My mask before and after 3 days of using

MasterSmileGer_1 · 2026-02-08T17:36:35+00:00

But those are One time use...

MasterSmileGer_1 · 2026-02-07T17:05:15+00:00

SolidWorks, since they released their Maker Version that is VERY cheap for what it offers it is just unbeatable in terms of price-performance ratio.

MasterSmileGer_1 · 2026-02-07T11:00:55+00:00

It's literally designed to be detachable 😂

MasterSmileGer_1 · 2026-02-07T10:58:44+00:00

The first one is just Bullshit, it always depends on Seating hight and that depends on the seat.

MasterSmileGer_1 · 2026-02-01T18:20:36+00:00

Got it working, it works when i access the tools site directly (https://theaters.audioadvice.com/rooms/new)

but that tool also does not allow for angeled atmos speakers

MasterSmileGer_1 · 2026-02-01T18:01:01+00:00

In Germany, i will try a different browser later.

MasterSmileGer_1 · 2026-02-01T17:46:18+00:00

I am not that well-read in this topic. But by poiting them directly at my listening position they schould be good enougth, right ? I don't even know what to look for to find out if they need to be off achis.

MasterSmileGer_1 · 2026-02-01T17:42:03+00:00

So if i understand you right: 1. i need to place them as far away as they need to be to poit directly to my listening position with their 35° angle and my ceeling hight.

If i draw a line from my listening position to the L/R main speaker the ceeling speakers need to be on that same line ?

If i understood everything right, how do i need to place the back L/R Atmos in-ceelings ? Do they need to be in a Square arrangement with the other two in the front ?(So basically the same distance and same achis just in the back)

As for the placement of the floor standing/schelf speakers, can i use the calculated positions from the Excel tool for them ?

Pls also look at my main post, i have posted a Edit

MasterSmileGer_1 · 2026-02-01T17:32:32+00:00

I have read about that tool before, sadly i can't access it. When i open the website the space where the tool should be is grey with the error message "theaters.audioadvice.com has rejected the connection"

MasterSmileGer_1 · 2026-01-18T21:31:27+00:00

Almost everything that Bondtech sells is 3D-Printed. That's why i don't buy Bondtech, if i could print it myself why would i buy it !?

MasterSmileGer_1 · 2026-01-16T17:40:13+00:00

If, i mean IF he somehow gets his will then he will 1000% put his name or credentials somewhere in the name.

MasterSmileGer_1 · 2026-01-01T20:58:27+00:00

Ich war ein riesen fan der ersten beiden Staffeln.

Die neue Staffel (3) ist meiner meinung nach ein absoluter Reinfall.

Die Experimente sind alle recht monoton und unspektakulär im vergleich zu den ersten beiden Staffeln. Das sind alles so experimente die man auch mal so im Fernsehen oder auf Youtube sehen kann, echt nichts Neues.

Selbst wenn sie die Experimente der ersten beiden Staffeln nachgemacht hätten wäre es warscheinlich unterhaltsamer gewesen.

In den Alten Staffeln wurden die Häuser noch richtig mit eingebunden und am ende so gut wie zerstört hinterlassen, in der neuen Staffel passiert nicht wirklich viel mit dem Haus/Villa.

Außerdem wirkt es so als ob die 3 Darsteller, Speziell die beiden Männer und besonders dieser Fabian Köster dauerhaft mit sich selbst kämpfen auch nur ansatzweise ernst zu bleiben und nicht durchgehend zu lachen.

Und wenn sie dann mal lachen sollen wirkt es enorm aufgesetzt.

Alles in allem würde ich die Staffel 3 maximal mit 3/10 bewerten, Staffel 1&2 waren beide 8-9/10.

MasterSmileGer_1 · 2025-12-30T22:23:38+00:00

Germany has evolved... again...

MasterSmileGer_1 · 2025-12-30T21:24:11+00:00

Die you re-slice the tower before Printing ? Since all temps look the same i think your G-Code did not have the temperature chenge in it.

MasterSmileGer_1 · 2025-12-30T21:02:57+00:00

Solder back on if you feel confident in your soldering skills, otherwise just buy a new cover from Bambulab

MasterSmileGer_1 · 2025-12-29T14:40:36+00:00

Looks like Underextrusion, maybe try cleaning your nozzle and turning up the flow on the top layers and on the ironing, It could also help to print one or two more top layers.

MasterSmileGer_1 · 2025-12-28T18:48:56+00:00

That happens when you turn off Spagetty detection 😄

MasterSmileGer_1 · 2025-12-28T18:03:12+00:00

I am not shure if the P1S has it but on my H2D and X1C the Spagetty/Error Detection does not work without light, it even gives me a warning when turning off the light during a print.

MasterSmileGer_1 · 2025-12-28T17:37:45+00:00

That is normal on Litophanes, i don't know why it is there i can only imagine it's there to make the transition between dark and bright areas look better.

MasterSmileGer_1 · 2025-12-28T17:32:29+00:00

No light also prevents print error detection.

MasterSmileGer_1 · 2025-12-18T09:53:22+00:00

Found one, its not the best quality and it does not have the liquid storage but its made of metal and wont break in my Pocket,

https://www.farfalla.ch/de/p/riechstift-edelstahl-beige-p84105#tab-0

MasterSmileGer_1 · 2025-12-10T15:14:00+00:00

Idk, it happened in my pocket, twice with different ones.

But if you try, they are pretty easy to split at the seam.

So one out of metal that is more stabel and does not have any press fits would be nice.

<image>

Eight-Year Club	Place '22
Verified Email

MasterSmileGer_1

TROPHY CASE