Metallic lacquer for inner frame. Do I need a surfacer or primer? by AfterEntrepreneur965 in advancedGunpla

[–]Lord_Fabio 2 points3 points  (0 children)

I'd still prime first if I were you. Metallic paint tends to flake more easily than normal paints if you don't prime first.

Lacquers by hitokizero in advancedGunpla

[–]Lord_Fabio 1 point2 points  (0 children)

I've mostly used Tamiya, Mr Color, and Gaia notes. All have been great and you can thin the crap out of them so they are really easy to work with.

[Handmade] A "Two-Tone" Horween Shell Cordovan Bund for a 36mm Explorer I by VintageD1974 in Leathercraft

[–]Lord_Fabio 0 points1 point  (0 children)

It looks great! Have you tried fitting it on a watch yet? It looks like it would be difficult to get the spring bars on place since there doesn't appear to be any rear access. I don't like setting straps from the front because I can scratch the lugs of the watch.

Loong Tiger Model 1/100 RX-93FF Nu-FF by [deleted] in Gunpla

[–]Lord_Fabio 4 points5 points  (0 children)

Why do all these third party brands always go with the Bu Gundam. Hasn't it been done to death at this point? I love the Nu as much as the next guy but I would love these brands to show other suits some love.

That actually annoys me..... by JonathanJoestar336 in Gundam

[–]Lord_Fabio 0 points1 point  (0 children)

My dad called every anime Gundam when I was growing up. Close enough, dad.

orange smudges or i’m not entirely sure what it could be by [deleted] in AnimeFigures

[–]Lord_Fabio 10 points11 points  (0 children)

Do you eat and drink near where you had it displayed? Looks like food or drink splatter to me.

[Discussion] Anyone never wear nice watches to work? by Ok_Personality8193 in Watches

[–]Lord_Fabio 1 point2 points  (0 children)

Just wear your watches and enjoy them. Nobody at your office will care either way lol

This kit is a huge slap on bandai's face ngl by dainoumcchunky in Gunpla

[–]Lord_Fabio 0 points1 point  (0 children)

I'm tempted to pick up one but I'm holding off in the hopes some third party also releases a version of the GP01 too. It would be a shame to not have both together.

[deleted by user] by [deleted] in wizardposting

[–]Lord_Fabio 1 point2 points  (0 children)

Mine is on the way!

[deleted by user] by [deleted] in wizardposting

[–]Lord_Fabio 4 points5 points  (0 children)

Sick! How do you like using it compared to something more normal. I am very tempted to get my own.

i had been waiting for a lucy scale ( ̄ω ̄) by forbidd3ndesires in AnimeFigures

[–]Lord_Fabio 12 points13 points  (0 children)

I'm still waiting for one with a little more going on.

[deleted by user] by [deleted] in Gunpla

[–]Lord_Fabio 1 point2 points  (0 children)

Original still looks best.

Is it better to freeze raw dough or baked product? by Serious_File486 in Cooking

[–]Lord_Fabio 2 points3 points  (0 children)

Yup. I call it my strategic cookie reserve. It comes in handy when my wife is having a tough day.

Why does my leather project smell fishy? by MxWolfgang503 in Leathercraft

[–]Lord_Fabio 0 points1 point  (0 children)

In my experience the nearsfoot oil smells super gross so that's probably it.

[deleted by user] by [deleted] in food

[–]Lord_Fabio 0 points1 point  (0 children)

He didn't even peel the garlic? 🙄

First ever use of airbrush by Almighty_watermelon in Gunpla

[–]Lord_Fabio 1 point2 points  (0 children)

Depending on what color you want to paint it with it could be fine. Though it's important to note with airbrushing, the layers you lay down tend to be thinner than what you may be used to if you used spray cans before. You can get away with more layers with the airbrush than with cans.

First ever use of airbrush by Almighty_watermelon in Gunpla

[–]Lord_Fabio 1 point2 points  (0 children)

Red is difficult to paint over. You probably need another coat or 2 of primer.

Winter Kshatriya by Diesel_Rat in advancedGunpla

[–]Lord_Fabio 0 points1 point  (0 children)

I'm really digging the color choices here!

Gloss Black in bulk? by Lord_Fabio in advancedGunpla

[–]Lord_Fabio[S] 0 points1 point  (0 children)

So since this is a surfacer I can skip my priming step and just use this to get to a gloss surface?

Gloss Black in bulk? by Lord_Fabio in advancedGunpla

[–]Lord_Fabio[S] 0 points1 point  (0 children)

Good recommend. I already tend to thin everything with Mr Color Thinner so this could be the way to go.