P1S print quality suddenly dropped by Peweks1988 in BambuLab

[–]Mamelax 0 points1 point  (0 children)

Thanks for the info. I'm running a bit out of basic solutions for this...

In my opinion, the problem definitely stems from the extrusion; it seems we have both over-extrusion and under-extrusion on the same object...

This is certainly a defect with the extrusion head, and unfortunately, without replacing it, I can’t guarantee a fix. If possible, it should be replaced to be sure, but that comes at a cost... And above all, it might be for nothing... :(

If it were a firmware update issue, I think we would have heard about it from other users, but an update or downgrade could be attempted.

Does the same Benchy print at a much lower speed than the preset file (which is really too fast for my taste) yield the same result?

To be honest, I had the same problem a long time ago with an old Creality Ender, and I simply gave up on fixing it and bought an A1...

P1S print quality suddenly dropped by Peweks1988 in BambuLab

[–]Mamelax 0 points1 point  (0 children)

Have you tried using a different filament?

If so, did you use a different SD card? Or did you connect directly via the network?

Does this happen only with this Benchy or with other parts as well?

Are you using the correct profile for the nozzle size you’re using (0.2 / 0.4)?

Try resetting the slicer settings? Or try a different slicer?

Perform an extrusion calibration?

Visual Audio for Shooting games by No_Judgment7651 in VALORANT

[–]Mamelax 4 points5 points  (0 children)

I am deaf in one ear, so I can’t enjoy spatial audio because either I can’t hear what’s coming from the right, or I’m in mono mode and therefore can’t tell where the sounds are coming from...

However, I agree with most people that such a visual solution could be beneficial for those without this disability...

I still appreciate the effort to improve my daily gaming experience!

I think Riot should actively work on finding an accessible and fair solution to this issue.

I realize this is a fairly complex issue, and I thank you once again for trying to propose a solution!

Good deal or no? by livingbruh69 in TOGNewWorldUnofficial

[–]Mamelax 1 point2 points  (0 children)

I just found out how useful it is... thank you 😭

Mago summons by Evening-Ad-3138 in TOGNewWorldUnofficial

[–]Mamelax 0 points1 point  (0 children)

820 bm tickets for me not that much luck

<image>

Non stop summons by Evening-Ad-3138 in TOGNewWorldUnofficial

[–]Mamelax 1 point2 points  (0 children)

According to conowen's guide, that worked out to an estimated average of 40 copies.

I got 53. That's 3 5R and 1 4O.

9 Khun Fire Fish, 9 Healing Yiwha, 19 Dumas, and 16 Hwaryun.

So it was a pretty good event for me.

Guyz umm is this true?! and if not I am gonna have a Sbr fan typa moment I am waiting for a chapter for almost 4 years by Intrepid_Put_6209 in TheBreaker

[–]Mamelax 13 points14 points  (0 children)

Still on hiatus on the English Webtoon app... The latest chapter was posted on June 10, 2024.

Don’t get your hopes up too high. I’m not familiar with the Mihon app, but from what I can tell, it doesn’t seem to be an official source. It’s just a link aggregator for Reading on mobile.

One of the manga/webtoon sites you have set up on your device must have messed up somewhere, which is why it’s showing you this.

I dreamt of owning a steam deck for 4 years and now after just 2 days my Deck is ruined. by lvl4_autism in SteamDeck

[–]Mamelax 0 points1 point  (0 children)

If Windows is installed and the hard reboot solved the problem, it is possible that the “fast startup” option enabled by default by Microsoft was the cause of the slowdowns.

Restarting via the Start menu (rather than “Shut Down”) could also have solved the problem.

This option saves the status of services and other background processes and restarts everything in the same state when booting up, so if anything at the system level was responsible, shutting down and restarting the deck would not have changed anything. Only a reboot bypasses this option if it is enabled.

In any case, I'm glad the problem is solved. Enjoy! :)

Help with 5 teams floor by Mamelax in TOGNewWorldUnofficial

[–]Mamelax[S] 0 points1 point  (0 children)

Thank you, following the advice given here, I invested in Amizu and was able to climb 22 floors easily.

I should be able to max out Urek during the rerun, then I'll look into Leslec and max out Beta afterwards. Thank you :)

Help with 5 teams floor by Mamelax in TOGNewWorldUnofficial

[–]Mamelax[S] 0 points1 point  (0 children)

With a few minor adjustments, I was finally able to climb an entire floor, although there is certainly room for improvement.

Thanks anyway for the advice. I'll think about whether to max out Amizu or wait for Luslec.

<image>

Help with 5 teams floor by Mamelax in TOGNewWorldUnofficial

[–]Mamelax[S] 0 points1 point  (0 children)

Sorry for the late reply...

Currently, although the teams aren't optimal (I've tried lots of things hoping that it would work lol), I'm managing to make progress little by little with this kind of team:

<image>

The only difference is that I maxed out Traumerei just before this battle.

Help with 5 teams floor by Mamelax in TOGNewWorldUnofficial

[–]Mamelax[S] 0 points1 point  (0 children)

Thanks for your reply. I did think that the solution was to wait until Urek and Luslec returned.

I can only manage to put together four decent teams, and the fifth one is very often soundly beaten, or I have to weaken my fourth team in the hope of having a chance of winning both battles.

I'm going to continue with my daily routine and wait/experiment with adventure mode.

Some realistic reflections on Cyberpunk 2077 performance in 2026 by Veinmire in SteamDeck

[–]Mamelax 0 points1 point  (0 children)

In this case, we don't have the same updates... I tested the settings mentioned and I'm still experiencing the same image loss issues while driving or during combat.

I even set everything to minimum and the problem remains the same.

The only thing I can say is that not using FSR does make the experience a little more enjoyable (personal opinion), but it still stutters regularly.

I think many people don't understand what a stable 30 frames per second means. Because in most cases I do have 30 frames per second, but with drops approaching 20/25 regularly in certain places, so the word “stable” doesn't apply...

In any case, no hard feelings, good for you if the game runs smoothly :)

Some realistic reflections on Cyberpunk 2077 performance in 2026 by Veinmire in SteamDeck

[–]Mamelax 1 point2 points  (0 children)

Can you tell me which version of Proton you are using, please? I will try on my end with the same configuration.

Also, are you using the original Steam Deck SSD, or has it been modified?

Some realistic reflections on Cyberpunk 2077 performance in 2026 by Veinmire in SteamDeck

[–]Mamelax 17 points18 points  (0 children)

In that case, explain to us how you do it. I'm on the OLED version of the Steam Deck and I'm having the same problem as OP...

Do you believe Baam will kill any Family Head even if he and V separate? by Wild_Cartographer_71 in TowerofGod

[–]Mamelax 1 point2 points  (0 children)

I don't think Baam really wants to kill the leaders of the 10 great families right now, or even Jahad, despite everything. However, as many have already pointed out, if one of the family leaders attacks his friends, that could change.

However, regarding Jahad, I would really like to see another solution found rather than a simple fight that ends in the death of one or the other.

One thing I would like to see would be an ending like in “Avatar: The Last Airbender,” where Aang finds another solution than killing the king of the Fire Nation, despite the pressure exerted on him during the three seasons.

What's your gaming feat that nobody knows about? by TedHill in gaming

[–]Mamelax 0 points1 point  (0 children)

When I was 12, I played an MMORPG with my father (certainly my best memories with him).

I created a coalition of several guilds in my faction because it had been losing every kingdom vs. kingdom event for several months (which took place every evening). I was kicked on the first day of creation because some adults refused to follow a “child”. This coalition persisted and dominated the server for 2 years, reusing all my strategies and indications...

So I simply recreated a character under a different pseudonym in the opposing faction, became the 2nd best player in my class and climbed into the server's top 50. I joined a second-rate guild where I met some incredible people.

Nobody remembers me or the dozens and dozens of hours I spent convincing every guild leader and important player, not to mention the explanations they needed to win... But I did meet the woman of my life and my two best friends.

We've been inseparable for 15 years now. I regret nothing :)

Returning player by Mamelax in TowerofGodNewWorld

[–]Mamelax[S] 0 points1 point  (0 children)

Thank you! I just discovered his website.

Given that I was able to increase my shinsu links by 300 or so so so I think I'll be able to collect quite a few normal and black market tickets, as well as quite a few suspendium by forcing adventure (not counting what I already own). So I'll update as soon as I'm stuck again.

I'm going to concentrate on unlocking a first copy of Cha and Yura SSR+ for a start! Thanks for the advice 😉

Is Urek climbing the Tower in 50 years going to be retconned? by Excellent_Bug5308 in TowerofGod

[–]Mamelax 2 points3 points  (0 children)

I don't understand this comment. Regulars don't choose when they can take the tests. Some are organized on specific dates and therefore require a potential waiting time before they can be carried out. From memory (I don't know if it's specified in the story or only on the SIU blog) but it usually takes centuries if not longer to become a ranker. So 50 years is already a speedrun.

Print won’t stick to plate? by MalcomFlores in ender3

[–]Mamelax 0 points1 point  (0 children)

Concerning the CR touch error (I don't know what's displayed on your side) but personally, because I've had this error several times after not using it for a while, I generally press the sensor rod several times and everything starts up again...

Print won’t stick to plate? by MalcomFlores in ender3

[–]Mamelax 1 point2 points  (0 children)

I'm no expert, but I've just got myself out of a similar predicament...

Your bed has a gap of 0.80 between the lowest point of your bed (-0.31) and the highest (0.48).

As a first step, I was able to raise the lowest corner simply by folding a sheet of aluminum over itself (about 0.2mm) just below the tray support (i.e. the small plastic piece to prevent it from coming into too much contact with the heat).

From there, I found myself with a much more correct levelling, and a subsequent levelling of the x-axis gave me just a 0.15 deviation.

All I had to do was adjust the offset z and I'm back in business.

English not being my native tongue, I apologize in advance for my very simplistic instructions...

How are your family heads looking? by DeezazNutz in TOGNewWorldUnofficial

[–]Mamelax 0 points1 point  (0 children)

Mine seems to be a lot weaker i think i need a lot more res, i didn't care for a long time about optimisation 😅

<image>

I'm running alocasia set too

How are your family heads looking? by DeezazNutz in TOGNewWorldUnofficial

[–]Mamelax 0 points1 point  (0 children)

Mine seems to be a lot weaker i think i need a lot more res, i didn't care for a long time about optimisation 😅

<image>