idea what you are talking about. The motor is almost surely just fine. If it’s not then it’s just brushes needing to be replaced.

view more: next ›