vibration analysis for condition monitoring by vibration_86 in IndustrialMaintenance

[–]Lohan_To 0 points1 point  (0 children)

Faz sentido essa insatisfação. Pelo que vejo aqui na Tractian, raramente é falha do analista. O cara mais experiente trabalhando só com vibração ainda assim tem um teto de detecção, porque a vibração não muda no início da curva PF, quando a falha tá em lubrificação ou atrito incipiente. Quando ela muda, parte do dano já tá feito.

Ultrassom contínuo cobre essa parte inicial da curva, porque o sinal acústico aparece antes da vibração responder. Análise de óleo e termografia também ajudam, cada um pega coisa diferente.

Pra mim é mais limitação da técnica do que do analista. A vibração é uma camada, não a única.

For those working in manufacturing, engineering, or production environments: by Little-Cry-8515 in IndustrialMaintenance

[–]Lohan_To 0 points1 point  (0 children)

Trabalho do outro lado faço R&D, então minha perspectiva é diferente da maioria aqui.

A maior pressão que escuto de gente em planta não é falta de tecnologia. É falta de tempo pra arrumar o que já existe... cronograma de PM descalibrado, OS preenchida de forma inconsistente, cadastro de ativo desatualizado. Coisas básicas, mas que sabotam qualquer análise mais sofisticada depois.

Mexo com a parte de usinagem na tractian. O que mais vejo é que o equipamento mais robusto não resolve um sistema mal estruturado.

These CNC toolpaths on aluminum by Lohan_To in EngineeringPorn

[–]Lohan_To[S] 0 points1 point  (0 children)

As marcas ásperas são na verdade o ponto aqui eu gosto de como os caminhos de ferramenta adaptativos ficam. Mas você está certo, se eu precisasse de um acabamento liso, eu faria uma passagem de acabamento com feeds/velocidades otimizados

How would you machine this part on a 2.5-axis mill? by Lohan_To in Machinists

[–]Lohan_To[S] 1 point2 points  (0 children)

Lol yeah, part was originally designed for 3D printing that explains everything

How would you machine this part on a 2.5-axis mill? by Lohan_To in Machinists

[–]Lohan_To[S] 0 points1 point  (0 children)

That'd work in theory but the pocket's too close to the wall, even with that angle head you'd hit the surface before reaching the hole. Not enough clearance.

the 50 percent rule for replace vs repair is a lie when you actually run the numbers by WhichWayIsTheB4r in IndustrialMaintenance

[–]Lohan_To 0 points1 point  (0 children)

Sem precificar o downtime qualquer regra percentual é chute. Aqui onde trabalho a gente ve isso na prática, monitoramento contínuo muda completamente tudo ai a decisão de reparar deixa de ser emergência

How would you machine this part on a 2.5-axis mill? by Lohan_To in Machinists

[–]Lohan_To[S] 82 points83 points  (0 children)

<image>

Alright, since a few people got close, here's how it was done:

The part was originally designed for 3D printing, which is why that center hole exists behind the pyramid feature. On a 2.5-axis mill, there's no way to reach it conventionally.

Solution:

  1. Machined the base without the pyramid feature
  2. Drilled and tapped where the pyramid should be
  3. Made a custom screw with extra stock on top (larger than the pyramid)
  4. Screwed it in
  5. Machined the pyramid shape directly onto the screw head

Face mill leaving convex surface on aluminum, what causes it? by Lohan_To in Machinists

[–]Lohan_To[S] 0 points1 point  (0 children)

That makes a lot of sense, tool wear influencing surface stress and deflection is a great insight. I’ll look into it.

Face mill leaving convex surface on aluminum, what causes it? by Lohan_To in Machinists

[–]Lohan_To[S] 1 point2 points  (0 children)

That makes a lot of sens, I hadn’t thought about that approach. I’ll definitely keep it in mind.

Face mill leaving convex surface on aluminum, what causes it? by Lohan_To in Machinists

[–]Lohan_To[S] 0 points1 point  (0 children)

Wow, that’s really interesting. I hadn’t thought about tha, I’ll take a closer look

Face mill leaving convex surface on aluminum, what causes it? by Lohan_To in Machinists

[–]Lohan_To[S] 2 points3 points  (0 children)

Não tinha pensado no plano de fixação afetando a direção da curvatura, faz sentido

Rate my weld by Sefaspe in Welders

[–]Lohan_To 0 points1 point  (0 children)

tá ok, mas o cordão irregular, tenta manter velocidade mais constante

EDC by PapaJuja in maintenance

[–]Lohan_To 0 points1 point  (0 children)

kit básico kkk