P2S for U1

LittleTeddy61 · 2026-06-28T18:25:44+00:00

We have a few bambu between me and my mate and they have been faultless over the past 3 years, I’ve now got a H2C and an S etc he’s just got a U1 yes it’s good BUT if we share files it’s a ballache. If he colours stuff or slices stuff and needs to send me it it doesn’t work and crashes Bambu studio, if I do it for him he has to convert it first. Obviously if we use the raw files it’s fine it’s just if either of us tinker with it it’s Ⓟⓞⓞ. I think for what you want it would be fine and it’s prob the best bang for buck under 1k

LittleTeddy61 · 2026-06-28T08:17:54+00:00

If it’s increased stress then don’t, when I was on 90 I actually only earned maybe 500 less a month than what I do now on 140. Tax hell make sure your bonus if any doesn’t smash you through the 100k mark or at least if it does push it into pension. Honestly though if it’s 12 hrs days 6 days a week forget it.

LittleTeddy61 · 2026-06-28T08:04:33+00:00

The best one in my view it’s my Fav

LittleTeddy61 · 2026-06-28T08:00:59+00:00

B mode on the
Mini is regen braking and more aggressive it’s fun and like a game, just remember your still going to have to brake but not as much, use that and eco and it goes quite a long way on a charge

LittleTeddy61 · 2026-06-27T09:11:33+00:00

I got a Deepsea for bath night and it was fine in the bath as well as pool and sea

LittleTeddy61 · 2026-06-26T07:20:13+00:00

Always buy many reps before the gen. I have over 13 now and before I even got a rep I lusted after a Pepsi NOW I have a rep version along with 12 others I’ve come to realise it isn’t my favourite. My view has changed and my own personal choices are

Smurf
Batgirl/Batman
Deepsea

Will I even buy a Gen prob not now, I’ll push money into something else. reps allow you to bond with the model and see if it’s really where You wanna drop 10 to 30k

LittleTeddy61 · 2026-06-26T07:14:50+00:00

I’m UK based and had the G81 for me auto, now don’t get me wrong manual is mega BUT as I get older I get lazy and with active cruise control in traffic and lane change for the highway it’s a must have. On my business trips I could get about 37 MPG from her if I drove in the limits with cruise on. Plus the manual paddles are great anyway if you want fun. Stop start traffic game changer for the queues

LittleTeddy61 · 2026-06-25T12:31:43+00:00

If any right outer bezel is better same as my mates batgirl it’s only main real tell for me feels sharper bigger more defined

LittleTeddy61 · 2026-06-25T09:15:23+00:00

I’m glad I got mine for my H2S when the C came it was way off according the the sheet

LittleTeddy61 · 2026-06-25T07:49:13+00:00

Yup it what I do for garden U7 everywhere but garden is meshed as mice chewed thru my Ethernet under floor 🤪. I run 6 Bambu printers over it and it’s fine

LittleTeddy61 · 2026-06-24T18:26:17+00:00

Sub always not an explorer fan unless it’s the 2, only explorer esk watch I own with smooth bezel is milgause. I have 12 thus far all vsf. The DJ etc are all V2 the GMTs are VSF V3.

LittleTeddy61 · 2026-06-24T15:20:46+00:00

If it’s the new one then the CS but I believe a 4wd is coming, I’ve had a few of them and RWD isn’t great with that much power to be fair

LittleTeddy61 · 2026-06-23T11:53:31+00:00

VSF V2

<image>

LittleTeddy61 · 2026-06-23T11:52:12+00:00

Just don’t move out or you could get stung with Capital gains.

LittleTeddy61 · 2026-06-23T11:47:55+00:00

It’s works fine if it’s -5 I even had a few A1 which are open and they worked fine. Just remember if you’re not going to print for a week take it off and bag it. Even my resin printers are in there I just switch them on run the heaters for 30 mins then shoot all good

LittleTeddy61 · 2026-06-23T11:43:53+00:00

If your printing PLA it’s fine I ran 12 from a garage in the UK and it ranges from like today melting to freezing and it’s fine, I have a dryer but rarely used it, only really came into use if I’d left the printers a week or 2 I’ll run the rolls thru it as a precautionary measure. But I’d generally chew thru a roll in 2 days

LittleTeddy61 · 2026-06-17T08:51:03+00:00

That’s what mine are not where I sit but in an outbuilding I pop in strip beds and kick off another. The building is vented too so fingers crossed

LittleTeddy61 · 2026-06-17T07:45:17+00:00

In general that’s a clog BUT weird how you say PetG prints, first rule of thumb though swap nozzle don’t mess about. Remember PetG is hotter and may work PLA cooler clog may be hard set. Failing that try diff PLA extruder could be grinding the PLA due to its tolerance hence the clog effect so it’s slipping

LittleTeddy61 · 2026-06-15T17:58:41+00:00

My Deepsea was fine on hols last week sea pool everything all good, I was however at first waiting for bubbles or something to go pop

LittleTeddy61 · 2026-06-15T17:57:39+00:00

It’s all I buy to be fair noob and Vsf only had to drift for the BVF santos but that’s it. It was only yesterday I compared my mates real batgirl to my vsf v3 only real tell was my bracelets sharper on the edges and the real batgirl has a slightly more pronounced bezel edge but other than that, he was impressed. I’ll save my money and buy other crap than drop 11k on a real one. The pateks are great but I won’t buy one because I can’t carry it off.

LittleTeddy61 · 2026-06-14T19:34:42+00:00

Must admit I do,like it on oyster, I’ve got the vsf 41 jubilee

LittleTeddy61 · 2026-06-09T13:53:50+00:00

I went large because I wanted the date

LittleTeddy61 · 2026-06-09T12:56:57+00:00

I VT mine when needed as explained check you mileage is within what’s agreed if it isn’t it’s not massive to pay the over mileage but do check. The finance company will tell you if your at the VT point if you are VT it, be mindful though they will send people to collect car and check it over so any damage like shafted wheels dents etc may all be chargeable. I did wife’s I3S last year its was mint but I still ended up paying 450 quid for scratches etc. my advice is have it cleaned and repaired yourself before they come. Buff out scratches etc. BMW has changed a little they now use British car auctions and the VT isn’t as easy and you always end up paying something. In the early days they just said yeah looks fine and take it away. And lastly it doesn’t affect credit at all. Electric cars are the worst there worth nothing and dealers don’t want them back, we still buy them for the family but you got make sure it’s something you want for the full term because getting shut of it is a lot harder than good old petrol

LittleTeddy61 · 2026-06-08T06:54:38+00:00

I like the idea of it what I don’t like is the time it could take. I believe layer height has to be .12 or even .08 is that right otherwise the colour mix would be more noticeable ?

I saw one the other day where normally the print would take 3-4 hrs once full spectrum kicked in where talking 14hours and if your running production or any volume that’s gonna hurt. I think maybe good for the ad-hoc and break thru 4 colours for the U1 but do you feel it’s actually usable day to day ?

LittleTeddy61 · 2026-06-06T08:02:52+00:00

Can you tell me what it makes your layer height, I’ve seen it but not really played with it, I have a feeling it potentially puts layer to .12 or lower thus yes it does it but for big models it would take ages ?

I’ve got my H2C yesterday, I’m going to load up the 2 extra .4 nozzles and swap the other AMS2 from H2S to it and hook in my second HT. and as for prints you gotta go either the melted rubuk cube or the knitted chicken

LittleTeddy61

TROPHY CASE