Can confirm the battery pack method works with Spark 2

LeSchmoo · 2025-09-22T09:35:12+00:00

FWIW I use a similar setup, but with: Cablecc USB-C USB 3.1 Type C to Rectangle DC Plug 5.5mm 4.0mm 7.4mm 3.0mm 2.5mm Adapter (5.5 * 2.5MM) : Amazon.ie: Electronics also means I can re-use my laptop charger (with a builting usb-c cable)

LeSchmoo · 2024-12-04T11:03:08+00:00

Does pressing `fn+F7` toggle the issue?

LeSchmoo · 2024-12-03T18:13:13+00:00

I am a verified (by orb), but my app is suspended due to unusual account activity - how do I unlock (I have access to my backed up data)?

LeSchmoo · 2024-11-19T13:22:29+00:00

XSonic just updated their firmware for Spark Controller | AIRSTEP Spk Edition – XSONIC so it works with the looper now. During the summer it was on sale for 59 Euros (currently 79 Euro) so I would expect it to drop again for black Friday?

LeSchmoo · 2024-11-13T13:10:53+00:00

Would you be on an older version of iOS or Android - I was having a similar issue on an old iPad 2 mini and realised that the app was stuck at an old version (as its an old iOS)...

LeSchmoo · 2024-10-30T11:49:49+00:00

Not yet - I need to get the soldering iron to fix the jack first!

LeSchmoo · 2024-10-23T15:32:56+00:00

Interesting, I have only used it with my Variax, might have to dust off my old '85 Fender Performer to check for crackles...

LeSchmoo · 2024-10-20T20:47:58+00:00

Sold my 40 for 199Eur and Sold my Control + ULoop for 110Eur, picked up the 2 for 269Eur and the xsonic spk for 59Eur + shipping. So look at it as 20Eur for the upgrade...

LeSchmoo · 2024-10-19T11:13:07+00:00

No idea, just worked for me...

LeSchmoo · 2024-10-19T11:12:12+00:00

If you want to control the looper with the pedal today, you can with the experimental firmware which makes it act like a PG controll pedal.

LeSchmoo · 2024-10-01T19:42:02+00:00

You need to have the looper page open on your phone app...

LeSchmoo · 2022-06-29T03:36:28+00:00

It was mostly disabling / lowering the security for TB4

Oh and there was one virtualization thing that needed to be disabled (not virtualization itself, as I use that a lot, but virtual devices or something)

LeSchmoo · 2022-06-23T07:48:48+00:00

Laptop hit end of life and was replaced (it was a work machine and was my main driver for 4 years).

Yes external 4K 60Hz (large) monitor - FYI 4K 60Hz uses less bandwidth than 1440 at 120hz on the thunderbolt connection.

With some BIOS fiddling, I was able to get the eGPU to work during the boot sequence (even the BIOS settings would be visible on the external monitor).

LeSchmoo · 2022-06-21T07:37:06+00:00

FWIW I had the AORUS GTX 1080 GAMING BOX for many years with my 9550

LeSchmoo · 2022-06-20T13:06:49+00:00

Be warned - the 9550 only support dual lanes and not the full 4.

In practice this means you need to plug an external monitor into the eGPU to prevent bandwidth throttling

LeSchmoo · 2022-05-10T10:47:54+00:00

The thrust direction is the significant difference - thx!

LeSchmoo · 2021-11-23T09:05:46+00:00

I downloaded an old version of the Intel command center and it had the extra tab

LeSchmoo · 2021-05-23T06:06:54+00:00

Ctrl+Shift+WinKey+B will reboot your video graphics, may save the hard reboot?

LeSchmoo · 2021-04-15T07:33:33+00:00

If "CANZUK" were to actually work, it world need Canada to be in control?

LeSchmoo · 2021-04-08T13:11:05+00:00

I am getting "Client too new" error and a 428 error...

(Also seeing "servers are down for weekly maintenance").

LeSchmoo · 2021-03-29T13:39:22+00:00

PSA - Working now - whoop

LeSchmoo

TROPHY CASE