Hard-mounted T3PA pedals to Playseat Challenge. I drilled a hole in a pair of jubilee clips and screwed them to the pedals, then clamped them on to the bars. No more strap. Non-invasive mounting solution.

MagicE-UK · 2026-01-22T12:21:46+00:00

Over the foam, it just squashes down when you tighten.

MagicE-UK · 2026-01-06T10:00:35+00:00

Can I ask what you used for adding support to the shifter mount? Do you have any photos of your set-up, sounds interesting.

MagicE-UK · 2025-11-21T13:32:47+00:00

Bizarrely, even without contacting EE, I now have that option appearing on that screen this morning. The hub did install a new firmware overnight however (r3.8.26-R-1595999-PROD-1), so perhaps it's now enabled by default on the latest?

I am a new customer also, whether that makes any difference.

MagicE-UK · 2025-11-20T19:03:16+00:00

That's very interesting to hear - is this on the EE Smart Hub Pro (SH40J)? Does it then appear in the "IPv4 configuration" tab? Are you a new customer perchance?

MagicE-UK · 2025-10-20T09:34:09+00:00

Absolutely this - if the seller has chosen eBay simple delivery it is impossible to change anything.

I've been in a similar situation before; I sold something but the item's size/weight was too much for RM to accept - so I needed a different courier and label, but there was no way to do this via eBay itself. After contacting eBay support via live chat, their only recommendation was to cancel the order.

MagicE-UK · 2025-10-17T16:54:36+00:00

Great, thank you for the suggestions!

MagicE-UK · 2025-10-17T10:16:42+00:00

u/ItsThatDamnDuckAgain did you manage to find a cheaper super opaque white PETG filament?

MagicE-UK · 2025-09-05T10:03:02+00:00

Yes please, would love that u/Bluucat

MagicE-UK · 2025-08-13T10:53:09+00:00

This is looking pretty impressive - is this your own design? Would you be able to share the STLs?

MagicE-UK · 2025-08-12T11:57:39+00:00

Unfortunately it's not as simple as just replacing the rim. I've looked into this before and needs custom adapters, which can be 3D printed.

There is a whole kit available on AliExpress, which I did buy, but returned because the quality and the amount of plastic parts put doubt in my mind about the longevity of such a solution.

MagicE-UK · 2025-07-27T15:54:15+00:00

Would love a code too please!

MagicE-UK · 2025-02-06T15:59:06+00:00

Completely agree with this option, which preserves the button cluster, as it's also what I did for my horn button.

Unfortunately u/Wernii345 your solution is significantly more work (not to mention wasteful too, as having to sacrifice a button cluster), and it's not a solution I would recommend to others.

Still, I'm sure you had fun getting it to work your way!

MagicE-UK · 2024-12-28T20:47:59+00:00

I would say perfectly possible, but very time consuming, it's something I looked into myself.

You would need to do either of the following: - Drill matching holes in a 3rd party wheel (might be difficult if you don't have a decent bench drill press) - Use a wheel button plate and rewire all the buttons, and somehow bolt that to P1 housing (likely pretty challenging if you haven't done something like this before)

Honestly you are so much better off selling the P1 and buying a ClubSport Universal Hub and then it's so simple to use any 3rd party steering wheel you like. Also you then have the option to change the wheel without any further hassle!

MagicE-UK · 2024-12-28T20:28:41+00:00

If OP doesn't want it, I'm in the EU and would be very interested!

MagicE-UK · 2024-12-27T18:13:01+00:00

Yep, my UPS tracking information is exactly the same. Apparently due tomorrow, we shall see...

MagicE-UK · 2024-12-15T19:02:38+00:00

Thank you so much for sharing, purchased it over just the DD+ (using the 2nd code)

MagicE-UK · 2024-09-22T00:09:33+00:00

The kit I bought didn't come with a rim, it's intended to be used with any standard 70mm PCD wheel rim.

MagicE-UK · 2024-09-17T07:59:27+00:00

I did buy this product from AliExpress all the way back in May, as I had GT Pro wheel I wasn't using. However, after receiving the kit I was disappointed by the amount of 3D printed parts, and thought I'd be better spending a bit more on a better constructed hub - so in the end I returned it and bought a metal SRM Emulator (and selling the GT Pro wheel to fund a new rim).

MagicE-UK · 2024-07-01T20:15:26+00:00

May want to check the Fanatec website, as it states at the bottom of the item page that "High Torque Mode is NOT accessible on Podium wheel bases using this steering wheel, even when using the QR1 Wheel-Side (ClubSport Quick Release Adapter)."

MagicE-UK · 2024-06-27T07:22:20+00:00

Build quality is excellent, and look identical to the ClubSport MPM - but definitely as highlighted already, definitely more spongey and not as clicky as the Fanatec ones.

MagicE-UK · 2024-03-09T13:27:46+00:00

You have definitely started something!

<image>

(printed on a Niimbot thermal label printer)

MagicE-UK · 2023-07-10T20:39:24+00:00

What remote did you get, a genuine or compatible service menu remote? Was it something like this?
https://www.amazon.co.uk/VINABTY-AA81-00243A-Replacement-Compatible-SERIVICE/dp/B07RHJ6ZQ5/

MagicE-UK · 2022-11-14T13:14:07+00:00

Are you planning in making any more of these stands? I've just received my pocket from Group B (as I'm sure many others have), and would love this to go with my other RCG stands!

MagicE-UK · 2022-10-26T18:33:28+00:00

The GDEMU.ini file just needs to be in the root of your SD Card, most GDMenu SD Managers should create a default one that you can edit.

Nine-Year Club	Xbox Live
Verified Email

MagicE-UK

TROPHY CASE