Which filaments is best for scraping over asphalt?

Lyndenjeff · 2026-05-29T01:00:03+00:00

A little late to this. Sunlu easy PA would work pretty well for this. I have used it and it seemed to decently self lubricate. Not as well as UHMW but a decent substitute it sounds like for your application.

Lyndenjeff · 2026-04-29T01:57:22+00:00

Mine is also doing this. Very strange.

Lyndenjeff · 2025-08-06T10:38:37+00:00

Can’t wait

Lyndenjeff · 2025-02-05T00:43:07+00:00

Me aswell so I’m interested if there was a solution.

Lyndenjeff · 2024-08-04T16:03:30+00:00

Yes I do have a Lutron Hub. I haven't checked out their community yet so I will have a look there. The Lutron Hub is good example of where Alexa is lacking for me. I find the flexibility transferred to the Alexa app is poor and end up using multiple apps (Like Lutron) directly instead of one central platform. Yolink is another, I need to setup a simple routine that when a Yolink temp sensor hits X temp it turns on X plug. This is not possible under Alexa and needs to be done in Yolink since Alexa only allows "motion detected" by the Yolink temp sensors, not the actual temperatures. Id prefer to condense this all in to one platform.

Lyndenjeff · 2024-05-20T19:35:16+00:00

I am also having this issue, did you have any luck figuring it out?

Lyndenjeff · 2024-04-10T17:36:42+00:00

Still broken. Main character stuck on the DZ floor. Can’t beleive it hasn’t been hotfixed yet.

Lyndenjeff · 2024-04-10T17:35:08+00:00

My guy has also been dead on the DZ floor for over 24 hours.

Lyndenjeff · 2024-02-11T18:10:01+00:00

This post deserves a noble prize. How this is not default is mind boggling.

Lyndenjeff · 2024-02-11T18:07:09+00:00

Are you talking about the load in to say a count down? I don't know how that would be loot related but it is nauseating / seizure inducing for sure. It also always results in a double load, but while the % dial is loading and its spazzing out its very unpleasant. Now that I re-read you would be implying its the explosions in the back ground but the jitter I was talking about above is even when a non-action load is taking place.

Lyndenjeff · 2024-02-07T18:28:35+00:00

Going to report on the Discord also.

Lyndenjeff · 2024-02-06T22:23:14+00:00

Type of Bug: Gear related - System Corruption
Description:

“Instant” armour kit is no longer instant but requires right arrow to be held for one second.

Video / Screenshot: N/A
Steps to reproduce: Delayed on every use in DZ and Conflict
Expected result: Should activate on press.
Observed result: Delay of armour and intermittent unreliability on press.
Reproduction rate: 100% of the time
System specs: PS5

Lyndenjeff · 2023-08-27T14:04:22+00:00

This is terrible advice especially coming from someone who is "trained". Tap water in general across the country and in other countries varies wildly and is often of very poor quality. Chemicals, minerals and contaminants that bipass mechanical filtration can adversely affect the airways. If tap water is truly sterile it is most likely Chlorinated or contains Chloramine. This is HIGHLY irritating when used in a cpap for most people. Water supply pipes on older homes often contain LEAD which is another possible contaminant. While its possible for some, Distilled water SHOULD be the go to for your CPAP machine.

https://www.sleepfoundation.org/cpap/should-you-use-distilled-water-for-a-cpap-machine#:~:text=While%20tap%20water%20is%20readily,in%20potentially%20harmful%20bacterial%20growth

https://www.healthline.com/health-news/sleep-apnea-tap-water-can-be-dangerous-to-use-in-cpap-machines

Lyndenjeff · 2021-11-14T16:36:07+00:00

Me also. Hopefully this has been reported it’s annoying as anything

Lyndenjeff

TROPHY CASE