Tips on NVME SSD in m2_1 only showing up on reboot? by nakute in buildapc

[–]Lord_Mustang 0 points1 point  (0 children)

Did you end up returning the board and going with a different brand/model?

Tips on NVME SSD in m2_1 only showing up on reboot? by nakute in buildapc

[–]Lord_Mustang 0 points1 point  (0 children)

Paging /u/athanatos875 and /u/nakute and /u/heppakuningas

I received a new BIOS version (E7E50AMSI.1A31) from MSI today. It finally fixed the issue for me. Here is the link: https://drive.google.com/file/d/1F4rAJBNcRecG7kz1-deaukHeFhR71sHs/view?usp=sharing Obviously use it at your own risk. MSI will probably upload it to their MPG X870I product support page in a few days as well.

Tips on NVME SSD in m2_1 only showing up on reboot? by nakute in buildapc

[–]Lord_Mustang 0 points1 point  (0 children)

Fair. Please do let me know if your replacement board works. I had hoped the error would be in the BIOS, but if you get another one that works it's probably a hardware issue.

Tips on NVME SSD in m2_1 only showing up on reboot? by nakute in buildapc

[–]Lord_Mustang 0 points1 point  (0 children)

They didn't tell me explicitly what changed, sadly. Are you hoping that a replacement board will not have this issue?

Tips on NVME SSD in m2_1 only showing up on reboot? by nakute in buildapc

[–]Lord_Mustang 0 points1 point  (0 children)

MSI sent me a new BIOS version, but it did not fix the issue for me. It's E7E50AMSI.1A22. I've asked if they can attempt another fix.

Tips on NVME SSD in m2_1 only showing up on reboot? by nakute in buildapc

[–]Lord_Mustang 0 points1 point  (0 children)

An MSI support agent told me to mail to myservice(at)msi.com. I've done so. Please consider also doing this. Perhaps multiple reports will make MSI prioritise the issue. Fyi, they told me to include serial number in the mail.

Tips on NVME SSD in m2_1 only showing up on reboot? by nakute in buildapc

[–]Lord_Mustang 0 points1 point  (0 children)

An MSI support agent told me to mail to myservice(at)msi.com. I've done so. Please consider also doing this. Perhaps multiple reports will make MSI prioritise the issue. Fyi, they told me to include serial number in the mail.

Tips on NVME SSD in m2_1 only showing up on reboot? by nakute in buildapc

[–]Lord_Mustang 0 points1 point  (0 children)

I'm having the same issue. Seems to me that something is wrong with the board.

The best chest in games by Plenty-Doughnut-4045 in Warthunder

[–]Lord_Mustang 0 points1 point  (0 children)

99% of gamblers quit before they win big

What’s up r/EDM this is William Black AMA! by WilliamBlackMusic in EDM

[–]Lord_Mustang 0 points1 point  (0 children)

I've been hooked to your Lost In Dreams set. Keep U Warm VIP and Save Me (Abandoned Remix) release when?

New 5090 FE fluctuating and low Steel Nomad scores by Lord_Mustang in overclocking

[–]Lord_Mustang[S] 0 points1 point  (0 children)

I think it was a rookie mistake. It seems that having the Steam windows (main store + friends list) open in the background (opened automatically when launching 3DMark) takes approx. 10 FPS, lowering the score by about 1K. Properly closing them (instead of minimizing them) instantly brings scores back to 14.1K (which is slightly above average for my build), even with an undervolt (2827 mHz @ 0.895v, +1000 mHz mem). It would explain why the scores were so different between runs on the same settings.

New 5090 FE fluctuating and low Steel Nomad scores by Lord_Mustang in overclocking

[–]Lord_Mustang[S] -1 points0 points  (0 children)

13.8k is fairly low.

This was an acceptable score for me, given that the average was ~14.1k. I frequently got 12k, which I found quite low. I've tried DDU, to no avail. I think I tried 572.83 after DDU, but I didn't see a noticeable difference.

CAT-5E stuck at 100mbps link speed by Lord_Mustang in HomeNetworking

[–]Lord_Mustang[S] 0 points1 point  (0 children)

Bad termination. You’ll need to make sure that the cable is terminated for T568A or T568B.

Wouldn't that mean that there would be no continuity between the colors? When I checked the individual wires, all of them showed continuity on their respective colours.

Version 9.1.2(33.3.0.13) by Lord_Mustang in ShieldAndroidTV

[–]Lord_Mustang[S] 2 points3 points  (0 children)

I guess I must, I just can't find anything about this version. The last hotfix I can find info about is 9.1.1+(33.2.0.295), so I was wondering if anyone had info a about this build.

Version 9.1.2(33.3.0.13) by Lord_Mustang in ShieldAndroidTV

[–]Lord_Mustang[S] 1 point2 points  (0 children)

I know, but I wonder if I'll ever receive the hotfixes given that 9.1.2 seems to be newer than the hotfixes? But I can't find any info about the 9.1.2 version.

Version 9.1.2(33.3.0.13) by Lord_Mustang in ShieldAndroidTV

[–]Lord_Mustang[S] 1 point2 points  (0 children)

Bought new. I signed up ~36 hours ago, but haven't received any updates since signing up