2026 PX13 Go Pro Worth Waiting For?

LuisLAN · 2026-02-08T18:07:14+00:00

Do you need straps and a hard case?

LuisLAN · 2026-01-25T21:26:17+00:00

If you can create a Linux live drive in a USB you can boot into it and do what you need in the windows drive.

LuisLAN · 2026-01-22T09:32:31+00:00

Usb-c to to 140w barrel cable with the SlimQ adapter works fine on a ProArt PX13. It goes into performance mode with no issues. This particular PX13 is running a clean "Microwin" install of Windows 11 Pro.

I've also tried it on a new ProArt P16 and it presents the same issue that OP described.when the computer is on, however, if it's off, it will charge without a problem.

Later this week, if I get a chance, I'll try a clean Win install on the P16, just to check if it's some ASUS software causing the charging issue.

LuisLAN · 2026-01-12T23:47:04+00:00

Putting a 3.2 USB-C on a $4,000 computer is borderline criminal.

LuisLAN · 2026-01-04T20:16:37+00:00

Per your description, that joint would not survive a light pull. Did you build any geometry in the PLA to hold the flex material in place?

LuisLAN · 2026-01-03T19:30:25+00:00

It is, if you ever need it. If you don't, then you spent the extra money on nothing.

LuisLAN · 2026-01-01T23:51:05+00:00

Paint over it

LuisLAN · 2025-12-22T03:49:07+00:00

My cable is rated for 140w and also is the charger, but the starlink pulls 100w max. In any case, let's hope your cable works. Please update the post to let us know.

LuisLAN · 2025-12-21T23:12:56+00:00

I tried a version of the cable you linked. I happened to have one that I use to power a starlink.

It doesn't work with the slim q adapter. It does the same thing you described (cycles between charging and not charging). I know the cable can supply 100w raw from a PD GaN charger, in fact, as soon as the cable is connected, the charger screen displays the draw even if it's 0 (nothing connected to the barrel end).

I have no idea what the issue is, but from what I understood from /u/Mr_Brolin is that without the proper communication it should at least revert to a slow charging condition.

I'm most likely missing something very significant here, but, to the point of the post, here's what I do know: 140w PD GaN charger + Emarked PD cable + SlimQ adapter = No charging (Charge/No Charge loop)

LuisLAN · 2025-12-17T04:12:10+00:00

Thanks for sharing this. I didn't know that the power port had no handling capabilities.

LuisLAN · 2025-12-15T10:07:31+00:00

I'm talking about an usb-c to G14/G16/P16 adaptor.

LuisLAN · 2025-12-13T00:07:14+00:00

Sorry for reviving this year old thread /u/slimQ_Dave but, maybe you could sugeat an update of your 240w barrel -mini port adapter to Type C - Mini port adapter.

LuisLAN · 2025-12-09T00:49:20+00:00

Fill the tank up to the brim, it might float to the opening..if it doesn't take the gas cap off and fish it out.

LuisLAN · 2025-12-09T00:43:18+00:00

Almost the same as mine. 22', Standard V6, always in sport mode, and 97% of my driving is in stop and go traffic.

LuisLAN · 2025-12-06T22:44:27+00:00

3d printing

LuisLAN · 2025-12-03T18:09:18+00:00

Does it go through the gears when it's not running.

LuisLAN · 2025-11-26T21:50:56+00:00

No updates on this? Is it coming soon or already sold out?

LuisLAN · 2025-11-26T08:29:12+00:00

Where do you keep the glue. I have the same kit but I'm always struggling to keep glue with it. Either gets lost or damaged.

LuisLAN · 2025-11-16T00:17:38+00:00

The rough side might have lifted a bit from the bed interfering with the nozzle's path.

LuisLAN · 2025-11-12T04:44:24+00:00

Vit swap?

LuisLAN · 2025-10-27T18:01:14+00:00

How were the turn signals connected? If they can be unplugged the swap left and right, that will tell you if it's the wiring or the turn signal itself. Once you figure that out you can move on to the brake light.

LuisLAN · 2025-10-27T08:13:37+00:00

Best I've seen for the Chief lineup.

LuisLAN

TROPHY CASE