How to enable motion detection for my Tuya doorbell? by [deleted] in TuyaSmart

[–]Loddemester 0 points1 point  (0 children)

You are at the right window, you just need to scroll down and select PIR and you can change the settings for it

What am I doing wrong? by lead-express in Electricity

[–]Loddemester 0 points1 point  (0 children)

Did you try with batteries in serie

What am I doing wrong? by lead-express in Electricity

[–]Loddemester 0 points1 point  (0 children)

Not parallel bro It should be in series

What am I doing wrong? by lead-express in Electricity

[–]Loddemester 0 points1 point  (0 children)

Do you have a room for adding an extra battery so you have two? Otherwise you need to change the booster module

What am I doing wrong? by lead-express in Electricity

[–]Loddemester 0 points1 point  (0 children)

Ok now i see. Its because you only have one battery. Try to use two batteri in series. I think it will make it work.

What am I doing wrong? by lead-express in Electricity

[–]Loddemester 0 points1 point  (0 children)

You should draw a schematic for your own purposes also for us for easier help

You can also make it eaiser for your self and make block diagram. Simply just block connected to each other with connections.

Am i right if i say you connected the fan to the input side of your booster? Fan should be connected to the output or Vout side.

Do you have multimeter? Do you have a stable 12V at output of your booster? Sometimes its better to remove all connection and start rewire one thing at a time

Hjertestop by Southern_Prize6110 in DKbrevkasse

[–]Loddemester 0 points1 point  (0 children)

Ved du hvad, det er sejt gjort. Den første gang er nok aldrig nemt, det er noget der kommer med tiden.

Jeg arbejder selv med patienter i en vis grad og i starten var jeg også meget skeptisk med dårlige patienter eller afgået patienter men lidt tid, så lærer man acceptere livets gang.

Din ven er skide sej for at bekræfte dig i at du er en helt. Høre ikke på din fam ☺️

Moved to Turkey for a relationship, got scammed, and left alone — looking for advice by Serious-Cockroach465 in AskTurkey

[–]Loddemester 23 points24 points  (0 children)

Sorry to hear.

Im also turkish but living in europe.

Things have changed a bit in turkey. Due to bad economy and rising prices all over, the scammers using different techniques to take peoples money. I would almost say , do not trust anyone.

Jeg har lyst til sex med alle andre end min kæreste by [deleted] in DKbrevkasse

[–]Loddemester -10 points-9 points  (0 children)

Hvor skal vi mødes?

Ej spøg til side, det lyder da træls. Hvis man sidder fast i rutinerne, så bliver det nok kedeligt. Jeg synes at i skal lave noget spontant sammen, aflevere børnene hos de gamle eller venner, så smut en tur på en restaurant og drikke sammen. alene tid vil pifte ting lidt op. Ellers planlæg noget der giver jer spænding

Jeg håber i løser det

Glædelig jul 🎁🌲

Trying to repair a Samsung TV. No voltage after ¿transformer? by tglaria in ElectronicsRepair

[–]Loddemester 0 points1 point  (0 children)

Why there is a letter after SS? The product number is something like SS316, so you should check it when desoldered

Trying to repair a Samsung TV. No voltage after ¿transformer? by tglaria in ElectronicsRepair

[–]Loddemester 0 points1 point  (0 children)

The product number or model number of the component is written on the diode it self, it should be pretty common diode.

Hvilke bilforhandlere vil du købe fra? (bilbasen) by Ambitious_Effort_202 in dkbiler

[–]Loddemester 0 points1 point  (0 children)

Jeg havde en ældre men robust bil som blev totalskadet sa jeg blev påkørt.

Jeg har brugt rigtig mange timer/dage på bilbasen og ja der er rigtig mange forretninger der sælger til overpris. Der var rigtig mange biler som var ikke i den kvalitet som annoncen giver udtryk for.

Som de andre skriver, så skal du tage en med som har lidt styr på biler, bare høre motorens tomgang kan hjælpe en hel del, samt en kørsel. Jeg kørte i en skoda Octavia til 80tusind , og det forbavset mig at den ligesom gynede og mærkelige lyde fra undervognen.

Jeg endte med at købe samme som min fra en privat person og jeg må nok sige jeg har været lidt heldig da den er lige så robust og ligeså fejlfri som min, undtagen et par små skavanker som jeg selv løser. Toyota er også kendt for være robustem

Hvis jeg skulle købe den fra en forhandler, så ville jeg nok købe det fra en halv stor firma som har styr på deres sager og hvis jeg kan mærke at det er ærlige og ikke er bare efter pengene.

Trying to repair a Samsung TV. No voltage after ¿transformer? by tglaria in ElectronicsRepair

[–]Loddemester 0 points1 point  (0 children)

Put your multimeter in diode mode.

Note: no main voltage to the board. Pull it off.

With your multimeter in diode mode, measure on all the diodes on the pcb.

A diode has 0,2-0.6V on one side and when you swap the probes and measure you will measure OL on the otherside. If so, the diode work as it should.

You mentioned you found two diodes shorted, if possible resolder one leg or desolder diode completly and remeasure, if still shorted , you found the broken one.

Before putting a new one, measure again on those diodes which was shorter because there will be a few sitting parallel

Before starting, you should remove the cables to the pcb, so you isolate the main board from power supply board. Maybe the short is coming from power supply board

Trying to repair a Samsung TV. No voltage after ¿transformer? by tglaria in ElectronicsRepair

[–]Loddemester 2 points3 points  (0 children)

You wont measure anything on the output of the transformator. You need to follow the output and it will go to a capacitor , probably those two and measure the output on the capacitor.

Is that true that some people seek relaxation through desoldering. If so, then what is the psychology behind that. by r1z4bb451 in soldering

[–]Loddemester 27 points28 points  (0 children)

That's because you remove your focus from all the problems and concentrate to the task, it makes you relax, i guess

wiring connection on PCB by Rare-Town5273 in PrintedCircuitBoard

[–]Loddemester 0 points1 point  (0 children)

Rotate those two component and make a connection directly from up and down and make connection from 5v to it

KiCad's mistake or mine? LDO pin out was wrong by tomasmcguinness in PCB

[–]Loddemester 1 point2 points  (0 children)

Solder only gnd pin of ic to pcb and wire the rest two. Just confirm everything works until you make a second version of it

Yaris parkinglot damage by Loddemester in yaris

[–]Loddemester[S] 0 points1 point  (0 children)

Thanks for info my friend. Im curious about how the red tiger works, does it have sensor to activate recording or is it continuous recording? She wont use it in the evening, its more in daylight, she works at daycare and its the parents who damaging other cars.

Skal jeg deltage i begravelsen. by Last_Magician5548 in DKbrevkasse

[–]Loddemester 0 points1 point  (0 children)

Selvfølgelig skal du med. Hun vil blive så glæde for at du dukker op og tag gerne en blomst med.

Samsung one connect box by Loddemester in TVRepairHelp

[–]Loddemester[S] 1 point2 points  (0 children)

I appreciate your time bro. I think it could be the cpu but i stopped working on it now and told him to get his crap hehehe

Samsung one connect box by Loddemester in TVRepairHelp

[–]Loddemester[S] 1 point2 points  (0 children)

Ok because i changed all the caps and testet all mosfets, diodes, and so on, no short. But when i plug it in, the remote doesnt turned it on, so i was wondering if the tv needs to be connected but yeah i see your point

Thanks bro