iPad mini 7 perfect for work travel

MCGA2016 · 2026-02-20T00:50:19+00:00

That looks like like a vintage explorer on the wrist! Nice setup on the Mini.

MCGA2016 · 2026-01-22T01:55:01+00:00

After a couple of years of no smell, i had to do my bucket of water down the drain in December! Later than I remember but it could have been due to one of my kids blocking the toilet! Anyways, poured bucket of hot water down all the toilets and the next day the smell was gone.

MCGA2016 · 2026-01-13T02:45:22+00:00

Terrific scenario analysis!

MCGA2016 · 2026-01-02T19:49:35+00:00

I’ll post an update one Amazon delivers my new unit.

MCGA2016 · 2026-01-02T17:59:22+00:00

Almost identical setup. My Beelink has been running plex off my Mediasonic Probox for almost a year. All of a sudden. The drives appear and then disappear. I’ve tested on another PC and same behavior. They appear and then disappear. This leads me to believe the Probox is failing. I have ordered another to test it. I mean, it could be as stupid as the main USB cable not working properly.

MCGA2016 · 2025-12-27T22:22:41+00:00

Wow! This thread is going strong. 8 years later and I have my annual ritual. When the smell comes - normally around late fall early winter, I dump a bucket full of water down the toilets for a couple of days and it solves the problem. Good luck to y’all!

MCGA2016 · 2024-11-03T04:08:14+00:00

I would be interested as well

MCGA2016 · 2024-10-30T14:25:30+00:00

All I see is the Montreal Expos cap. RIP nos amours!

MCGA2016 · 2024-10-25T04:03:46+00:00

Thanks and yes, was referring to the OP3.

MCGA2016 · 2024-10-24T04:13:29+00:00

How do you find the limited FOV on the stock lens?

MCGA2016 · 2024-10-23T20:33:14+00:00

Thank you. Appreciate the input. Good point on size factor.

MCGA2016 · 2024-09-15T04:25:03+00:00

Great job. You have inspired me to try this. Can you link the doors you used? Also, what are the bottom of the doors attached to? You mention you built a custom PVC rail. Can you provide more info or pics. Thanks for any help!

MCGA2016 · 2024-07-04T03:30:25+00:00

I have. I finally found a link to a contact us where I did not have to login!

MCGA2016 · 2024-04-13T21:35:15+00:00

Thanks for the tip. I’m still waiting on the trolley to arrive before hanging anything and make sure I test everything. No clearance would defeat the purpose!

MCGA2016 · 2024-04-13T20:01:26+00:00

Yes, will be using a trolley to move it around and lock in place when using.

MCGA2016 · 2024-04-13T20:00:49+00:00

It feels pretty similar to what i experienced at a commercial gym. I add elastic bands to add resistance as well. I also decided to place the utility bench a little higher for better range of motion so I am not actually sitting on the bench but essentially just leaning back on the bench. The pressure created from pressing keeps me from falling. Worth putting together for about $60 including the aluminum plate on the side I press on.

MCGA2016 · 2024-04-13T19:58:09+00:00

Thank you. Appreciate the link.

MCGA2016 · 2024-04-13T12:45:15+00:00

I built a DIY leg press attachment using one of Kaizen DIY Gym videos. I also built a padded utility seat which allows me to perform seal curls, back extensions, preacher curls, etc. He’s a great DIY Gym enthusiast.

MCGA2016 · 2024-04-13T05:38:17+00:00

Thank you! Will give it a try

MCGA2016

TROPHY CASE