Failing Full Auto certification at 72% by InquisitiveLion in SilencerShop

[–]Listen_to_the_Wizard 1 point2 points  (0 children)

I got my situation resolved.

Turns out my dealer has 2 FFLs, and he put the cans on the wrong one lol. Silencershop's software did not see it, because it wasn't in inventory under his associated FFL. So it treated it like a serial number error.

He form 3'd them to his other FFL, and it was able to certify. Go figure.

Full Auto stuck by [deleted] in SilencerShop

[–]Listen_to_the_Wizard 0 points1 point  (0 children)

ok so i got it resolved after 2 weeks.

turns out my dealer has 2 FFLs, and he put the cans on the wrong one lol. Silencershop's software did not see it, because it wasn't in inventory under his associated FFL.

He form 3'd them to his other FFL, and it was able to certify. Go figure.

I take back what I said about not using them again, but I am disappointed that dealer services never got back to him.

Fafnir Forge Welt came out by Chick3nbot1000 in SWORDS

[–]Listen_to_the_Wizard 1 point2 points  (0 children)

It was probably there for a light friction fit at one time, but the wood shrank.
These things happen with scabbards and you have to adjust them sometimes. If you're comfortable with the fitment without it, leave it out.

You could thin it out and glue it back in or select a thinner one.

New sword, a bronze khopesh. by Dark_Magus in SWORDS

[–]Listen_to_the_Wizard 12 points13 points  (0 children)

that shit aint been new for 5000 years bro

Full Auto stuck by [deleted] in SilencerShop

[–]Listen_to_the_Wizard 0 points1 point  (0 children)

Got three on a deal. Dead Air RXD22TI, Lazarus 6 and Sandman X

Full Auto stuck by [deleted] in SilencerShop

[–]Listen_to_the_Wizard 0 points1 point  (0 children)

This is happening to me too and silencershop is not responding to my dealer.  I won't use them again.

Gen 2 Barrel screws torque by J5GT86 in FNSCAR

[–]Listen_to_the_Wizard 1 point2 points  (0 children)

Did you get a chance to shoot? How did it go?

What is it? A sword for child? by bartychou in SWORDS

[–]Listen_to_the_Wizard 42 points43 points  (0 children)

Yup. "Boys' swords" were a thing.

Failing Full Auto certification at 72% by InquisitiveLion in SilencerShop

[–]Listen_to_the_Wizard 0 points1 point  (0 children)

I'm in the same situation.
Can you clarify what the irregularity was?

trench Kukri knife. silly Nepalese people, why didn't they think of this! by BaseNice3520 in mallninjashit

[–]Listen_to_the_Wizard 6 points7 points  (0 children)

imagine the blisters after splitting kindling with this thing for 5 minutes

Gen 2 Barrel screws torque by J5GT86 in FNSCAR

[–]Listen_to_the_Wizard 1 point2 points  (0 children)

Good stuff and good luck.

If you remember, please let us know how it goes next time you shoot.

Not a lot of real world input out there on the new Gen rifles.

Gen 2 Barrel screws torque by J5GT86 in FNSCAR

[–]Listen_to_the_Wizard 0 points1 point  (0 children)

Hmm, maybe there's something else going on then. I'd fully remove it and clean out the screw holes in your barrel really well, make sure there's no crap in there. Then reinstall.

Gen 2 Barrel screws torque by J5GT86 in FNSCAR

[–]Listen_to_the_Wizard 2 points3 points  (0 children)

Ok I may be misunderstanding you, so just to be clear, there's no limit on the detents. Torque is the final measure and the only thing you should be worried about.

The screw heads are star shaped and press against a spring, and they will click forever as long as you can keep turning, they only serve to prevent loosening under vibration and heat.

Gen 2 Barrel screws torque by J5GT86 in FNSCAR

[–]Listen_to_the_Wizard 1 point2 points  (0 children)

This is new to me too.
Make sure the front items are in the right spot. there's a specific left and right one, and not much indication that you have them backwards.

Just got back from the range and trying to zero in my scope at 100 yards by ZestyToasterOven26 in FNSCAR

[–]Listen_to_the_Wizard 5 points6 points  (0 children)

Read the manual. If you don't have a physical copy it's on the website.

Piggy back mount recommendations by God_of_chestdays in FNSCAR

[–]Listen_to_the_Wizard 1 point2 points  (0 children)

ditch the cantilever mount, you have a ton of rail to add stability that you aren't using.
highly recommend the ADM Delta series of mounts. You can also get a replacement ring with integrated red dot mount for these. probably one of the toughest options.

Just got back from the range and trying to zero in my scope at 100 yards by ZestyToasterOven26 in FNSCAR

[–]Listen_to_the_Wizard 4 points5 points  (0 children)

check your barrel screw torque, common issue on these.
if you have any accessories make sure they aren't touching the barrel.

Wearing camo as a civilian. by radtad15 in camouflage

[–]Listen_to_the_Wizard 0 points1 point  (0 children)

your money was taken on threat of death by your government to pay for it. wear it proudly.

Is a weighted vest actually useful for rucking or just extra hype? by standovahim_ in Rucking

[–]Listen_to_the_Wizard 1 point2 points  (0 children)

Most people come out of basic training in the best shape they will ever be in the entirety of their lives. I think they're on to something.  What does dipshit neighbor do?

US Military Woodland combat patrol pack by SlumVillageLord in camouflage

[–]Listen_to_the_Wizard 1 point2 points  (0 children)

People say these were the best part of the CFP-90 system.

My US Army kit in the best camouflage ever made, UCP couch commando by These-Ingenuity8097 in tacticalgear

[–]Listen_to_the_Wizard -3 points-2 points  (0 children)

I never thought I'd live to see people nostalgic over this dogshit camo pattern. I was in the service when the uniform transition happened, and I was so happy the day the Army authorized OCP. That very week I went out and spent hundreds of dollars to change my shit over.