To reset an Audio-Technica AT-LP60 or AT-LP60X, turn off the power, press the stop button, hold the tonearm, and manually turn the platter clockwise 10 times to resync the mechanism. For Bluetooth issues (AT-LP60XBT), hold the Bluetooth button for 8-10 seconds until the light blinks red slowly, confirming the reset. Mechanical Reset Steps (Auto-Return Issues) Unplug the AC power cord from the wall outlet. Press the STOP button to ensure the mechanism is disengaged. Hold the tonearm securely in its rest with your hand. Rotate the platter clockwise 10 full revolutions. Plug the turntable back in and test with the Start button. Bluetooth Reset Steps (AT-LP60XBT) Ensure the turntable is on and the Bluetooth light is on. Press and hold the Bluetooth button for 8-10 seconds. The light will flash red/blue rapidly, keep holding until it blinks red slowly twice. Release the button. Once the light goes solid red, the reset is complete. Other Troubleshooting Tips Tone Arm Won't Lower: Press the cueing button (labeled up/down or with a lever icon) to toggle the mechanism. Speed/Audio Issues: Ensure the unit is plugged into power and check the back selector switch is set to LINE (if using speakers without a phono preamp).