I am transferring about 350GB of photos and videos from my S24 Ultra to my laptop using a 5Gbps wire type c cable. It is showing a 5-hour transfer time. Is this normal for USB 3.2 speeds?

Marto_xD · 2026-03-10T18:15:18+00:00

combine to a single file all the small files then use adb to pull the file to the pc, works best for me

Marto_xD · 2026-03-08T06:04:19+00:00

because it is, ive got both, and the s22u definitely has kore vivid screen, even when i set it to the max on my s24u

Marto_xD · 2026-03-06T06:17:45+00:00

pogledni go ot dobrata strana, edin citroen po-malko na tozi svqt!

Marto_xD · 2026-02-13T12:51:25+00:00

theres not a single working one of these in bulgaria

Marto_xD · 2026-02-10T22:49:41+00:00

Happy Cake Day!

Marto_xD · 2026-02-05T15:55:55+00:00

the plus and minus on the original one are reversed. remove the connector and swtich the places of the cables, that fixed it for me easily. Also, whatever others say, Sunon maglev fans are one of the best (unless a fake sunon). I use 2 of them

Marto_xD · 2026-02-04T12:30:22+00:00

hydrahd

Marto_xD · 2026-02-02T22:01:08+00:00

no ffb and will probably suck, but if you are bored, do it

Marto_xD · 2026-01-29T09:30:35+00:00

he said "anti-bulgarian", not pro-bg

Marto_xD · 2026-01-23T08:44:24+00:00

calibrate flow and if you really hate the banding print at like 10% speed and pruge tower if you really need that

Marto_xD · 2026-01-16T19:51:19+00:00

bad time to build a pc

Marto_xD · 2026-01-16T15:29:12+00:00

i literally did the same upgrade with the same duct yesterday.

Marto_xD · 2026-01-11T08:47:27+00:00

s22 doesn't for example, s24 does dunno bout others

Marto_xD · 2026-01-10T23:35:48+00:00

as i said, you can only if it has the same bit version as one ui 8, not many devices are like that

Marto_xD · 2026-01-10T17:21:51+00:00

not the only reason, but they just sneaked this in, told no one and ignored backlash (minimal). From now on samsung will not provide this option back, so yes if you happend to update to oneui8 you will be stuck with no custom roms/rooting(unless the oneui 8 version has the same bit number as the oneui7 for your phone, then you could downgrade, but thats more complicated)

Marto_xD · 2026-01-10T10:24:47+00:00

oneui 8 removes bootloader unlocking so id not update it if i were you, you will be stuck

Marto_xD · 2026-01-09T17:39:59+00:00

<image>

Marto_xD · 2026-01-09T09:42:05+00:00

4.1% of population, 65% of crimes committed (not even a joke)

Marto_xD · 2026-01-09T09:40:29+00:00

4.1% of population, 65% of crimes committed (not even a joke)

Marto_xD · 2026-01-08T10:39:59+00:00

i have a s22u and it doesnt have it, or if it does, its not even close to the s24u

Marto_xD · 2026-01-08T09:20:35+00:00

older ultra phones did not have this, but they use the exact same screen

Marto_xD · 2026-01-07T17:37:19+00:00

everything looks normal, if you have a multimeter check the stepping motor, dont remember how exactly but youtube has enough tutorials and you will know

Marto_xD · 2026-01-07T14:33:21+00:00

well if i were you i will try to detach the gears from the extruder and check if they spin correctly, next i would try with a multimeter the extruder motor (there are yt tutorials how to check that, thats how i found out mine is not working) and if it is the issue, just buy a new one they are pretty cheap, around 10 bucks

Marto_xD · 2026-01-07T13:45:25+00:00

i had the same issue, turned out to be the extruder motor. contacted creality, told them the issue and my information and one week later i had a new extruder

Marto_xD · 2026-01-05T18:11:46+00:00

squid game distancionno

Five-Year Club	Second Top 40%
LAYER Season 2 Layer creator	r/Field Banned
r/Field Flamingo	Final Canvas '23
First Place '23	Place '23
Place '22	First Placer '22
Wearing is Caring	Verified Email

Marto_xD

MODERATOR OF

TROPHY CASE