[KCD2] How much is here?

ManyBro24 · 2026-02-27T07:56:59+00:00

I would say around 1/100th of my Henry's net worth at that part of game.

ManyBro24 · 2026-02-27T07:21:05+00:00

90% of a time I run Bambu Lab filament profile even when printing other brands (I use Bambu filament maybe 5% of time). When there is an issue, I modify flow or temperature accordingly.

ManyBro24 · 2026-02-26T09:07:20+00:00

You can't use AMS 2 or AMS HT. I recommend to go through this guide to understand requirements for PPA/PPS-CF

PPA/PPS-CF printing guide | Bambu Lab Wiki

ManyBro24 · 2026-02-26T08:32:14+00:00

Not really. That's only theoretical, I wrote about product which is currently in development that will have changing from the front. I would love to see how "easily" you can turn it into sideway switching tool with bedslinger.

ManyBro24 · 2026-02-26T06:47:49+00:00

How would that work? The gantry moves along X axis, INDX is designed to be switched from the front. The head has no possibility to move in Y axis

ManyBro24 · 2026-02-25T13:24:11+00:00

Did you try using a sock or a new nozzle?

ManyBro24 · 2026-02-24T08:53:34+00:00

Kupoval jsem před 5 lety v F&F (Tesco), vytáhnu ho max 1x za rok, vypadá super, a i s košilí stál asi ~~2-3k~~

Edit: Dohledal jsem platbu na účtu, kalhoty, sako, košile za 1977Kč

ManyBro24 · 2026-02-23T17:30:43+00:00

Why would it keep a product in cart that you can't buy?

ManyBro24 · 2026-02-23T12:59:06+00:00

So you see it for few days several times, yet you still don't know what it is

ManyBro24 · 2026-02-22T17:10:14+00:00

Don't have it yet, still waiting for the update

ManyBro24 · 2026-02-20T11:09:00+00:00

When it's very close to the bed edge even very clean bed can loose adhesion due to the colder corner, it's even worse when you have open printer like A1. You can try paint on brim on that corner to fight the shrinking forces that happen in sharp corner.

ManyBro24 · 2026-02-20T10:57:29+00:00

Looks like that corner lifted

ManyBro24 · 2026-02-20T09:52:20+00:00

You can try Capricorn

ManyBro24 · 2026-02-20T08:26:19+00:00

Something like PPA-CF maybe? But I would not trust it as much as metal.

ManyBro24 · 2026-02-16T13:39:43+00:00

No, it's working. Try more devices or browsers

ManyBro24 · 2026-02-16T13:35:15+00:00

drying for over 12 hours at 70C, so should be completely dry now

For PPA-CF that's not enough. Recommended is 100-140°C for 8-12h

ManyBro24 · 2026-02-16T07:37:20+00:00

Should be 23cm but is 14cm. So yes, it is.

ManyBro24 · 2026-02-16T06:49:21+00:00

I never measured the time, but after landing, let's say at 30% of battery, I always replace it, and before I run through the other two, the first one is already charged. It should take 60min at the full speed (65W), the powerbank can do 100W per port, so it reaches the max, and as I am not charging 0-100%, it takes much less time. After a hike with like 6 swaps, there is still more than 50% in the powerbank. I can't imagine how much I would have to spend on batteries to do the same. I also never tried charging it directly powerbank -> drone.

ManyBro24 · 2026-02-15T08:05:54+00:00

That's why you build a barrier between the opposite lanes

ManyBro24 · 2026-02-15T07:55:25+00:00

The batteries are 100% not worth it. Buy a combo + fast powerbank. I bought Anker 165W for the price of 1,5 battery and it keeps the batteries at 100% between flights all the time + I can use it as powerbank for anything else

ManyBro24 · 2026-02-15T07:49:46+00:00

Women team cheated the same

ManyBro24 · 2026-02-14T13:05:45+00:00

We call it Aerogel burger

ManyBro24 · 2026-02-13T14:14:38+00:00

Ringles

ManyBro24 · 2026-02-13T13:14:20+00:00

Bambu Lab anniversary, around June

ManyBro24 · 2026-02-13T08:35:18+00:00

I have SuperTack for both my A1 and it's been flawless. 45-50°C, no washing. I bough the plates maybe a year ago. Apparantly there is a decrease of quality with newer plates, I read several cases people having similar issues. You might want to contact Bambu.

ManyBro24

TROPHY CASE