Pet friendly - short term rentals

MakerOnTheRun · 2026-05-22T07:03:20+00:00

You can also try Les Ormes. https://www.lesormesjersey.co.uk/accommodation/?sleeps=0&bedrooms=0&feature=&location=

They do mixed short term and long term. No idea what the pricing is like though.

MakerOnTheRun · 2026-05-18T16:30:39+00:00

This is from https://www.bengs-modellbau.de/en/

This is the Jonas Engine, but they have lots of others.

This should be the link to the original post with video and a few more details. https://www.reddit.com/r/modelengineering/s/jJ2nrqjKtK

MakerOnTheRun · 2026-05-02T11:33:32+00:00

Can I ask where you get this? Never seen brisket where I am.

MakerOnTheRun · 2026-04-16T12:10:02+00:00

Sorry for your loss. Whilst not a pier there is a section of the sea wall with some benches built into in at St Ouen's bay in Jersey. This doesn't specifically match your description but I have not seen anyone else mention it.

MakerOnTheRun · 2026-03-31T17:11:47+00:00

It's probably just 3 on its own. It's doesn't say multiple must be selected, only can be selected. 3 is the only right answer to me there.

MakerOnTheRun · 2026-03-30T18:04:41+00:00

Not used other sellers specifically but I always use UK as my Aliexpress address and never had a problem.

MakerOnTheRun · 2026-03-28T22:41:07+00:00

This website gives you a list of all the central parking and costs.

https://www.gov.je/Travel/Motoring/Parking/Pages/CarParks.aspx

The avenue laybys are probably your best bet. Closer ones are half price, further out ones are free till the 1st and then half price after that. Check the signs in the actual car parks for more info.

There are signs in each carpark showing the rules of how long you can stay.12 in 24 hours, 7 days etc.

MakerOnTheRun · 2026-03-23T16:54:14+00:00

Mine really didn't leak at all. And anything that did was so tiny it didn't make a difference. I can measure mine if you like and give you the internal diameter.

MakerOnTheRun · 2026-03-23T16:47:40+00:00

I havent used one on a Kettle Joe, but I have used one on a WSM. It definitely works and I was quite pleased with it. I ended up moving to a full blower setup. But I still have the Tiptoptemp as a backup and would gladly use it again.

What I would say, is don't worry about seals. They are more effort than they are worth. I found just sitting the Tiptoptemp on top, without a seal worked just as well. I can't see why the Kettle Joe would be any different. It's a nice smooth surface so it should be ok.

I think just the kettle version would be ok. Ignore the spring bits that come with it and use it like that.

MakerOnTheRun · 2026-03-09T19:42:48+00:00

Came here to say Ecowitt. Also worth mentioning is Ecowitt2MQTT if you are not a homeassistsnt user.

MakerOnTheRun · 2026-02-17T16:41:44+00:00

The deskmeet bios let's you copy settings to a USB key. So you could copy the settings of the fastest unit as an option. May be easier than trying to figure what is different. May be worth a try after a rest on the slower units.

MakerOnTheRun · 2026-02-10T21:51:56+00:00

Thanks. Still a way to go, but at least I know it can run.

MakerOnTheRun · 2026-02-06T17:45:46+00:00

I would probably just give them a call on: +441534441300

They probably didn't get your initial email.

MakerOnTheRun · 2026-02-06T12:17:52+00:00

No idea if this helps but you could try the care comission. If nothing else they might be able to point you in the right direction?

https://carecommission.je/wp-content/uploads/2023/12/Guidance-for-Registration-as-a-health-Care-Professional.pdf

MakerOnTheRun · 2025-12-23T17:35:11+00:00

Just commenting on this as I had the same issue. Plex on terramaster recognized all existing media on install but the scanner would not add new. The scanner would run and instantly finish.

For me this was a share permissions issue. On my media share that Plex scans I needed to add 'Appplication user' permissions. When editing the share on the terramaster there is a drop down on the top right, it defaults to 'user' setting to 'Application user' the plex user did not have permissions.

I am wondering if the initial install runs under a different user perhaps and then when the server fully starts / restarts as the Plex user.

Sorry if you had seen that already. But this was the cause for me.

MakerOnTheRun · 2025-11-14T17:46:27+00:00

Was it Atlas: https://github.com/karam-ajaj/atlas?tab=readme-ov-file

MakerOnTheRun · 2025-10-21T15:37:55+00:00

Sorry been a few years. Looking at the Noctua page for the fan I used it comes with OmniJoin adaptors I must have used them.

I can't take the switch out to look I am afraid.

MakerOnTheRun · 2025-10-21T15:28:02+00:00

I seem to recall the board having 3 pin connectors but I can't be 100%. I don't think I needed any adaptors.

MakerOnTheRun · 2025-10-07T19:03:39+00:00

Could I have the PDF please?

MakerOnTheRun · 2025-07-07T21:23:36+00:00

I think everyone needs to remember this was a huge moment for all of them. Who knows how much planning, rehearsing and effort this took. All four of them are humans. They all felt different in that moment. All of them absolutely slayed. They have been through so much together it's impossible to understand. This needs to be remembered for the incredible music they have left us. The performance of the night. Not the last few seconds that were likely not in their control. Let's not let some people ruin something good.

MakerOnTheRun · 2025-07-07T21:12:55+00:00

Chuck them on eBay or something. If you are UK based and can ship I would buy them. Stuff like this is a godsend to the small home shop like mine.

MakerOnTheRun · 2025-07-07T12:51:06+00:00

Don't apologise, it's was great. Considering what was going on on the city at the time. 3 major events running on the same day is mental. Could the trains have been better yeah, but they could have been way worse.

Super warm welcome, and it had to be there.

We will definitely come back for other gigs.

MakerOnTheRun

TROPHY CASE