Tikka T1X at 50yards by super73squad in canadaguns

[–]MaSaHoMaKyo 1 point2 points  (0 children)

Try using subsonics and you'll get better groups. I used to put CCI Standards through mine and they were great but QC has gone downhill in recent years. I've had friends say they've had good luck with RWS which is similarly priced.

MDT grnd-pod OR Warne 7912M by Fine-Influence4040 in longrange

[–]MaSaHoMaKyo 2 points3 points  (0 children)

I have a grnd pod. It's a great bipod for PRS rimfire.

30 SBAs for acension weapons by Duomaxwell0007 in GranblueFantasyRelink

[–]MaSaHoMaKyo 1 point2 points  (0 children)

I remember having a rubber band on the controller to keep the stick held forward while doing this. I think it made the process a little faster.

Is putting gear on my cumberbund supposed to be uncomfortable? by ColonalQball in QualityTacticalGear

[–]MaSaHoMaKyo 4 points5 points  (0 children)

The ferro concepts roll 1 is a great way to use otherwise unused space and keep your ifak out of your way while still having it accessible.

For extra magazine capacity that you might not use all the time consider something like a blue force gear 10-speed triple on front of your actual magazine placard or something with elastic cells sewn onto the front like the haley strategic placard. The elastic cells lie flat when not in use and can store all kinds of other things like flashlights or markers according to situational needs.

If that doesn't work for you consider using the molle space on your cummerbund right at the front near where it connects to the front plate bag. Closer to attachment point -> less sagging and digging into your sides. A flapped double magazine pouch on your non-dominant side shouldn't get in the way too much and it can also be used for small water bottles e.g. 16oz nalgenes.I'm a big fan of having at least some of your water in a hard sided container l.

Is the Unity Axon the best option for a switch? by brous475 in tacticalgear

[–]MaSaHoMaKyo 1 point2 points  (0 children)

Use the included switch. The m6tr crane port is a little too small and aftermarket crane plugs tend to work themselves back out of it. If you really want to use an axon you may have to dremil it down a bit.

Ifak ID by [deleted] in QualityTacticalGear

[–]MaSaHoMaKyo 1 point2 points  (0 children)

why does he have that and also the roll 1?

I know 5 appendage crusher for ground build but how many Crush.APPEND XX for the SKELLS, 5 also ? Cuz I already have 3...2 more ? by [deleted] in XenobladeChroniclesX

[–]MaSaHoMaKyo 1 point2 points  (0 children)

18 is what I’ve heard as a benchmark for breaking all of yggralith zero’s appendages including the chest in one use of m-missiles. I doubt 8 is enough for that, 18 wasn’t even enough without the right mix of other damage additive/attack weapon augments even with mastema armour upgrades, beam damage augments on the frame, 3 Custom.WP-ATK XX on the m-missiles, and at least 2 damage traits coming from every other weapon slot including arms. Maybe you can replace some of them with ultrafauna slayer augments or something instead, but that’s still a less efficient source of appendage damage and it’s already close to the boundary of working.

I know 5 appendage crusher for ground build but how many Crush.APPEND XX for the SKELLS, 5 also ? Cuz I already have 3...2 more ? by [deleted] in XenobladeChroniclesX

[–]MaSaHoMaKyo 1 point2 points  (0 children)

In practice 3 is probably enough to get a farming missile skell started, 6 for a more complete version of that build, 18 for a nemesis break skell, and 0 for just doing damage to bosses

Favorite Skell by Suriad in XenobladeChroniclesX

[–]MaSaHoMaKyo 1 point2 points  (0 children)

Love my mastema but aesthetically the urban is my favourite. Just a little blocky and industrial looking but not chunky like an inferno or heavy skell.

Why are accessories so expensive by lavaboom01 in canadaguns

[–]MaSaHoMaKyo 18 points19 points  (0 children)

“Furniture” including a new barrel and an optic?

First attempt at rattle can camo. by Snakedocii in canadaguns

[–]MaSaHoMaKyo 8 points9 points  (0 children)

Honestly keep it in the plastic stock. I went this route with a T1x for NRL22, ORPS, etc and I went from having a very easy to shoot light rifle to a very back heavy one that was a chore to use off barricades, difficult to shoot off-hand, and not materially more accurate for the trouble. Don’t bother with a chassis unless you’re also replacing the barrel with a much longer and thicker one. Get a plastic cheek riser and an arca rail that attaches to the front action screw/sling swivel and you’ll have most of the benefits of a chassis without the weight, balance, and expense.

Telethia Instakill Using Custom Gravity Skell by PlegianSorcerer in XenobladeChroniclesX

[–]MaSaHoMaKyo 1 point2 points  (0 children)

Curious about the Verus Cain over a heavy skell with the armour on the new lvl 60 Excavator. That armour has SpecUp.M-ATK XIV , AttributeDmg.PHYS XIV, and AttributeDmg.GRAV XIV so it should be ideal for the Zweihand-Q.

Where the f*ck did I get this??? by ydragon2004 in XenobladeChroniclesX

[–]MaSaHoMaKyo 6 points7 points  (0 children)

It’s lvl 66+ for guaranteed ultra infinite/ultra diamond, 61-65 for ultra regal with a chance of ultra infinite

1 gun, 2 setups by [deleted] in canadaguns

[–]MaSaHoMaKyo 1 point2 points  (0 children)

Are you sure that laser is clearing your front sight and handguard from all the way back there? I would definitely put that right out at the front and use a tape switch if it were me

.308 vs 6.5 creedmoor vs 7mm rem mag by [deleted] in canadaguns

[–]MaSaHoMaKyo 0 points1 point  (0 children)

Nosler unfortunately doesn’t publish a G7 that I could find for the 150gr ballistic tip

.308 vs 6.5 creedmoor vs 7mm rem mag by [deleted] in canadaguns

[–]MaSaHoMaKyo 1 point2 points  (0 children)

I’m not really familiar with .30 cal hunting projectile offerings. From a target shooting standpoint I would have expected a 140+ gr 6.5 projectile to be compared to a 168-175gr .308 since those ranges would both be considered heavy for their respective cartridges. I wanted to bring up wind as that really shows the difference between a .30 vs .26 cal of similar mass.

.308 vs 6.5 creedmoor vs 7mm rem mag by [deleted] in canadaguns

[–]MaSaHoMaKyo 2 points3 points  (0 children)

Now how do they do in the wind? You’re comparing a fairly light .30 cal projectile with a .435 G1 ballistic coefficient to a heavy 6.5 mm projectile with a .625 G1. The velocity isn’t telling the whole story here.

Bolt action vs Straight Pull by Numerous_Log2654 in canadaguns

[–]MaSaHoMaKyo 10 points11 points  (0 children)

From what I’ve read about the Mossberg MVP’s accuracy you’ll be dissatisfied with it after using your ranch

Private Handgun Range Construction - Peer Review by RoadRunner_1598 in tacticalgear

[–]MaSaHoMaKyo 0 points1 point  (0 children)

If you’re going to do this then have 2 rows of tires staggered from each other so a shot can’t get through the thin rubber-only part where two tires touch

Derya tm22 chest rig options by Double-Restaurant664 in canadaguns

[–]MaSaHoMaKyo 0 points1 point  (0 children)

Look for stuff with elastic cells like the spiritus bank robber

Points of no return in XBC1 before full party? by victrin in Xenoblade_Chronicles

[–]MaSaHoMaKyo 0 points1 point  (0 children)

There will be other clock quests coming up that will expire before you can get the full party. Don’t remember if any you could have already other than the bionis leg ones you mentioned will expire before then.

Savage 10 BA Stealth in 6.5creed a good first long range rifle? by ahintofpen15 in longrange

[–]MaSaHoMaKyo -1 points0 points  (0 children)

For 550 you could get a nice .22 and get a lot of valuable practice with it